CNB GS3760PF User Manual
Digital Color Camera Series
P/N : 3810-0138B
(Ver.0806E)
Design and specifications are subject to
change without notice.
Color Video Camera Series
OSD
OSD
On-Screen Display
DSP
COLOR VIDEO CAMERA
COLOR VIDEO CAMERA
Color CCD
Color CCD
Digital
DIGITAL CAMERA SERIES
COLOR VIDEO CAMERA
OWNER'S MANUAL
Main Menu -
1) LENS setup
2) DC LENS setup
LENS
①
Press LEFT or RIGHT button in LENS on Main Menu to select the mode to
MANUAL ◀ ▶ VIDEO ◀ ▶ DC ↙.
!
When using DC AUTO IRIS LENS:
Select DC in LENS SETUP under OSD
menu, and place LENS SELECTION
SWITCH at DC in the REAR PANEL
When using VIDEO AUTO IRIS LENS:
Select VIDEO in LENS SETUP under
OSD menu, and place LENS SELECTION
SWITCH at VIDEO in the REAR PANEL
①
Press MENU button in DC ↙ to display the screen on the right side.
②
Use LEFT, RIGHT button to change BRIGHTNESS(IRIS LEVEL) value.
③
Press MENU button to return to the previous screen.
LENS DC
BRIGHTNESS
↙:RETURN
Menu [SHUTTER] -
AUTO Mode Setup
1) SHUTTER setup (for LENS MANUAL)
①
Press LEFT or RIGHT button in SHUTTER
to select the mode to
AUTO ↙ ◀ ▶ FLK ◀ ▶ FIXED
◀ ▶MANUAL ↙.
056
2) AUTO ↙ setup (AE LEVEL setup)
①
Press MENU button in AUTO ↙ to display the
screen on the right side.
②
Use LEFT, RIGHT button to change
BRIGHTNESS(AE LEVEL) value.
③
Press MENU button to return to the previous screen.
↙
SHUTTER AUTO
BRIGHTNESS
↙:RETURN
056
16 17
Menu [FUNCTION] -
MOTION AREA 1
1) MOTION AREA setup
①
Use UP, DOWN, LEFT, RIGHT button
to move AREA setting position.
②
Use MENU button to set and release AREA.
③
Press MENU button for more than 1 second
to move to MOTION AREA MODE
2) MOTION AREA MODE
①
You will return to MOTION AREA MODE
after "Exit" from MOTION AREA MODE.
MOTION AREA
ALL CLEAR
ALL SET
RETURN
EXET
1) MOTION OSD description
①
ALL CLEAR - Release all set AREA
②
ALL SET - Set all 64 MOTION AREA.
③
RETURN - Return to MOTION AREA Setup Mode.
④
EXIT - Save AREA and return to MOTION SETUP MODE.
Menu [FUNCTION] -
MOTION AREA 2
9. SPECIFICATIONS
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
High Resolution Normal ResolutionMODEL
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)
C/CS Mount
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
ON / OFF
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
English / Korean / Chinese 1 / Chinese 2 / Japanese
-10℃~+50℃(Recommendation: -5℃~+40℃)
3332
100VAC - 240VAC Input Model
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
BW / Color / Auto
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris / Manual Lens
100VAC - 240VAC
2.5W (Max)
-20℃~+60℃
4948
. User Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
Explanation of two Symbols
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM.
"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"
2
4
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.
. Contents
Thank you for purchasing this COLOR VIDEO CAMERA.
Before using this camera, please read this operation manual carefully to obtain
the best result and keep this manual for future reference.
1. SAFETY INSTRUCTIONS
2. PRECAUTIONS
3. FEATURES
............................
..................................
4. NAME AND FUNCTIONS
5. OPERATING CAMERA
6. INSTALLATION (LENS)
. Mounting a Lens
. Back-focus Adjustment
7. CONNECTIONS
...........................
...........................
.............
