Coaster 300501Q Assembly Guide
PAGE 1 OF 5
300501Q (B1 &B2)
QUEEN SIZE BED
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
REVISION 0 : 06/16/2015
1.
4.
BOLT
ALLEN WRENCH
8 PCS
1 PC
PARTS IDENTIFICATION
2.
3.
LOCK WASHER 8 PCS
FLAT WASHER 8 PCS
ITEM : 300501Q (B1 & B2)
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior to start of assembly
3. Please follow attached instructions in the same sequences as numbered to assure fast & easy assembly.
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately
2. This product is for home use only and not intended for commercial establishment.
HARDWARE IDENTIFICATION
PAGE 2 OF 5
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
A.
1 PC
5.
SCREW
8 PCS
ASSEMBLY TIME 15 MINUTES
B1 (BOX 1) B2 (BOX 2)
HEADBOARD
Z - B2 (BOX 2) - Hardware pack is located in 300501Q (B2)
A.
300501Q (B1)
FROM BOX 1
HEADBOARD
1 PC
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
B.
E.
1 PC
C.
FOOTBOARD
BED RAIL
BED SLAT
BED SLAT SUPPORT
WITH LEVELER
2 PCS
4 PCS
4 PCS
D.
Loading...