CNB HDE2412, HDS4824, HDS4848H, HDS4848DV, HDF1212DV User Manual

1

(Model - HDE2412, HDS4824)

Version : 10.11.03

User’s Manual

8/16 Channel H.264 Stand-Alone DVR

▪ H.264 Stand-Alone DVR

▪ Superior Video Quality

▪ S-ATA Hard Disc Drive

▪ USB Mouse & Backup

▪ Advanced Network Features

2

Preface

We welcome you as a new user of the world's best digital video recorder (DVR), and the leading
Digital Video Surveillance System. For effective usage, please read this manual carefully. For
future reference, please keep this manual close to hand.

Copyright/Authentication/Trademark/Limited Warranty

Copyright

This manual is produced under copyright law. None of its contents may be copied or duplicated
without prior approval.
Copyright 2009~

Authentication

CE, FCC, KCC

Trademark

Ethernet(TM) is the trademark of Xerox Corporation.
Microsoft(TM), MS-DOS(TM), Windows(TM logo), Windows(TM) and Windows NT(TM) are the
trademarks of Microsoft Corporation, used in the United States and elsewhere.

Limited Warranty

• The manufacturer, importer and agent shall not be responsible for accidental damage (including
injury) and other damage caused by inappropriate use or operation of this product.

• The information in this manual is prepared based on the current specifications for the product.
The manufacturer is currently adding new functions and will continue to upgrade the product
with new technology. All specifications may be changed without notice to individual users.

Cautions

We strongly recommend that users read all safety cautions carefully before operating the product,
to operate the product appropriately.
Since the indicated cautions contain critical safety information, they must be fully complied with.
The cautions are categorized into Danger, Warning, Caution and Important.

Risk of death or serious injury.
This is the highest priority danger warning.

Risk of serious or lesser degree of injury.
May also cause damage to the product or to property.

Risk of minor injury or damage.

Requirements or limitations regarding operation. Users are
recommended to read the relevant details carefully so as to
operate the product properly and without harm.

The above cautions indicate the degree of damage that may occur due to inappropriate use of
the system.

3

Risk of death or serious injury.
This is the highest priority danger warning.

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF USED
BATTERY ACCORDING TO THE INSTRCTIONS.

• THIS EQUIPMENT IS INDOOR USE AND ALL THE COMMUNICATION WIRINGS ARE LIMITED TO
INSIDE OF THE BUILDING.

• Please connect the power cord only to the type of AC outlet indicated in the manual or product
specification. If connected to other types of power outlet, fire and electric shock may result.

• Do not expose the product to moisture and dampness. Doing so may result in fire and electric
shock.

• Do not place heavy objects on top of the power cord. Damage to the power cord may result in
fire and electric shock.

• Do not place containers with liquid or small metal objects on top of the product. Liquid or small
metal objects getting into the unit may lead to fire and electric shock.

• Do not score, bend, twist, pull or heat the power cord. Damage to the power cord may lead to
fire and electric shock.

• Do not remove the top casing of the product. Doing so may result in electric shock. If internal
examination and maintenance are deemed necessary, contact the authorized system vendors
or installers.

• Do not modify the product in any way. Doing so may lead to fire and electric shock.

• In case of lightning, immediately turn off the power switch and remove the power cord from

the power outlet. Failure to do so may result in fire and electric shock.

• Please use only the power cord supplied with the product. Use of other power cords may result
in fire and electric shock.

• In case of smoke, smell or noise, immediately turn off the power switch and remove the power
cord from the power outlet. Continued operation of the product may result in fire and electric
shock. Request a maintenance service from the authorized system vendors or installers.

• If the product is dropped or damaged, turn off the power switch and remove the power cord
from the power outlet. Continued operation of the product may result in fire and electric shock.
Users should request a maintenance service from the authorized system vendors or installers.

• Do not touch the product with wet hands. Doing so may result in electric shock.

Risk of serious or lesser degree of injury.
May also cause damage to the product or to property.

• Do not leave the power cord or other cables in passageways. Passers-by may trip and fall.

• Avoid contact with water or beverages. Contact with water or beverages may result in damage

that cannot be repaired.

• In case of lightning, immediately turn off the power switch and remove the power cord from
the power outlet. The product may otherwise be damaged.

• Excessive current from the product and the camera may result in an electric shock. Connect the
power cord to an external device only when the products themselves are disconnected from
their power supply.

4

Risk of minor injury or damage.

• If a foreign substance is stuck to the product, remove it using a soft cloth or tissue. Do not use

chemical agents (thinner, solvent, etc.) to remove the substance.

• Do not operate or store the product in the following places.

- An area that is either too cold or too hot

- An area of high humidity, or in front of an air-conditioner, or in places subject to sudden
temperature changes

- An area where there is excessive dust

- Areas where heat from the product cannot be emitted through both of the product's side
ventilation openings

• Do not place credit cards/telephone cards/bank account books/tickets and other objects with
magnetic properties near the product.

• Static electricity may cause damage to the internal parts of the product. Please remove static

electricity from your body before touching the rear panel and internal electronic parts of the
product.

• If this product is damaged beyond repair or reaches its maximum service life, dispose of it in

compliance with local laws and regulations regarding the disposal of lead and plastic waste.

Requirements or limitations regarding operation. Users are
recommended to read the relevant details carefully so as to
operate the product properly and without harm.

• The product may not work properly if the power source is unstable or and if electric shock

occurs. Make sure the correct rated power is available.

• The product is designed to be proof against electric power failures; however, damage may

occur as a result of power failure. Current data may be damaged or data might not be
recorded. Make sure to use an Uninterruptible Power Supply (UPS).

• Since the product is designed to record video data on the hard disk, an error in the hard disk or
other miscellaneous errors might prevent the product from recording properly. Periodic
maintenance is required for proper operation of the product.

• The product is designed for users to configure their own interface. However a user
configuration error could lead to operation malfunction. This product should be set up by
certified installers only.

• Since the product is connected - and tightly coupled - to exterior accessories (camera, sensor,
LAN, Hard Disk, etc.), there is a risk of malfunction from external causes. Ensure periodic
maintenance by the certified installers.

• Use the rack mounting handle provided with the product for installation.

• In this product, 1 Kbyte equals 1,024 bytes, 1 Mbyte equals 1,024,000 bytes and 1 Gbyte

equals 1,024,000,000 bytes.