.............
.................
.................
..................
5
6
7
8
11
37
38
39
40
. Connecting to Monitor
. Lens Connector
8. COMPOSITION
9. SPECIFICATIONS
. 12VDC Input Model
. 24VAC/12VDC Input Model
. 100VAC-240VAC Input Model
. 12VDC Input Model
. 24VAC/12VDC Input Model
.
100VAC-240VAC Input Model
...........................
...........................
........................
..................
.........
.........
UTP option
.........
...........
ICR
...........
ICR&UTP
option
...........
ICR
Menu [SHUTTER] -
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
WARNING
The manufacturer could void the user's authority to operate the equipment.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.
1) FIXED ↙ setup (MANUAL,DC,VIDEO LENS)
①
Press MENU button in FIXED
to display the screen on the right side.
②
Press LEFT or RIGHT button in SHUTTER.
Can be set in ([NTSC: 1/60 ~ 1/100,000]
[PAL: 1/50 ~ 1/100,000]) range.
↙
2) MANUAL ↙ setup (MANUAL, DC, VIDEO LENS)
①
In SHUTTER Manual,
press LEFT or RIGHT button.
(SHUTTER M. value is changed between
0<MIN> ~ 255<MAX>.)
0(MIN):1/50 or 1/60, 255(MAX):1/100,000
②
Press MENU button to return
to the previous screen.
This installation should be made by a qualified service person and should abide to all local codes.
3
1. SAFETY INSTRUCTIONS
Read Instructions
Read all of the safety and operating instructions
before using the product.
40
42
43
44
44
46
48
50
52
54
Retain Instructions
Save this instructions for later use.
Cleaning
Unplug this appliance from wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Water and Moisture.
Do not use this product near water or moisture.
(For example. near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool,etc)
Installation
Do not place this product on an unstable cart, stand,
or table. The product may fall causing serious injury
to a child or adult, and damage to the product.
Use only with a cart or stand recommended by the
manufacturer, or sold with the product.
Mounting should follow the manufacturer's instructions,
and should use a mounting accessory recommended
by manufacturer.
Power source
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supplied to
your home, consult your dealer or local power
company.
5
Main Menu -
FUNCTION
1) FUNCTION ↙ setup
①
Press MENU button in FUNTION
to show the OSD display on the right.
2) Select item using UP, DOWN button.
3) Set details using LEFT, RIGHT button.
4) Click "Return" to go to MAIN SETUP
FIXED & MANUAL Mode Setup
SHUTTER FIXED
SHUTTER M : 1/60
↙:RETURN
SHUTTER MANUAL
SHUTTER M.
↙:RETURN
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
000
OFF
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
1) WHITE BALANCE setup
①
In WHITE BAL., press LEFT, RIGHT button
to select the mode you wish to operate
ATW ◀ ▶ AWB ◀ ▶ FIXED
◀ ▶MANUAL ↙.
2) FIXED ↙ setup
①
Can set from MODE 1 to MODE 4.
3) MANUAL ↙ setup
①
As shown on the lower right picture,
set Red and Blue color value temperature.
②
Press MENU button in RETURN
to exit from setup mode.
1) BLC SETUP MODE
①
Press MENU button in BLC ON ↙ ,
to display the screen on the right side.
2) BLC AREA ↙ setup
①
Use UP, DOWN, LEFT, RIGHT button
to move the AREA setup position.
②
Set or release BLC AREA
using MENU button.
③
Press MENU button for more than 1 second
to move to BLC AREA MODE.
Menu [WHITE BAL.] -
↙
WHITE BALANCE Mode Setup
AWB FIXED
AWB FIXED : MODE 1
↙:RETURN
AWB MANUAL
RED
BLUE
↙:RETURN
Menu [FUNCTION] -
BLC SETUP
BLC AREA ↙
BLC RATIO
RETURN
113
255
BLC 1
16
1918
2120
Main Menu -
1) ADJUST setup
2) CONTRAST setup
3) SHARPNESS setup
4) CB_GAIN setup
5) CR_GAIN setup
Main Menu -
1) RESET
36 37
ADJUST
①
Press MENU button in ADJUST.
