CHEST
PAGE 1 OF 4
REVISION 0 : 10/31/2018
215905
ASSEMBLY TIPS:
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
!
1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2.This product is for home use only and not intended for commercial establishments.
ASSEMBLY INSTRUCTIONS
(WITH "F" LABEL)
(WITH "B" LABEL)
STEP 1
PART NAME
FIGURE
QTY
HARDWARE NAME
(WITH "F" LABEL)
FIGURE
QTY
PAGE 2 OF 4
(WITH "B" LABEL)
www.coastercompany.com
STEP 2
215905
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
PAGE 3 OF 4
www.coastercompany.com
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of the
furniture using short screw provided, through the
smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the
wall stud using the long screw provided, through the
smaller hole.
STEP 3
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide
the flat end through the locking end and draw it through until all slack is removed. Confirm that the
strap is securely laced and locked.
PAGE 4 OF 4
www.coastercompany.com
Loading...