5

Contents

Preface ............................................................................................... 2

Copyright/Authentication/Trademark/Limited Warranty ................................................ 2

Cautions ................................................................................................................... 2

Contents ............................................................................................. 5

Chapter 1. Introduction ..................................................................... 7

1. The System ......................................................................................................... 7

2. General Features ................................................................................................ 7

3. Specification ....................................................................................................... 8

Chapter 2. System Installation .......................................................... 9

1. Package Contents ............................................................................................... 9

2. Connecting Devices .......................................................................................... 10

3. Cautions............................................................................................................ 12

Chapter 3. Using DVR ....................................................................... 13

1. Basic Operation ................................................................................................ 13

1-1. Front Panel & IR Remote Controller ................................................................... 13

Description ....................................................................................................... 13

1-2. Turning on the System ...................................................................................... 14

1-3. Menu Bar ......................................................................................................... 15

1-4. Display Icons ................................................................................................... 15

1-5. User or Admin Login ......................................................................................... 16

1-6. The Main Menu ................................................................................................ 17

1-7. Contextual Menu .............................................................................................. 18

2. DVR Configuration ............................................................................................ 19

2-1. SYSTEM ........................................................................................................... 19

2-1-1.MENU>SYSTEM>Information ................................................................... 19

2-1-2. MENU > SYSTEM > Date & Time ............................................................. 20

2-1-3. MENU > SYSTEM > User ......................................................................... 21

2-1-4. MENU > SYSTEM > Quick Setup .............................................................. 22

2-1-5. MENU > SYSTEM > System Log .............................................................. 22

2-2. DEVICE ............................................................................................................ 23

2-2-1. MENU > DEVICE > Camera ..................................................................... 23

2-2-2. MENU > DEVICE > Audio ........................................................................ 24

2-2-3. MENU > DEVICE > Alarm........................................................................ 24

2-2-4. MENU > DEVICE > Keyboard .................................................................. 25

2-2-5. MENU > DEVICE > RS232 & RS485 ......................................................... 25

2-3. DISPLAY .......................................................................................................... 26

2-3-1. MENU > DISPLAY > Display .................................................................... 26

2-3-2. MENU > DISPLAY > Monitoring ............................................................... 27

2-4. RECORD .......................................................................................................... 28

2-4-1. MENU > RECORD > Storage ................................................................... 28

2-4-2. MENU > RECORD > Record..................................................................... 29

2-4-3. MENU > RECORD > Record Tools ............................................................ 30

2-5. NETWORK ....................................................................................................... 31

2-5-1. MENU > NETWORK > Address ................................................................ 31

2-5-2. MENU > NETWORK > DDNS ................................................................... 32

2-5-3. MENU > NETWORK > Notification ........................................................... 33

2-5-4. MENU > NETWORK > Transmission ......................................................... 33

6

2-6. EVENT ............................................................................................................. 34

2-6-1. MENU > EVENT > Sensor ....................................................................... 34

2-6-2. MENU > EVENT > Motion ....................................................................... 35

2-6-3. MENU > EVENT > Video Loss .................................................................. 37

2-6-4. MENU > EVENT > Text-In ....................................................................... 38

2-6-5. MENU > EVENT > System ....................................................................... 40

3. Playback ........................................................................................................... 41

3-1. Go to Time....................................................................................................... 41

3-2. Calendar Search ............................................................................................... 42

3-3. Event Search .................................................................................................... 42

3-4. Text-In Search .................................................................................................. 43

3-5. Backup Data Playback ...................................................................................... 43

3-6. Playback Control .............................................................................................. 43

4. Backup .............................................................................................................. 44

4-1. Backup ............................................................................................................ 44

4-2. Instant Backup ................................................................................................. 45

4-3. Clip Maker........................................................................................................ 45

Chapter 4. Network Monitoring ....................................................... 46

5. Web Viewer ...................................................................................................... 46

5-1. Login ............................................................................................................... 46

5-2. Live ................................................................................................................. 46

5-3. Playback .......................................................................................................... 47

5-3-1. Calendar Search ..................................................................................... 48

5-3-2. EVENT Search ........................................................................................ 48

APPENDIX ........................................................................................ 49

A-1. DDNS(Dynamic Domain Name Server) ......................................................... 49

A-1-1. Use DDNS service after signing up for autoipset.com....................................... 49

A-1-2.Use DDNS without signing up for autoipset.com ............................................... 52

A-2. Compatible HDD Models ............................................................................... 53

COMPLIANCE NOTICE OF FCC: ............................................................................. 54

WEEE (Waste Electrical & Electronic Equipment) ................................................. 54

ROHS Compliance ................................................................................................. 54

7

Chapter 1. Introduction

1. The System

Great Value but Less Budget Product is in Your Hand now. No more to find high quality product
with affordable target price in the market. As part of 4 ~ 16 channel DVR series, this DVR is the
exact solution what you looking for in four channel DVR. The big demand of real H.264 four
channel DVR with high performance and stability but pay less from end users make it possible to
launch the DVR.
With our full built-in function, you don't need to waste of your time to find four channel solution
of yours. Now you can have the great value product from us to make your full H.264 DVR product
line unique.

2. General Features

• True H.264 Standard Video Compression

• Embedded Linux System to give you the Ultimate Reliability

• Dedicated DB Structure for Stability

• Various Recording Resolution D1/Half D1/CIF

• CMS (Central Monitoring System)

• Easy Setup same like DVR GUI in CMS

• Web Monitoring, Searching and Setup

• Own Media Player for Backup Playback

• Four USB Port for Mouse operation, Multi USB Hub and Backup

• Up to Four SATA HDD and No Limitation of Capacity

• Two- Way Audio

• Multiple DVRs can be operated with One Keyboard Controller

• Text-In & Relay Output Support

• 4 Audio Input support

• Spot Output with Event Pop up Function

8

3. Specification

Model

8 Channel

16 Channel

Video

In

8 BNC

16 BNC

Out

1VGA,& 1 BNC Main, 1 Spot Output

Audio

In

4 RCA (Line-In)

Out

1 RCA (Line-Out)

Device

Sensor In

8 TTL

16 TTL

Alarm Out

2 Relay + 2 TTL

I/O Interface

RS232, RS485, USB2.0 x 3, USB1.1 x 1 for Mouse

Display

Speed

Real Time

Resolution

720 x 480 (NTSC), 720 x 576 (PAL)

Split Screen

1,4,9,PIP,Digital Zoom

1,4,9,13,16,PIP,Digital Zoom

Recording

Compression

H.264 Codec

Speed /

Resolution

120fps@CIF(NTSC)

100fps@CIF(PAL)

60fps@Half D1(NTSC)

50fps@Half D1(PAL)

30fps@D1(NTSC)

25fps@D1(PAL)

240fps@CIF(NTSC)

200fps@CIF(PAL)

120fps@Half D1(NTSC)

100fps@Half D1(PAL)

60fps@D1(NTSC)

50fps@D1(PAL)

Picture Quality

Very High, High, Standard, Low

Mode

Time-lapse, Event, Time & Event, Emergency (Panic)

Playback

Display

1, 4, 9, Digital Zoom

1,4,9,13,16,Digital Zoom

Search Mode

Calendar Search, Event Search, Text-In Search, Go to Time

Playback Mode

Multi Channel Normal & Reverse Play,

RW & FF ( x2, x4, x8, x16, x32), Frame to Frame, Pause

Network

Interface

Ethernet (10/100 Base)

Protocol

TCP/IP, HTTP, DHCP

Application

Live, Playback, Setup, Notification (Callback, E-Mail)

Web Browse

Internet Explorer 7 or higher

Storage

3xSATA HDD & 1xSATA ODD (or max. 4 SATA HDD w/o ODD)

Backup

CD & DVD-RW, External HDD(USB), External USB Memory

Control

Front Panel Button, USB Mouse,

IR Remote Controller, Joystick Controller

OSD

Graphic User Interface (Multilingual)

Approval

FCC, CE, KCC

ROHS

ROHS Compliance

Power Consumption

DC12V, 6.67A (80W)

Operating Temperature

5°C ~ 40°C / 41°F~104°F

Operating Humidity

0%~80% / non-condensing

Dimension

430(W)x88(H)x428(D)mm / 16.93(W)x3.5(H)x16.85(D)inch

Weight

6Kg / 13lb (without HDD)

9

Chapter 2. System Installation

1. Package Contents

The following components are included in the product:

DVR Unit

DC Adaptor

Power Cord

CD

(User's Manual

& Network S/W)

Remote Controller

Quick Guide

10

2. Connecting Devices

The rear panels of the DVR comprise the following:

[8 Channel Model]

[16 Channel Model]

Video Input

Connect the coaxial cables from the cameras to the BNC video connectors.