②
Move to screen on the right side.
!
Each LEVEL value can be
adjusted using LEFT, RIGHT button.
①
Adjust Y-gain value (0~255)
①
Adjust aperture value (0~31)
①
Adjust COLOR CB_GAIN value (0~255)
①
Adjust COLOR CR_GAIN value (0~255)
RESET
①
Select RESET.
Press MENU button.
The screen on the bottom appears.
②
Select YES or NO.
③
Select YES to reset your camera
to default factory condition
ADJUST
CONTRAST
SHARPNESS
CB_GAIN
CB_GAIN
RETURN
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
LOAD DEFAULT
YES
NO
083
12
190
205
OFF
MANUAL
AUTO ↙
ATW
↙
↙
ENGLISH
↙
Main Menu -
1) LANGUAGE setup
①
DEFAULT value - ENGLISH
②
After selecting LANGUAGE,
change setting using LEFT or RIGHT button.
③
Choose the language mode you
wish to operate in.
!
ENGLISH ◀ ▶ Korean ◀ ▶ Chinese1 ◀ ▶Chinese 2 ◀ ▶ Japanese
6. INSTALLATION (LENS)
Please insert a lens cable when using the DC iris lens or Video iris lens.
1
Lens select switch on the rear pannel should be set to DC or VIDEO position
2
when using the AUTO iris lens.
When using the VIDEO type lens, please adjust a brightness of image
3
with volume attached with the lens.
When using the DC type lens, please adjust a brightness of image by
4
setup menu on the rear panel. (see p.16)
- When using DC AUTO IRIS LENS: Select DC in LENS SETUP under OSD
menu, and place LENS SELECTION SWITCH at
DC in the REAR PANEL
- When using VIDEO AUTO IRIS LENS: Select VIDEO
in LENS SETUP under OSD menu, and place
LENS SELECTION SWITCH at VIDEO in the
REAR PANEL
- 100VAC - 240VAC TYPE doesn't provide VIDEO IRIS LENS option
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
LANGUAGE
OFF
MANUAL
AUTO ↙
ATW
↙
↙
ENGLISH
↙
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
3534
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
52 53
9. SPECIFICATIONS
High Resolution Normal ResolutionMODEL
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR)
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)
C/CS Mount
ON / OFF
9. SPECIFICATIONS
High Resolution Normal ResolutionMODEL
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR)
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)
C/CS Mount
ON / OFF
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Input/ Output Connector
Operating Temperature
12VDC Input Model
English / Korean / Chinese 1 / Chinese 2 / Japanese
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
BW / Color / Auto (ICR)
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris / Video Iris / Manual Lens
12VDC (±20%)
140mA / 1.7W (Max)
-10℃~+50℃(Recommendation: -5℃~+40℃)
-20℃~+60℃
24VAC/12VDC
English / Korean / Chinese 1 / Chinese 2 / Japanese
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
ON / OFF (4 Programmable Zone)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris / Video Iris / Manual Lens
24VAC (20V ~ 28V) or 12VDC (10V ~ 15V)
Power / Video / UTP (Option)
-10℃~+50℃(Recommendation: -5℃~+40℃)
Input Model
BW / Color / Auto (ICR)
ON / OFF (Horizontal)
240mA / 2.6W (Max)
ICR & UTP
ICR
5150
option
2. PRECAUTIONS
Handling
Do not disassemble the camera and never touch
parts inside the camera.
Do not drop the camera or subject it to shocks
and vibrations to avoid possible damage.
When attaching or removing the lens, handle
with care in order to that moisture and dust do
not enter the camera.
Installation and storage
Do not point the camera at the sun. This could
damage the camera whether it is operating or not.
