Coaster 215881KE Assembly Guide
215881KE (B1 - B3)
EASTERN KING STORAGE BED
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 6
REVISION 0: 10/24/2018
REVISION 1: 01/02/2019
FLAT HEAD SCREW
PAN HEAD SCREW
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
215881KE (B1 - B3)
Warning!
!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
B1 (BOX 1 )
A
B
C
D
PART NAME
HEADBOARD
PANEL
FOOTBOARD
RIGHT
HEADBOARD LEG
LEFT
HEADBOARD LEG
FIGURE
QTY HARDWARE NAME FIGURE QTY
1PC 1 BOLT 6PCS
1PC (1/4" - BLK)
1PC (1/4"ID x 13mm - BLK)
1PC
Z-B1 (BOX1)- HARDWARE PACK IS LOCATED IN
215881KE (B1)
(M6 x 30mm - BLK)
2
LOCK WASHER
3
FLAT WASHER
ALLEN WRENCH
4
(M4 x 60mm - BLK)
6PCS
6PCS
1PC
B2 (BOX 2 )
E
F
G
H
I
J
K
L
B3 (BOX 3 )
M
HB
HEADBOARD COMPLETE
B
BED RAIL
CONCEAL
PANEL
BED SLAT
WITH HOLE
BED SLAT
WITHOUT HOLE
BED SLAT SUPPORT
WITH LEVELER
DRAWER BOTTOM
TRESTLE BAR
DRAWER SUPPORT
RAIL
DRAWER SUPPORT
LEG WITH
LEVELER
DRAWER BOX
215881KE (B1)
FROM BOX 1
215881KE (B1)
FROM BOX 1
FOOTBOARD
Z-B2 (BOX2)- HARDWARE PACK IS LOCATED IN
215881KE (B2)
2PCS 5
(M4 x 32mm - RBW)
6PCS 6
(M3.5 x 20mm - BLK)
2 PCS 7
3PCS 8
8PCS 9
1PC 10
2PCS 11
1PC (M4 x 60mm - BLK)
12
2PCS (M5 x 65mm - BLK)
1PC
1PC
SHORT BOLT
(M6 x 35mm - BLK)
LONG BOLT
(M6 x 50mm - BLK)
LOCK WASHER
(1/4" - RBW)
FLAT WASHER
(1/4"ID x 13mm - BLK)
SMALL ALLEN
WRENCH
BIG ALLEN
WRENCH
14PCS
30PCS
2PCS
9PCS
2PCS
2PCS
1PC
1PC
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 2 OF 6
www.coastercompany.com
Loading...