Loop-Through Video

Connect the coaxial cables from the Loop BNC connector to another device.

Audio Input

The DVR can record audio up to 4 sources. Connect the audio sources to the Audio-In RCA
connectors. Audio input channels need external pre-amplifiers.
It is the user's responsibility to determine if local laws and regulations permit recording audio.

Video Output

Connect the main monitor to either the Video Out (CVBS) or VGA out connector. Connect the spot
monitor to the SPOT connector as needed.

11

ETC

• Audio Out: The DVR does not have amplified audio output, so you will need a speaker with
and amplifier.

• RS-232C: An RS-232C connector is provided to connect an ATM or POS machine for Text-In
function. Use a cable with a DB9 (female) connector to connect to the DVR.

• Network: Connect a Cat5 cable with an RJ-45 connector to the DVR connector for remote
monitoring, remote playback, remote setup. See

Chapter 3-2. DVR Configuration

for

configuring the Network connections.

• USB: Four USB ports are provided to connect external devices like HDD, ODD, Flash memory
for Backup, System upgrade or USB mouse. Two USB ports is located on the rear panel and the
other two are on the front panel. A USB mouse can be connected only front panel USB port
dedicated only for mouse.

• Reset: The DVR has a Reset switch that will only be used to return all the settings to the
original factory settings. To reset the unit, turn the DVR off first. Turn it on again while poking
the straightened paperclip in the reset hole. Hold the switch until the DVR is initializing.

• Power Connector: Connect adapter cable to the power connector on the rear panel. (DC12V,

6.67A) Input AC power to the adapter. (free voltage from 100V to 240V, 50/60Hz)

Sensor Input

16(8) sensor input connectors are provided to connect external devices. You can use sensors to
signal the DVR with event. To make connections on the terminal block, press and hold the button
and insert the wire in the hole below the button.

Alarm Output & RS485

4 alarm output connectors are provided to connect external alarms such as sirens or lights. 2
alarm output connectors have internal relays and the others are TTL signals.
The RS485 connector can be used to control PTZ cameras. The DVR can also be controlled
remotely by a control keyboard.

• Front USB: Two USB ports are provided to connect external devices like HDD, ODD, Flash
memory for Backup, System upgrade or USB mouse on the front panel. A USB mouse can be
connected only front panel USB port dedicated only for mouse.

Note

: This manual covers 8-channel and 16-channel DVRs. The DVRs are identical except for the
number of cameras, audio inputs and alarms. The illustrations and descriptions in this manual
refer to the 16 channel model.

12

3. Cautions

• Avoid installing the product where there are direct rays or it is hot by locating near from heat

generator. (May cause fire)

• Do not put vase, flowerpot, cup, cosmetics, drug, and anything the contain water on product.

(May cause fire or electric shock, and it may injure people by falling)

• Do not insert or drop any metal object (coin, hair pin) or flammable object (match, paper) into

air hole. (May cause fire or electric shock)

• Do not put any heavy object on it. (May injure people by being fell or destroyed.)

• Put power plug surely not to be moved. (If not, this may cause fire.)

• Unplug power plug and antenna when there are thunders and lightening. (May cause fire.)

• For cleaning the product, wipe surface with dry towel. Using chemical agent or cleaner may

change the color and unpeel paint.

• Do not put several plugs at same time. (May cause electric shock.) If there is smoke or strange

smell, stop operation. In this case, turn the power off and unplug it, and then contact our
service center. (If you keep using it, this may cause fire or electric shock.)

• Do not unplug by pulling cord. (If cord is damaged, it may cause f ire or electric shock.)

• Do not plug or unplug with wet hands. (May cause electric shock.)

• Keep the power cord untwisted. (May cause f ire or electric shock.)

• Use proper adapter. (Using too much electric power may cause fire or electric shock.)

• Do not install it at where exposed to rain and wind and water drop. (May cause fire, electric

shock and transformation.)

• Keep away from fire. (May cause fire.)

• Do not disassemble or remodel on your own. (May cause malfunction or electric shock.)

• Do not put next to flammable materials like flammable spray. (May cause fire.)

• Do not install it at a place with too much dirt. (May cause fire.)

• Do not install it on unstable places like shaking table and inclined place or shaking place. (May

injure users by falling down or being upside down.)

• Do not put an heavy object on power cord or avoid it from being pressed by the device. (May

cause fire or electric shock.)

• In case of using extension cord, do not use several devices at same time. (May cause fire with

abnormal heating of extension.)

• When there are dirt on power plug pin or power outlet, clean it nicely. (May cause fire.)

• Do not damage on power cord or plug, and bend or twist or pull too much, and put it between

other objects or heat. If power outlet insertion part is not tight, do not use it. (May cause fire
or electric shock.)

• Do not drop or give a shock to the product. (May injure people or cause malfunction.)

• Do not touch power adaptor or signal controller. (May cause electric shock.)

• Do not put any object too close to block cooling fan. (May cause fire.)

• In case of exchanging batteries with improper type, there might be danger of explosion.

• For used batteries, throw away separately from other garbage.

• When you take out batteries, avoid children from eating them by mistake. Keep them away

from children. (If a child ate them, contact a doctor right away.)

13

Chapter 3. Using DVR

1. Basic Operation

1-1. Front Panel & IR Remote Controller

The DVR should be correctly installed before proceeding. The location and the shape of the
buttons may vary depending on the DVR model. (In 4-channel DVR, Only some of main buttons
most commonly used can be found on the front panel.)

Control

Description

USB Port

Two USB ports are located on the front panel. A USB mouse can
be connected USB port dedicated only for mouse as picture
directed.

Camera Buttons (1~0)

Pressing camera buttons and Enter button will cause the selected
camera to display full screen. Buttons are used to enter
passwords.

MENU / EXIT Button

Enters the Setup Menu. User will need to enter the authorized
password to assess Setup. In Playback mode, MENU button
displays the Playback Menu.

DISPLAY Button

Changes the screen display mode in the current screen or
playback screen.

SEQUENCE Button

Displays live channels sequentially.

Up, Down, Left, Right

Arrow, ENTER Buttons

These are used to change settings for the product in MENU
mode or used in PTZ control mode. (pan, tilt)

BACKUP Button

Copies recorded data to an external storage device.