Do not install the camera where the temperature
could exceed the allowable range.
Be sure the ambient temperature is less than
40℃ in installation intended for long term
continuous operation.
Avoid installing in a humid or dusty place.
Avoid installing in places where there are
strong magnetic fields and electric signals.
Avoid installing in places where the camera
would be subject to strong vibrations.
Never expose the camera to rain and water.
3. FEATURES
High Sensitivity 1/3 Inch Sony Super HAD CCD
Min. Illumination (F1.2, 30 IRE) : 0.1Lux (Color)
0.05Lux (BW, ICR)
Day & Night (Programmable or ICR)
OSD (On Screen Display)
High Performance Menus For Functions
• Privacy Zone Selectable (4 Programmable Zone)
• Motion Detection Selectable (64 Programmable Zone)
• Sharpness Enhanced Adjustable
• Flickerless Selectable
• Gamma Enhanced Selectable
• BLC Zone Selectable (64 Programmable Zone)
6 7
4. NAME AND FUNCTIONS
C-Mount Lens Adapter
CS-Mount Holding Screw
Used to readjust back focus of the camera.
There are two back focus lock screws.
These must be loosened before the camera
may be back focused.
Loosen the lock screws to turn the CS-mount
lens adaptor, and tighten the lock
screws after adjustment.
Auto Iris Lens Connector
Used to connect Auto Iris Lens plug.
Holder Screw Hole
Used to install the camera on an optional
holder.(Tripod or Bracket)
The optional holder must be equipped with
8 9
the screw specified as shown right.
1/4"- 20 UNC (20 THREAD)
L : 4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
Used to attach C-mount lens.
CS-Mount Lens Adapter
Used to attach CS-mount lens.
L
①
Function
Setup Button
③
Power Input
Terminal
12VDC Input Model
MENU
DC 12V
POWER
VIDEO OUT
Class 2 Only
24VAC / 12VDC Input Model
⑤
VIDEODC
Power Indicate LED
②
Lens Selection
Swicth
④
Video Out Jack
24VAC
12VDC
MENU
POWER
VIDEODC
VIDEO OUT
F.G
Class 2 Only
Menu [FUNCTION] -
1) BLC AREA MODE
①
Exit from BLC AREA MODE
to move to BLC SETUP MODE screen.
2) BLC OSD description
①
ALL CLEAR - Clear all set AREA
②
ALL SET - Set all 64 BLC AREA
③
RETURN - Return to BLC AREA setup mode.
④
EXIT - Save AREA and return to
BLC SETUP MODE.
BLC 2
BLC AREA
ALL CLEAR
ALL SET
RETURN
EXET
1) BLC RATIO setup (BLC LEVEL value setup)
①
Use UP,DOWN button
to move to BLC RATIO.
②
Use LEFT, RIGHT button
to change BLC LEVEL value (0~63)
0:MIN , 63:MAX
③
Press MENU button in RETURN
to move to FUNCTION MODE.
Menu [FUNCTION] -
BLC SETUP
BLC AREA ↙
BLC RATIO
RETURN
BLC 3
16
2322
Menu [FUNCTION] -
1) AGC setup
①
AGC default setting ON
②
Press MENU button in ON
to display the screen on the right side.
③
Use LEFT, RIGHT button
to adjust AGC GAIN value (0~255)
0:MIN , 255:MAX
④
Press MENU button to return
to the previous screen.
AGC
Menu [FUNCTION] -
1) DAY NIGHT setup
↙
↙
AGC CONTROL
AGC GAIN
↙:RETURN
095
①
Move to DAY NIGHT screen on the right side.
②
Change setting using LEFT, RIGHT button.
AUTO ↙ ◀ ▶B/W ↙ ◀ ▶ COLOR.
2) AUTO ↙ mode setup
①
Press MENU button in AUTO ↙ setup mode.
②
Move to screen on the right side.
