190822
DINING SIDE CHAIR
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 3
REVISION 0 : 05/30/2018
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
190822
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 15 MINUTES
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
A
B
C
D
PART NAME
BACK FRAME
FRONT LEG FRAME
SIDE RAIL
SEAT CUSHION
FIGURE
QTY
1PC
1PC
2PCS
1PC
HARDWARE IDENTIFICATION
HARDWARE NAME
1
ALLEN WRENCH
(M4 x 110MM - BLK)
FIGURE
QTY
1PC
2
(M6 x 50MM - RBW)
3
4
5
(M6 x 13MM - RBW)
PAN HEAD SCREW
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY
PROCESS ; HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
BOLT
LOCK WASHER
(1/4" - BLK)
FLAT WASHER
(#8 x 1" - BLK)
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR.
www.coastercompany.com
PAGE 2 OF 3
6PCS
6PCS
6PCS
4PCS
Loading...