PLAYBACK Button

Changes to the playback mode from the live mode.

PAUSE Button

Under playback mode, the button can be used to pause the
playback screen.

- Display menu to save PTZ preset under PTZ mode.

PLAY Button

Plays the video forward. Press the button repeatedly to increase
play speed up to max 32 times (1, 2, 4, 8, 16, 32 times) faster.
Use this button to move right when setting the menu.

- Focus on far distance under PTZ mode.

R.PLAY Button

Plays the video backward. Press the button repeatedly to
increase play speed up to max 32 times (1, 2, 4, 8, 16, 32 times)
faster. Use this button to move right when setting the menu.

- Zoom Out under PTZ mode.

STEP FORWARD Button

Move forward by one frame under Pause. Use this button to
move up when setting the menu.

- Focus on near distance under PTZ mode.

STEP BACKWARD Button

Move backward by one frame under Pause. Use this button to
move down when setting the menu.

- Zoom In under PTZ mode.

14

EJECT Button

It will open or close the backup drive such as CD-RW or DVD

- Display menu to load PTZ presets under PTZ mode.

PTZ Button

Changes to the PTZ control mode from the live mode.

ZOOM Button

Zooms the current image on the screen.

PIP Button

Changes to PIP screen mode from live screen.

FREEZE Button

Freeze the current screen.

AUDIO Button

Selects a camera for live & playback audio output.

SPOT Button

Assigns the SPOT output channel.

OSD Button

Turns on/off the OSD display.

LOG Button

Checks the system‟s log information.

ID Button

Selects the DVR system ID. (Remote controller only)

E.REC Button

Pressing the E.REC button stars Emergency Recording Mode of
all camera channels, and displays "!" on the screen. Pressing the
button again will stop E.REC mode.

Status LED

Power, HDD, Network, Alarm

1-2. Turning on the System

Connecting the power cord will turn on the power of DVR. It will take approximately 10 to 30
seconds for the system to be initialized. Once the system is initialized, it will display live screen,
and begin to record video automatically.

Note

: To turn off the system, select SHUTDOWN under main menu (MENU > SHUTDOWN) and

unplug the power cord when the shutdown message appears.

Note

: When installing the HDD for the first time, the HDD should be formatted first.

“MENU > RECORD > Storage > HDD format”

15

1-3. Menu Bar

The menu bar will appear on the bottom of the screen as shown below.

Pressing the Menu will bring up the main menu list.

Shows the % of HDD being used.

Turns on when the HDD is set to be overwritten.

Sequence display mode.

Turns on when the system is connected to the network.

Turns on when the Alarm is being activated.

E.REC (Emergency Recording) Mode.

Displays date & time.

IR Remote Controller

1-4. Display Icons

No Recording

Recording (Red)

E.REC (Emergency Recording)

Event Recording (Red)

Pre Event Recording (Blue)

Motion Detection

Sensor Detection

Text In

PTZ Camera

Instant Backup

Clip Maker (Blue)

Backup (Red)

Video Loss

16

1-5. User or Admin Login

Press MENU to enter main menu screen. Login in screen appears to enter ID (Admin or User) and
Password. Password can be set up to 8 numbers by the combination of numbers from 0 to 9. The
factory default password is „1111‟ so press “1111” and OK to log in to the system for a first time
log in. Password can be set under password set up option (MENU > SYSTEM > User). System will
be automatically log out if it is not in-use for some time. This "Auto Logout Time" can be set
under password set up option (MENU > SYSTEM > User).

17

1-6. The Main Menu

The Main Menu of DVR consists of SYSTEM, DEVICE, DISPLAY, RECORD, NETWORK and EVENT.
And each menu consists of various sub menus that allow detail set up of the system. Use Mouse,
Remote Controller or Front Buttons to access to each menu.

Note

: Please make sure the system log out is done when the system setting or operation

completed to prevent any unauthorized changes of system settings or operations.

MAIN MENU

SYSTEM

Information

Date & Time

User

Quick Setup

System Log

DEVICE

Camera

Audio

Alarm

Keyboard

RS232 & RS485

DISPLAY
Display

Monitoring

RECORD

Storage

Record

Record Tools

NETWORK

Address

DDNS

Notification

Transmission

EVENT

Sensor

Motion

Video Loss

Text-In

System

LOGOUT

SHUTDOWN

18

1-7. Contextual Menu

Additional Contextual Menu screen appears by pressing right button on the Mouse. Layout option
allows changing Camera on the monitor. Select preferred camera display option on the monitor.

Camera : Select camera no.
Layout : Select display mode (8/16 Ch. DVR Only)
OSD : Select OSD display option
Text-In Info: On/Off Text-In OSD.
Freeze : Pause current image display
Sequence : Begin sequence display
Zoom : Zoom in image by X2
PIP : Select PIP mode and camera
Spot : Select each spot monitors‟ display
Audio : Select Audio outs
PTZ : Select PTZ options
Backup : Select backup options
Playback : Playback recorded data
E. Record : Start Emergency Recording
Log : Select System/Event log
Eject : Eject installed ODD
Setup Menu: Enter Main setup menu

For more information on Contextual Menu please refer to 2. DVR Configuration.

19

2. DVR Configuration

2-1. SYSTEM

Under SYSTEM menu, System configuration options for general Information, Date &Time, User,
Quick Setup and System Log can be selected.

2-1-1.MENU>SYSTEM>Information

In the Information screen, DVR Name, System Version, Upgrade, Mac Address and Configuration

options can be selected. Highlight and press DVR Name to enter or change DVR name. Name
the DVR by using the virtual keyboard.

To Upgrade the system, save the upgrade file to USB Flash Memory and connect it to DVR. Once
the Device is connected, press Upgrade button to execute system upgrade.
Upgrade will take approximately 5 minutes. DVR will reboot automatically when the upgrade is
completed.

Note

: DO NOT remove USB Flash Memory or turn off the system during the upgrade. Removing
USB Flash Memory or Turning off the system during the upgrade may cause system
malfunctioning.

Remote Control ID

Enter Remote Control ID to control multiple DVRs individually. If Remote Control ID remains as 0,
Remote ID does not have to be selected when using remote controller. It will work as general ID
for any remote controls and a remote control will communicate with any DVRs with ID 0.

Video Type

The system automatically detects camera signal types as NTSC/PAL. But the system also offers
manual selection options for different signal types.

Configuration

System settings can be saved and loaded using Configuration option

Export: Save settings to USB Flash Memory
Import: Load saved settings from USB Flash Memory
Default: Load factory default settings

Note

: Configuration Import does not affect or changes system and network settings.
Network settings will also not be changed when selecting Default option.

20

2-1-2. MENU > SYSTEM > Date & Time

In the Date & Time, Time Zone, Date, Time,
NTP Server, Holiday options can be selected.

Highlight and press Time Zone to select
right Time Zone.

Select „Use Daylight Saving Time‟ if it is

applicable. Enter start and end date/time for

local „Daylight Saving Time‟. Press button

to set up Date and Time. Press Format

button to select a date & time display format.