③
Select item using UP / DOWN button.
④
Adjust value using LEFT / RIGHT button.
⑤
Press MENU in RETURN to return
to the previous screen.
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
DAY NIGHT AUTO
DELAY
START LEVEL
END LEVEL
RETURN
DAY NIGHT 1
OFF
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
01
092
074
24 25
Mounting a Lens
Back-focus Adjustment
When a lens is mounted, adjustment of the back-focus may sometimes be required.
Remove the lens mount cap from the camera.
1
Adjust the lens focus ring when the correct focus cannot be obtained.
WITH A FIXED-FOCUS LENS
Attach or remove the C-mount adapter depending on the lens to be used.
2
- If the adapter is attached so tightly that it is difficult to remove it.
(Keep the C-mount adapter for possible future use.)
Attach the lens to the lens mount. Secure it so that it does not become loose.
3
If the lens has an auto-iris mechanism, connect the lens cable to the lens connector.
4
- When installing a video-iris lens, lens switch should be set to VIDEO position.
1) Fully open the aperture and set the focus ring to "∞"(infinity).
In the case of an auto-iris lens only, shoot a comparatively dark object so that the aperture is fully open.
2)
Loosen the two back-focus screws with a screw driver(
3) After adjusting the back-focus, tighten the back-focus screw.
L-wrench
), and turn the lens mount to focus.
WITH A ZOOM LENS
1) Fully open the aperture and set the lens to the maximum tele-photo position. Then turn the focus ring to focus.
In the case of an auto-iris lens only, shoot a comparatively dark object so that the aperture is fully open.
2) Set the lens to its maximum wide-angle position.
3) Loosen the two back-focus screws with a
4) After adjusting the back-focus, tighten the back-focus screw.
5) Repeat step 1)~3) until the difference between focusing position 1) and 2)becomes smallest.
screw driver(
L-wrench), and turn the lens mount to focus.
- When installing a galvanometric-iris lens, lens switch should be set to DC position.
CAUTION : Do not forcibly turn back-focus screw, it could cause damage to the camera.
38 39
7. CONNECTIONS
For BNC Video Output Model
POWER
To Power input terminal
Power Source
DC 12V
MENU
DC 12V
NOTE
Do not turn any component's power
on until all connections are completed.
• Connect the video output of the camera to the video input of a monitor or other equipment.
When using a "loop through" connection of two or more monitors, set the 75Ω switch of only the final
monitor to on. Determine the type of cable according to the distance of the connected equipment.
VIDEODC
VIDEO OUT
Class 2 Only
To Video input connector
For UTP Video Output Model
POWER
MENU
Camera
24VAC~~UTP OUT
• Connect UTP (Unshielded Twisted Pair) wire to the UTP output of the camera directly.
UTP transmitter is included in the camera therefore additional UTP transmitter is not necessary.
VIDEODC
VIDEO OUT
Class 2 Only
UTP Cable
300m(Max)
• UTP receiver is necessary to connect UTP wire to Monitor or DVR.
• When connecting UTP wire, make sure the polarity of the video signal.
• Use UTP wire "CAT5 24AWG" to have the best transmission quality.
• The twisted-pair output cannot be used at the same time as the composite video output.
• 24VAC only
Connecting to Monitor
Monitor(or DVR)
UTP Receiver
40 41
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
9. SPECIFICATIONS
High Resolution Normal ResolutionMODEL
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR)
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)
C/CS Mount
ON / OFF
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
100VAC - 240VAC Input Model
English / Korean / Chinese 1 / Chinese 2 / Japanese
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
BW / Color / Auto (ICR)
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris / Manual Lens
100VAC - 240VAC
3.0W (Max)
-10℃~+50℃(Recommendation: -5℃~+40℃)
-20℃~+60℃
ICR
54 55
①
Function Setup Button
Functions can be setup using 5 buttons on the camera's rear panel.
