Coaster 205260T Assembly Guide

FINE FURNITURE

ASSEMBLY INSTRUCTIONS

COASTER FINE FURNITURE

205260 T (B1 - B3 )

R

TWIN SIZE STORAGE BED

Wwww.coastercompany.com

PAGE 1 OF 8

REVISION 0:07/27/2016

ITEM : 205260 T ( B1 - B3 )

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIPS:

1 . Remove hardware from box and sort by size.
2 . Please check to see that all hardware and parts are present prior to start of assembly.

3 . Please follow attached instructions in the same sequence as numbered to ensure fast & easy assembly.

Warning !

!

1 . Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.

2 . This product is for home use only and not intended for commercial establishment.

PARTS IDENTIFICATION

ASSEMBLY TIME

40 MINUTES

B2 ( BOX 2)

B1 ( BOX 1)

A

B3 ( BOX 3)

F

G

H

I

B

RIGHT
HEADBOARD
LEG 1 PC.

1 PC.

D

BED RAIL

HEADBOARD
ROLL SLAT

FOOTBOARD
ROLL SLAT

WOOD CLEAT

HEADBOARD
PANEL

BED SLAT SUPPORT WITH LEVELER (WITHOUT HOLE)

C

FRONT BACKFRONT BACK

LEFT
HEADBOARD
LEG 1 PC.

2 PCS.

E

STORAGE
FOOTBOARD

2 PCS.

1 SET

1 SET

3 PCS.

1 PC.

J

K

HB

FINE FURNITURE

BED SLAT SUPPORT WITH LEVELER (WITH HOLE)

CONCEAL PANEL

205260 T (B1)

20

R

* FROM BOX 1
HEADBOARD
COMPLETE

PAGE 2 OF 8

1 PC.

E

1 PC.

1 PC.

205260 T (B2)
* FROM BOX 2
STORAGE
FOOTBOARD

1 PC.

Wwww.coastercompany.com

ITEM : 205260 T ( B1 - B3 )

ASSEMBLY TIPS:

1 . Remove hardware from box and sort by size.
2 . Please check to see that all hardware and parts are present prior to start of assembly.

3 . Please follow attached instructions in the same sequence as numbered to ensure fast & easy assembly.

Warning !

!

1 . Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.

2 . This product is for home use only and not intended for commercial establishment.

ASSEMBLY INSTRUCTIONS

HARDWARE IDENTIFICATION

Z- B3 ( BOX 3) -

1

2

3

4

5

6

HARDWARE PACK IS LOCATED IN 205260 T (B3)

LONG BOLT

SHORT BOLT

LARGE FLAT WASHER

SMALL FLAT WASHER

LOCK WASHER

LONG SCREW

12 PCS.

16 PCS.

12 PCS.

12 PCS.

24 PCS.

25 PCS.

7

8

9

FINE FURNITURE

SHORT SCREW

ALLEN WRENCH

WOOD DOWEL

NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY
PROCESS; HOWEVER MANUFACTURER DOES NOT PROVIDE THIS ITEM.

R

PAGE 3 OF 8

4 PCS.

1 PC.

8 PCS.

Wwww.coastercompany.com