Select „Use NTP‟ to enter Time Servers to be

synchronized with DVR. Highlight and press
to enter Time Server using the virtual keyboard.
Press „Update‟ to synchronize the DVR time
with the registered time server.

Note

: NTP is not essential for DVR operation.
Any type of Standard Time Server can be used
(e.g. time.windows.com). Time Synch might
not be completed due to heavy traffic or delays
from the Time Synch server.

Press Holiday to set specific dates for Holiday

setup. Set specific date by pressing button.

Change and delete dates using and
buttons.

Note

: There are some Holidays falls on
different days. Therefore, they have to be
updated every year.

21

2-1-3. MENU > SYSTEM > User

Press User Tab to enter/add a new user.

Auto Login: It allows a user to log in right after the system boots up automatically. As a system
allows auto log in without the authentication process please make sure DVR has a limited access
by non authorized personnel.
Auto Logout: Turn On or Off Auto Logout option.

Press to add a new user. To remove an existing user, press next to it.

User Name: Enter a user name
Group: Select a Group which a new user will belong to
Password: Set a new password or change a password.

Note

: Default password is “1111”

Note

: Do not use “admin” as an user name since it may cause a fatal error.

Set user registration and access rights for the system. Press Group tap to add and set group.

Press to add a new group. Enter a group name and select access rights for a group. To

remove an existing Group, press next to it.

22

2-1-4. MENU > SYSTEM > Quick Setup

Quick Setup Menu allows easy and basic setup for main menu settings.

2-1-5. MENU > SYSTEM > System Log

In the System Log, full list of system logs can
be searched.

Press Reload button to refresh log list. USE

button to search log list page by page.

Log list can be export in txt format.

23

2-2. DEVICE

Under Device menu, Device configuration options for Camera, Audio, PTZ, Alarm & Buzzer,
Keyboard and RS232 & RS485 (POS/KeyboardPTZ/Keyboard) can be selected.

2-2-1. MENU > DEVICE > Camera

Set Camera display option. Camera display (video loss display) can be disabled by unmarking the

box next to it if there is no camera connected. Press to change Camera title. Press button
under Type to select Monitoring option.

Press Setup button under Color to adjust video color. Click or drag a control box to adjust each
color level.

PTZ Control

Select channel connected with PTZ camera.
Select PTZ from the contextual menu appears
by pressing right mouse button.

Note

: PTZ can only be controlled in single

screen mode.

Use icons on screen to control PTZ. By using a mouse, click arrows to move around PTZ and click
icons for each functions of PTZ camera.

Zoom Out

Zoom In

Focus on near distance

Focus on far distance

Save Presets

Load Presets

24

Covert Setting

Covert setting allows the privacy on monitoring.
If Covert is set, live image will not be displayed.
Covert can be scheduled by day, time and mode
by cameras.

Covert Low Mode: No display of video image
on screen but OSD still remains on screen.
Covert High Mode: Neither of video image or
OSD will be displayed on screen.

Note

: Any Covert options will not affect recording data as it only changes monitoring conditions.

2-2-2. MENU > DEVICE > Audio

Select Audio for Audio recording.

2-2-3. MENU > DEVICE > Alarm

Alarm duration: Set Alarm activation time from 5 seconds to 10 minutes.

Select Schedule tap to schedule Alarm operation. Alarm can be set by day, time, mode and inputs
(camera).

Press to choose Alarms and set Buzzer with
Alarm activation.

25

2-2-4. MENU > DEVICE > Keyboard

Press to find and select keyboard from the
list.

2-2-5. MENU > DEVICE > RS232 & RS485

Press to select a device for each ports.
RS232: Supports Text In (POS) device. PTZ
and Keyboard
RS485: Supports Text In (POS) device ,PTZ
and Keyboard.

Note

: Text In devices (e.g. Cash Register)
needs to use ASCI code for Text In info on DVR

26

2-3. DISPLAY

Under Display menu, Display configuration options for OSD and Monitor can be selected.

2-3-1. MENU > DISPLAY > Display

Language: Select system language. Press

to find available language options.
Hide Status Bar: Select On/Off and time to
hide Status Bar when system is not in use.
OSD margin: Set OSD margin (position) using

.
Freeze: Display an image in either Field or
Frame format when it is in still (freeze) mode.

Layout: Allows to change or reallocate video
inputs‟ (cameras) displays.

Various resolution options are available for
different types of monitors. Please select
monitor resolution under VGA tap menu.

PIP (Picture In Picture) size and its display
positions can be selected under PIP menu.
Please select desired size and positions of PIP
display.

27

2-3-2. MENU > DISPLAY > Monitoring

Event Pop-up: Pops up the camera image in

full screen when pre-set event occurs.
Sequence Interval: Set time interval between
cameras under sequence mode.

Event Pop-up: Pops up the camera image in full screen on spot monitors when pre-set event
occurs.

Sequence Interval: Set time interval between cameras on spot monitors for sequencing.
Select camera display option on spot monitors. Spot outs support full and sequential camera

displays. Press button to set single or multi cameras for sequential display on spot monitors.

28

2-4. RECORD

Under Record menu, Record configuration options for Storage, Record and Record Tools can be
selected.

2-4-1. MENU > RECORD > Storage

In Storage, it displays the installed/connected
storage status such as Capacity, Type, Usage
and Status.
Format: Press Format to format selected HDD.
Record: Displays the recording period and data
stored on HDD.

Detail: Displays the detail information of data
stored on HDD

In S.M.A.R.T, HDD status are being displayed
including its temeprature. Click Update to get
the latest status.

29

2-4-2. MENU > RECORD > Record

In Record, general recording options can be
selected including overwrite, resolution, speed,
recording quality and etc.

Overwrite: Select Overwrite to overwrite
recorded HDD data when it is full.
Audio Record: Select Audio Record to record
audio with video image.

Resolution: Select recording resolution.

Auto Deletion(days): Turn on Auto Deletion to delete any data older than the defined days

automatically.

Time Record: Set ips/quality for continuous recording
Event Record: Set ips/quality for event recording
Emergency Record: Set ips/quality for emergency recording mode.

In Event, pre and post recording options for
Event can be set.

Pre-Event Duration: Video Images occurred
right before an Event can be recorded by
setting Pre-Event under Event Mode. Duration
Pre-Event recording can be set using Pre­Event(sec) up to 30 seconds.

Emergency Record Duration: Time duration can be set for Emergency recording from 5
seconds to 30 minute or continuously by selecting No Limit option.
Event REC Duration: Set recording duration for events up to 30 minutes.

In Schedule, fully detailed and specified recording schedules can be set by day, time, modes,
cameras and recording options.

Press to add a new schedule. To remove an existing schedule, press next to it. Press
Setting to set recording options.
Use Default Setting: Check Use Default Setting to follow main recording setting under Record
menu.

30

2-4-3. MENU > RECORD > Record Tools

In Record Tools, estimated HDD usage and
recording period can be calculated. Press
Calculate once resolutions, ips, number of
cameras and quality are set. The recording
period is calculated based the size of HDD
installed.
The GB size shows the HDD size requires for a
day recording. Day and Hours shows the period
can be recorded based on the installed HDD
size.