MENU Buttons : Used to access menu mode.
Also used to escape menu mode.
UTP Transmission Model
①
Function
Setup Button
⑥
UTP Video
Output Terminal
24VAC~~UTP OUT
MENU
POWER
VIDEO OUT
Class 2 Only
⑤
VIDEODC
Power Indicate LED
②
Lens Selection
Swicth
④
Video Out Jack
10 11
100VAC~240VAC Input Model
POWER
MENU
POWER INLET
VIDEO OUT
③
Power AC IN
MENU
②
Lens Selection Switch
Used to choose DC or VIDEO according to the type of your Lens.
③
POWER Input Terminal
Used to connect a 12VDC power source.
Used to connect an 24VAC or 12VDC power source.
Used to connect an 100VAC~240VAC power source.
④
VIDEO OUT Jack
Used to connect an external video monitor in jack.
⑤
Power Indicate LED
⑥
UTP Video Output Terminal
These terminals provide a composite video output signal which may be transmitted over
a twisted-pair connection to furnished with a suitable receiver.
5. OPERATING CAMERA
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
SETUP MENU
• ON • OFF
• MANUAL • VIDEO • DC
• AUTO • FLK • FIXED • MANUAL
• ATW • AWB • FIXED • MANUAL
• BLC • AGC • DAY NIGHT • PRIVACY
• MIRROR • GAMMA • MOTION
• CONTRAST • SHARPNESS
• CB_GAIN • CR_GAIN
• ENGLISH • KOREAN • CHINESE1 • CHINESE2 • JAPANESE
SETUP
- Press and hold MENU button 1 second to access
the setup mode.
• Select the status using the ◀, ▶, ▲, ▼ button.
• ↙ Press MENU button on OSD to enter sub menu.
MENU
DC 12V
POWER
VIDEODC
VIDEO OUT
Class 2 Only
UP / DOWN Buttons : Used to choose the desired
menu item. It also moves the cursor up or down in
the menu screen.
LEFT/RIGHT Buttons: Used to change the parameter
of the selected menu item. It also moves the cursor
the left of right in the menu screen.
Setting up the Menu
Use five buttons on rear side of the camera.
- DOWN Button
- UP Button
- LEFT Button
- RIGHT Button
- MENU(SET) Button
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
MANUAL
AUTO ↙
ATW
↙
↙
ENGLISH
↙
12 13
Menu [FUNCTION] -
DAY NIGHT 2
1) DAY NIGHT OSD description
①
DELAY
DAY --> NIGHT or NIGHT --> DAY conversion time setup
0 : No DAY NIGHT AUTO conversion
1~63 : Can set from 1 second to 15 seconds
②
START LEVEL
DAY --> NIGHT conversion illumination intensity setup 0~255 (DEFAULT : 4 Lux)
0 : High illumination intensity, 255 : Low illumination intensity
!
Initial value setup is recommended.
③
END LEVEL
NIGHT --> DAY conversion illumination intensity setup 0~255 (DEFAULT : 12 Lux)
0 : High illumination intensity, 255 : Low illumination intensity
!
Initial value setup is recommended.
1) B/W ↙ mode setup
①
Press MENU in B/W ↙ setting
②
Move to screen on the right side.
③
Use LEFT, RIGHT button
to set BURST ON / OFF.
④
After setup, return to the previous screen
by pressing MENU button.
Menu [FUNCTION] -
DAY NIGHT B/W
BURST ON
DAY NIGHT 3
26 27
Menu [FUNCTION] -
PRIVACY
1) PRIVACY setup
①
Default setting OFF - Use LEFT,RIGHT button.
Change setup to ON ↙ mode.
②
After ON ↙ mode setup, 4 AREA groups are
configured as displayed on the right-side picture.
③
Press MENU button.
Details of each area is dsplayed.
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
ON ↙
ON ↙
AUTO ↙
ON ↙
OFF
0.45
OFF
1) MIRROR setup
①
MIRROR default setting OFF
ON setting - Use LEFT, RIGHT button.
