Coaster 212422 Assembly Guide

212422

NIGHTSTAND

ASSEMBLY INSTRUCTIONS

COASTER FINE FURNITURE

www.coastercompany.com

PAGE 1 OF 2

REVISION 0: 10/16/2017
REVISION 1: 12/26/2017
REVISION 2: 08/09/2018

PARTS IDENTIFICATION

HARDWARE IDENTIFICATION

1

BOLT

2

LOCK WASHER

4PCS

(1/4" - RBW)

3

FLAT WASHER

4PCS

4

ALLEN

1PC

WRENCH

(M4 x 65mm - BLK)

www.coastercompany.com

ITEM :

212422

PAGE 2 OF 2

!

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIPS:

1. Remove hardware from box and sort by size.

2. Please check to see that all hardware and parts are present prior to start of assembly.

3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

Warning!

1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.

2. This product is for home use only and not intended for commercial establishments.

ASSEMBLY TIME 5 MINUTES

A

B

STEP 1

PART NAME FIGURE

NIGHTSTAND

QTY HARDWARE NAME FIGURE QTY

1PC

(M6 x 50mm - BLK)

4PCS

4PCS

LEG

(1/4"ID x 19mm - BLK)

NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;

HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.

A

B

3

2

1

4

B

STEP 2 STEP 3

STEP 2.1

COMPLETE

STEP 2.2