Note

: The calculation results show approximate data only. Same frame rate and video quality
does not guarantee same storage size and recording duration. This is due to the variety of
conditions on images such as more/less colors or more/less movements. This situational variance
will affect the file sizes more at lower frame rate settings.

Note

: Changes Ips manually. It does not change Ips according to the change of resolution.

Note

: approximate size for each resolution – CIF: 360X240, Half D1: 720x240, D1: 720x480

In Recording Status, current recording options
and status are displayed.

31

2-5. NETWORK

Under Network menu, Network conf iguration options for network Address, DDNS, Remote
Notification and Transmission can be set up.

2-5-1. MENU > NETWORK > Address

In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be
set for network connections.

Type: Select the type of network configuration from: Static IP, DHCP and ADSL(with PPPoE).

IP Address: Enter IP address using button.

Subnet Mask: Enter Subnet Mask using button.

Gateway: Enter Gateway using button.
DNS: Set up the IP address of the DNS server. If you set up the DNS Server, the domain name of

the DVRNS server instead of the IP address can be used during the DVRNS Server setup.

In Port, Select appropriate port number for external access to the system. The port list shows
necessary ports to be opened for each operation.

Network Port: Set port for DVR Remote Client.
Web Port: Set port for Web Remote Client.
RTSP Port: Set port for Android based devices.
iPhone Port: Set port for iPhone.

Note

: ID and Password are required in ADSL(with PPPoE) type.

Note

: Default Network port is 10101 but it can be set from 1500 to 32000 if it is necessary

After you modify port numbers, DVR will be automatically restarted.

Note

: Router or similar devices users need to open additional TCP ports for network connection,

such as Live, Playback, Setup, Web, RTSP and iPhone.

Note

: ISP’s(Internet Service Provider) DNS address should be inputted for using DDNS.

32

2-5-2. MENU > NETWORK > DDNS

Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or static IP
address. We also provide an update mechanism which makes the hostname work with your
dynamic IP address of DVR
In the DDNS, network options for DDNS can be selected.

Use DDNS : To decide whether using DDNS service or not
Hostname: Create a hostname that points to your dynamic IP or static IP address.
Use ID: To decide whether managing hostname through autoipset.com or not.
ID/Password: autoipset.com‟s ID and Password.

Note

: Use ID/Password registered in DDNS.

Update: Register or update the hostname at autoipset.com

Note

: For more specific information about DDNS and its registration and management at
autoipset.com, please see the appendix.

33

2-5-3. MENU > NETWORK > Notification

In Callback, set up IP addresses of client sites
so that Events detected in local system can be
notified to multi remote client sites
simultaneously. Enter IP addresses of client
sites to receive events notifications on remote

sites. Press to pop up the virtual keyboard.

Callback Interval: Select Callback Interval to
set time interval between consequential events
being sent to remote site.

Port : Set UDP port that transmits DVR‟s event information to Client sites.

Note

: Any events occur between the pre-set interval time will not be sent to remote site. e.g. If
the interval is set as 30 seconds, only the events occur every 30 seconds since the first event will
be sent to remote site.

In Email, Events can be notified to personal email addresses by text message.
E-Mail Interval: Select E-Mail Interval to set time interval between consequential events being
sent to remote site via email.

Recipient: Enter the email address of a recipient. Up to 5 recipients can be entered.

Note

: Any events occur between the pre-set interval time will not be sent to remote site. e.g. If
the interval is set as 30 seconds, only the events occur every 30 seconds since the first event will
be sent to remote site via email.

SMTP Server: Enter SMTP server using the virtual keyboard. SMTP server information can be
obtained from a system administrator.

Sender: Enter the address/name where the email is being sent from.

2-5-4. MENU > NETWORK > Transmission

In Transmission, Network transmission can be
controlled with ips and bandwidth.

Note

: Max. ips on Network transmission is

120ips@16ch-DVR and 60ips@8ch-DVR.(NTSC)

34

2-6. EVENT

Under Event menu, events can be set in synchronization with Sensor, Motion, Video Loss, Text-In,
System,

2-6-1. MENU > EVENT > Sensor

In Sensor, each sensor can be selected for
activation and its type. Select Sensor Type

using button.

NC: Normally Closed
NO: Normally Opened

In Record, each sensor can be synchronized with single and multi cameras. Press to select
cameras to be synchronized with sensors.

In Alarm, each sensor can be synchronized with single and multi alarms. Press to select
alarms to be synchronized with sensors.

In Notification, each sensor can be synchronized with single and multi callback or emailing sites.

Press to enter callback or email address to be synchronized with sensors.

35

PTZ can be sync with Event using its preset function. If Event occurs, PTZ moves to the position
where event and positions are pre set. The above menu shows, Sensor 1 is set to sync to
cameras 2,3,4 and 5. If you click PTZ section, PTZ preset (position) can be set for cameras in the
event of Sensor activation.

PTZ event related preset can be synch only with Sensor/Motion/VideoLoss events. If there are
multi events occur to a camera at same time, it takes events in order of Sensor > Motion >
VideoLoss.

2-6-2. MENU > EVENT > Motion

In Motion, system provides Motion Detection function. Set Motion Detection using Sensitivity,
View and Area options.

Sensitivity: Select motion sensitivity from Very Low to Very High.
View: On or Off the appearance of motion zones on screen when motions is detected.
Area: Define the area for motion detection.

Press Setup under Area to define motions detection areas. The blocks indicate the area where is
defined for motion detection

Select Block: Use arrow keys to move around a box. Select individual blocks to set motion
zones. Use number keys to select and unselect blocks (When using a mouse, use a left button).

Clear Block: Unselect all blocks inside a box
Select All: Select blocks on entire screen.
Clear All: Unselect blocks on entire screen.

36

In Record, each camera can be synchronized
with single and multi motion detections from

other cameras. Press to select cameras to
be synchronized with motions detections.

In Alarm, each camera with motion can be
synchronized with single and multi alarms.

Press to select alarms to be synchronized
with cameras for motion events.

In Notification, each camera with motion can
be synchronized with single and multi callback

or emailing sites. Press to enter callback or
email address to be synchronized with cameras
for motion events.

PTZ can be sync with Motion event using its
preset function. If Motion is detected, PTZ
moves to the position where event and
positions are pre set.

37

2-6-3. MENU > EVENT > Video Loss

In Video Loss, single or multi cameras can be
synchronized for event recording when there is

a video loss. Press to select single or multi
cameras to be synchronized with cameras for
video loss.

In Alarm, each camera with video loss can be
synchronized with single and multi alarms.

Press to select alarms to be synchronized
with cameras for video loss.

In Notification, each camera with video loss can
be synchronized with single and multi callback

or emailing sites. Press to enter callback or
email address to be synchronized with cameras
for video loss.

PTZ can be sync with Video Loss event using its
preset function. If Video Loss occurs, PTZ
moves to the position where event and
positions are pre set.

38

2-6-4. MENU > EVENT > Text-In

The system allows Text In from POS/ATM machines.

Note

: For use of POS/ATM, the system must support general ASCI code.

