Coast G50 User Manual

G50 Instructions:

Battery Installation

Turn the end cap in a counter-clockwise direction to remove the cap.
Remove the battery cartridge.
Place three AAA batteries into the cartridge in the direction indicated on the ends of the

cartridge.

Replace the cartridge in the light in the direction indicated by the arrow on the cartridge.
Replace the tail cap and turn it clockwise to tighten it until it is fully closed.

On/Off Operation

The G50 has a rear switch on the tail cap.
To turn on the light, press the switch fully until it “clicks” then release.
To turn off the light, press the switch fully until it “clicks” then release.

Pure Beam Focusing Optic

This flashlight is equipped with COAST’s Pure Beam™ Focusing Optic that allows the user to

choose between a broad flood beam and a focused Bulls-Eye Spot™ beam for long distance

illumination.

To adjust the beam into the Bulls-Eye Spot™ mode, turn the front bezel of the light clockwise.
To adjust the beam into the broad, flood light mode, turn the front bezel of the light counter-

clockwise.

Maintenance: Wipe the external body with a damp cloth. Do not submerge.