212423
DRESSER
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 2
REVISION 0: 10/16/2017
REVISION 1: 12/26/2017
REVISION 2: 08/09/2018
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
1
BOLT
2
LOCK WASHER
4PCS
(1/4" - RBW)
3
FLAT WASHER
4PCS
1PC
4
ALLEN
1PC
WRENCH
(M4 x 65mm - BLK)
www.coastercompany.com
ITEM :
212423
PAGE 2 OF 2
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 5 MINUTES
PART NAME FIGURE
A
B
CENTER SUPPORT
C
LEG WITH
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
STEP 1
A
DRESSER
LEG
LEVELER
QTY HARDWARE NAME FIGURE QTY
1PC
(M6 x 50mm - BLK)
(1/4"ID x 19mm - BLK)
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
C
B
C
3
2
1
4
4PCS
4PCS
B
STEP 2 STEP 3
STEP 2.1
C
Adjustable leveler
COMPLETE
STEP 2.2
Loading...