Text-In Model: Select Text-In model from the list
Transaction Begin: Enter a word which the transaction info to be displayed on screen as a start.
Any Character: Check Any Character to start display a text with any character as a start.
Transaction End: Enter a word of last line where the transaction info to be displayed on screen

as the end. If you want additional lines to be displayed after the transaction end, select more line
options.

Line Delimiter: Enter a symbol or a word to distinguish the end of lines.
Ignore String: Enter a word to ignore strings includes selected word.
Case Sensitive: Select Case Sensitive option if distinguish a word with case sensitivity.

In Record, text event can be synchronized with single or multi camera record.

Press to select camera(s) to be synchronized with text event. If RS232/RS485 Port are being
used at the same time, it has to be used for different cameras. For example, if RS232 is set for
cameras 1~12, RS485 should be set with 13~16. They can‟t share same cameras.

In Alarm, text event can be synchronized with single or multi alarms. Press to select alarms
to be synchronized with text event. If B is selected, system will buzz on alarm detections.

39

In Notification, text event can be synchronized with single and multi callback or emailing sites.

Press to enter callback or email address to be synchronized with text event.

In Text In, each text input can be synchronized with single and multi cameras. Press to select
cameras to be synchronized with text inputs.

40

2-6-5. MENU > EVENT > System

In System, S.M.A.R.T function monitors storage
conditions such as Temperature, Conditions and
Recording. S.M.A.R.T Threshold allows to pre
set tolerable temperature level of storage. If
HDD temperature increases over pre set
temperature, it will notify a user in various ways
according to following settings.

Record Threshold option can be set to notify a message for the indication of HDD storage usage
level. Warning message can be notified in various ways as described below.

In Alarm, each system event can be synchronized with single and multi alarms. Press to
select alarms to be synchronized with each event. If Alert is selected, system will pop up a
warning message on screen.

In Notification, each system events can be synchronized with single and multi callback or

emailing sites. Press to enter callback or email address to be synchronized with system
events.

41

3. Playback

The system provides various playback menus to search recorded data. Please press right mouse
button on mouse or press playback button on the front panel.

Camera : Select camera no.
Layout : Select display mode (8/16 ch. DVR Only)
Go to : Search recorded data by time/date.
Search : Select Calendar Search, Event Search and Text In Search

OSD : Select OSD display option
Text-In Info.: Select Text display option for POS or ATM machines.
Deinterlacing: De Interlacing for D1 resolution
Zoom : Zoom in image by X2
Spot : Select each spot monitors‟ display
Audio : Select Audio outs

Backup : Select backup or Clip Copy option

E. Record : Start Emergency Recording
Log : Select System/Event log
Eject : Open installed ODD
Storage : Select playback storage option
Exit Playback: Exit Search Mode and return to Live Mode

3-1. Go to Time

Select Go to Time to search recorded data by

time/date. Set time/date using button. Go
to Beginning and End options are selectable to
search the very first and last data recorded.
Once desired settings are completed, press OK
to begin playback.
Go to Beginning : Move to the very first
recorded data.
Go to End : Move to the latest recorded data.

42

3-2. Calendar Search

Calendar Search provides easy graphical search by displaying numbers (dates). Dates with
recorded data will be highlighted. Once you select the date, it will display record time table below.
The numbers on the top of the table shows the time frame in 24hours format, and titles on the
left indicate cameras numbers. The color bar shows the full information of recorded data on the
selected date. Move the indicator (line) to select specific recorded time of the selected date. For a
detail display of recorded data please press Detail.

Once desired settings are completed, press Go To to begin playback.

3-3. Event Search

Event Search provides easy search by event list recorded. Select the date and type of event to
find specific data. Press Event: All section on the tope of the list to display event search options.

All: System displays every event
Motion: System displays every events related to Motion
Sensor: System displays every events related to Sensor
Video Loss: System displays every events related to Video Loss
Text-In: System displays every events related to Text In
Emergency: System displays every events related to Emergency Recording

Once find specific list of event, move up and down button to highlight the log and press it to
playback the event data.

43

3-4. Text-In Search

Text In Search provides easy search by transactions. Search for Time and Transaction information.
Press Search for detail information.

Text In Model: Select a model type for Text In
From: Set beginning time to start search or select First for search from the first data.
To: Set end time to end search or select Last for search to the last data.
Search Text: Enter any words to search text data include the words.

Once entering all the search information, press OK to start Text In search.

3-5. Backup Data Playback

Backup files on backup medias can be played on DVR. Insert the media with backup files and
select a file to playback it on DVR.

3-6. Playback Control

R.Play: Reverse Playback
Step Backward: Go to the previous image
Pause: Freeze or Stop current image
Step Forward: Go to the next image
Play: Play the data at normal speed

To control the backward and forward playback speed, press on ◀ or ▶ repeatedly. Playback

speed can increase up to x32.

44

4. Backup

Recorded data can be backed up on USB Flash memory. Select backup or Clip Copy option during
Search or Live mode by selecting Backup.

4-1. Backup

In the BACKUP, the recorded data can be selected for backup to USB devices.

Press USB Device to select the type of USB Device connected to the system.

Select date & time period of data to be backup using button.

Select Camera number to be backup or All to backup all the data recorded during the selected
period. To back up recorded Audio with video data together select Audio.
Status shows capacity of the device being prepared for backup, and it will show backup progress
during backup.

The files saved (backup) in DVDMediaPlayer (.exe) format allows multi camera backup and the
files would not require any specific codec for playback on PC. To open and play a file saved in
DVDMediaPlayer (.exe), double click the file and it will automatically be played on Internet
Explore window. This function is supported only on Internet Explorer 7.0 or above version.

Note

: The backup process could be slowdown if the system is being monitored/playback on the
remote using the client program during the backup process.

45

Note: “DO NOT remove the backup media while the data backup is being processed.
It may cause critical damage to either the media or system if the backup media is
removed during the backup process."

Note

: During the CD or DVD back up the ODD door could be opened and closed as a process of
back up. Please do not remove CD or DVD during the back up in any cases until it is done
completely.

4-2. Instant Backup

Press backup button to start Instant Backup during the playback. Instant Backup window will
appear when press backup button during the normal playback mode. Select Device, File Name,
Audio and press Start to continue the playback and backup. The Backup Icon will appear on the
screen during the Instant Playback. Press backup button one more time to stop and complete
Instant Backup.

Note: “DO NOT remove the back up media while the data backup is being processed.
It may cause critical damage to either the media or system if the backup media is
removed during the backup process."

Note

: Playback speed will be slower than usual while instant back up is processing.

4-3. Clip Maker

Clip Maker allows to create single channel backup file which can be played on PC. Select Clip
Maker option on the pop up menu during the live or pause mode on the playback.

Select the backup option for Clip Maker. Press Start button to create Clip Maker. Use Quick

Time player to play the file created using Clip Maker

Note

: The Clip Maker file can not be played on other programs such as Window Media Player.

46

Chapter 4. Network Monitoring

5. Web Viewer

User can access to use DVR‟s Setup, Live Web Monitoring, Playback functions through Internet
Explorer.

