Coaster 182262 Assembly Guide

Page 1
182262
COUNTER HEIGHT STOOL
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 4
REVISION 0: 01/18/2018 REVISION 1: 08/20/2018
Page 2
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
182262
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 15 MINUTES
PARTS IDENTIFICATION
PART NAME FIGURE QTY
A
BACK FRAME 1PC
B
C
D
E
G
SEAT CUSHION WITH FRAME
RIGHT FRONT LEG
LEFT FRONT LEG
FRONT STRETCHER
F
RIGHT SIDE STRETCHER
LEFT SIDE STRETCHER
1PC
1PC
1PC
1PC
1PC
1PC
NOTE : QUANTITIES SHOWN ARE FOR ONE STOOL.
PAGE 2 OF 4
www.coastercompany.com
Page 3
ITEM :
182262
PAGE 3 OF 4
!
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
HARDWARE IDENTIFICATION
HARDWARE NAME FIGURE QTY
1 SHORT BOLT
(Φ5/16" x 45mm - BLK)
2 LONG BOLT 8PCS
(Φ5/16" x 63.5mm - BLK)
1PC
3
4
5 ALLEN WRENCH 1PC
6
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
STEP 1
LOCK WASHER 9PCS
(Φ5/16" x 10D x 2mm - BLK)
FLAT WASHER
(Φ5/16" x 22D x 2mm - BLK)
(57mm x 4mm - BLK)
FLAT HEAD SCREW 6PCS
(Φ8 x 45mm - BLK)
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
9PCS
www.coastercompany.com
Page 4
ITEM :
STEP 2
STEP 3
182262
ASSEMBLY INSTRUCTIONS
STEP 4
COMPLETE
www.coastercompany.com
PAGE 4 OF 4
Loading...