CE DF005 THRU DF10
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
FEATURES
Ideal for printed circuit board
Reliable low cost construction utilizing molded plastic
technique
Surge overload rating: 50A peak
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
. Polarity: Polarity symbol marked on body
. Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL DF005 DF01 DF02 DF04
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
current at Ta=40
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
forward current 1.0A
Maximum DC Reverse Voltage Ta=25
at rated DC blocking voltage Ta=125
Typical Junction Capacitance
Operating Temperature Range
Storage and operation Junction Temperature
Note:
1. Measure at 1MHZ and applied reverse voltage of 4.0 volt
Vrrm 50 100 200 400
Vrms 35 70 140 280
Vdc 50 100 200 400 600
If(av) A
Ifsm A
Vf V
Ir A
Cj pF
Tj
Tstg
-55 to +125
-55 to +150
1
50
1.1
10.0
500
25
DF06 DF08 DF10 units
600 800 1000 v
420 560 700 v
800 1000 v
A
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE DF005 THRU DF10
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
RATINGS AND CHARACTERISTIC CURVES DF005 THRU DF10
FIG.1-MAXIMUM NON-REPETITIVE FORWARD FIG.2-TYPICAL FORWARD CURRENT
SURGE CURRENT DERATING CURVE
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2