201301Q (B1-B3)
QUEEN SIZE BED
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 3
REVISION 0 : 07/04/2011
REVISION 1 : 09/27/2011
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
!
201301Q (B1-B3)
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
A HEADBOARD PANEL
B BED RAIL
C FOOTBOARD
D
E BED SLAT
F BED SLAT SUPPORT WITH 4 PCS
LEFT & RIGHT
HEADBOARD LEG
LEVELER
1 PC
2 PCS
1 PC
2 PCS
4 PCS
HARDWARE IDENTIFICATION
1 ALLEN WRENCH
2 BOLT
3 LOCK WASHER
4 FLAT WASHER
5 FLAT HEAD SCREW
PAGE 2 OF 3
1 PC
8 PCS
8 PCS
8 PCS
8 PCS
www.coastercompany.com
ITEM :
www.coastercompany.com
STEP 1
Align and fasten headboard legs to headboard panel using bolt, lock washer and flat washer and tighten with allen
wrench.
STEP 2
Align and hook the bed rails to headboard and footboard.
201301Q (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 3
Align and fasten bed slat supports to bed slat by turning the bed slat support counter clockwise until tight.
Adjust leveler to level on floor.
Align and fasten bed slat to bed rail using screw and tighten with screw driver. (not included)
PAGE 3 OF 3
Loading...