5-1. Login

User can access to the DVR‟s Remote Monitoring System if user inputs DVR‟s IP address or its
registered hostname at Internet Explorer‟s address bar.

Ex) Web port is 80(Default value) – http://hostname.autoipset.com or 211.104.176.143
Ex) Web port is not the default value – http://hostname.autoipset.com:Web port or

211.104.176.143:Web port Ex) http://hostname.autoipset.com:8080 or

211.104.176.143:8080

Port numbers can be checked at DVR MENU > Network > Address > Port

At the DVR‟s login page, User should input correct ID, Password, and Port Number in order to use
Live or Playback function.

 ID : DVR‟s Administrator ID or User ID (Default ID: admin or user)

 Password : DVR‟s Password for administrator or user (Default Password : “1111”)

 Port Number : DVR‟s Port Number (Default Value : 10101)

*If you need more information about Port Number, please check the following

manual section. - “3-5-1. MENU > Network > Address > Port “

 Live : Live Web Monitoring

 Playback : Search and Play the DVR‟s recorded data

5-2. Live

Users can access the Live Web Monitoring and DVR‟s configuration

47

 : One Channel View Mode.

 : Change the display channel at One Channel View Mode.

 : Quad View Mode.

 : Full screen View Mode.

 Setup: Changed the DVR configuration.(Only for administrator)

5-3. Playback

User can search and play the DVR‟s recorded data.

 Playback Icon

: Backward High-Speed Play(X2, 4, 8, 16, 32) : Backward Play

: Forward High-Speed Play(X2, 4, 8, 16, 32) : Forward Play

: Jump to the beginning of data at the selected date : Backward Play by one frame

: Jump to the end of data at the selected date : Forward Play by one frame

: Pause

48

5-3-1. Calendar Search

User can select a specific time to search for the recorded data at the calendar.

As you see the picture, date marked as red color if
there is recorded data on the calendar. In addition,
selected date marked as yellow color.

, : Change month / year

: Search data by inputting specific time.

: Refresh the DVR‟s recorded data information.

5-3-2. EVENT Search

User can search recorded events data through the Event Search function.
Event Search window will be come up if user clicks the Event Search button, then user should
select the date and click ok button. Now, you can select any event that you want to check on the
Event list.

, : Change the Event List pages

: Event Search again with different date

Note

: Web viewer may not display videos properly if user use low performance video cards,
especially on-board type.

49

APPENDIX

A-1. DDNS(Dynamic Domain Name Server)

Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or static IP
address (IP Camera, DVR, and Web Server). We also provide an update mechanism

which makes the hostname work with your dynamic IP address of DVR. You can
use DDNS service after signing up for autoipset.com or without signing up process.

A-1-1. Use DDNS service after signing up for autoipset.com

1. Sign up for autoipset.com

Please run Internet Explorer program, and then please type http://www.autoipset.com at

Internet Explorer‟s address bar. You will see the web page for DDNS service like below.

Please click “Registration” in order to sign up for autoipset.com.

50

Please fill up the blank with correct information, and then click submit button. You should check
the duplication of your user ID by clicking “Check ID” before submission.

2. Log in

Please log in with your ID and Password.
After you log in, you can see the list of your registered DVR like below at the product list.

51

3. DDNS registration

Please select DDNS menu at your DVR with the following route.
DVR > MENU > NETWORK > DDNS

First, please input a hostname that you want to use, and then please select the check box for
Use ID.
Next, please input ID and Password that you registered at autoipset.com, and then please click

“Update” button. Finally, if you see the message, “DDNS: Succeeded in updating”, then all the

registration process is done.

4. DDNS Management

Status

Specification

Elapsed time since last update is Less than 5 minutes

Elapsed time since last update is more than 5 minutes and less than
20 minutes

Elapsed time since last update is more than 20 minutes

No update history

5. Delete the registered DDNS

Please select the DVR DDNS that you want to delete, and then click “Delete” button.

52

A-1-2.Use DDNS without signing up for autoipset.com

Please select DDNS menu at your DVR with the following route.
DVR > MENU > NETWORK > DDNS

Please input a hostname that you want to use, and then please click “Update” button. If you see
the message, “DDNS: Succeeded in updating”, then all the registration process is done.

53

A-2. Compatible HDD Models

3.5" HDD List

NO

PRODUCT

MANUFACTURE

MODEL

CAPACITY

REMARKS

1

Applied Model

SEAGATE

ST3160815AS

160GB

OK

2

Applied Model

SEAGATE

ST3160310CS

160GB

OK

3

Applied Model

SEAGATE

ST3250310CS

250GB

OK

4

Applied Model

SEAGATE

ST3250310NS

250GB

OK

5

Applied Model

SEAGATE

ST3250312CS

250GB

OK

6

Applied Model

SEAGATE

ST3500418AS

500GB

OK

7

Applied Model

SEAGATE

ST3500321CS

500GB

OK

8

Applied Model

SEAGATE

ST3500312CS

500GB

OK

9

Applied Model

SEAGATE

ST3500410SV

500GB

OK

10

Applied Model

SEAGATE

ST31000340SV

1TB

OK

11

Applied Model

SEAGATE

ST31000322CS

1TB

OK

12

Applied Model

SEAGATE

ST31000525SV

1TB

OK

13

Applied Model

SEAGATE

ST31000528AS

1TB

OK

14

Applied Model

SEAGATE

ST31500341AS

1.5TB

OK

15

Applied Model

SEAGATE

ST31500541AS

1.5TB

OK

16

Applied Model

SEAGATE

ST32000542AS

2TB

OK

17

Applied Model

HITACHI

HDS721616PLA380

160GB

OK

18

Applied Model

HITACHI

HCS5C1025CLA382

250GB

OK

19

Applied Model

HITACHI

HDT721025SLA380

250GB

OK

20

Applied Model

HITACHI

HDP725025GLA380

250GB

OK

21

Applied Model

HITACHI

HDS721025CLA382

250GB

OK

22

Applied Model

HITACHI

HDS721032CLA362

320GB

OK

23

Applied Model

HITACHI

HCS5C1050CLA382

500GB

OK

24

Applied Model

HITACHI

HDP725050GLA360

500GB

OK

25

Applied Model

HITACHI

HDS721050CLA362

500GB

OK

26

Applied Model

HITACHI

HCS5C1010CLA382

1TB

OK

27

Applied Model

HITACHI

HDT721010SLA360

1TB

OK

28

Applied Model

HITACHI

HDS721010CLA332

1TB

OK

29

Applied Model

HITACHI

HDS722020ALA330

2TB

OK

30

Applied Model

WD

WD2500AVVS-73L2B0

250GB

OK

31

Applied Model

WD

WD5000AVVS-63M8B0

500GB

OK

32

Applied Model

WD

WD20EADS-00S2B0

2TB

OK

54

COMPLIANCE NOTICE OF FCC:

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS
A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED
TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES,
USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO
RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.

WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER‟S AUTHORITY TO OPERATE THE

EQUIPMENT.
THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product (Applicable in the European Union and other European

countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.

ROHS Compliance