②
Left and Right side is switched
as shown on the picture.
Menu [FUNCTION] -
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
2) PRIVACY details setup
①
Select AREA SEL - PRIVACY 0~3.
②
AREA STATE - 0~3 AREA ON/OFF
③
LEFT - Change left por tion of each AREA size.
④
RIGHT - Change right portion of each AREA size.
⑤
TOP - Change top portion of each AREA size.
⑥
BOTTOM - Change bottom portion of each AREA size.
⑦
28 29
COLOR - Change entire color of the AREA (16 COLOR)
PRIVACY
AREA SEL
AREA STATE
LEFT
RIGHT
TOP
BOTTOM
COLOR
RETURN
AREA 0
ON
017
058
020
055
001
OFF ON
MIRROR
OFF
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
Lens Connector
When using an auto-iris lens, install the accessory lens plug
on the lens cable as follows.
Video Type lens : Set lens Switch to Video. Connect the lens cable of a video Type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.
DC type lens : Set lens switch to DC. Connect the lens cable of a DC(Galvanometric) type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.
Pin Assignment :
#
1
#
3
#
2
#
4
NOTE
VIDEO Iris Type Lens
Pin No.
#1
#2
#3
#4
After installing the connector plug, connect it to
the lens connector on the left side of camera.
Signal
+9V DC
Video(1.0Vp-p, high impedance, no sync)
N.C
GND
DC Iris Type Lens
Pin No.
Signal
#1
Damping coil (-)
#2
Damping coil (+)
#3
Drive coil (+)
#4
Drive coil (-)
9. SPECIFICATIONS
High Resolution Normal ResolutionMODEL
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)
C/CS Mount
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
ON / OFF
8. COMPOSITION
. Lens Connector Plug (E-4-191J-100)
. Lens Mount Cap
. C-mount Adapter
. Owner's Manual
......................................................
......................................................
......................................................
The lens mount cap and C-mount adapter are attached when supplied.
!
Design and specifications are subject to change without notice.
This color video camera is designed to output video signals conforming
to the NTSC(PAL) standard. So that it cannot be used with video recorder
or color monitors which use color systems other than NTSC(PAL).
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
English / Korean / Chinese 1 / Chinese 2 / Japanese
ON / OFF (4 Programmable Zone)
ON / OFF (64 Programmable Zone)
DC Iris / Video Iris / Manual Lens
-10℃~+50℃(Recommendation: -5℃~+40℃)
............................
12VDC Input Model
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
BW / Color / Auto
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
12VDC (±20%)
100mA / 1.3W (Max)
-20℃~+60℃
1
1
1
1
4342
4544
Main Menu -
SETUP
Main Menu -
CAMERA ID
1) CAMERA ID setup (default setting OFF)
1. Press MENU button, then SETUP mode is activated.
• MAIN SETUP menu is displayed on the monitor.
2. Select OSD item using UP, DOWN button.
3. Set details using LEFT, RIGHT button.
4. Select "Exit" and then press the MENU button
to finish the SETUP (Save and Exit)
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
MANUAL
AUTO ↙
ATW
↙
↙
ENGLISH
↙
①
Press MENU key in ON
(Access ID setting MODE)
②
Press MENU key in CAMERA ID.
③
Character is changed each time UP, DOWN is
pressed. (Can select up to 63 letters)
④
Press MENU button in ↙ to
exit from ID setup mode
⑤
Press MENU button in 'C' to correct and erase
the chosen entry.
2) POSITION setup. Press POSITION ↙.
①
Move the character using UP, DOWN, LEFT, RIGHT button.
②
Press Menu button to confirm selection of the character.
③
Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.
↙
state.
ID SETUP
CAMERA ID
A ↙
_
POSITION
RETURN
C
14 15
Menu [FUNCTION] -
GAMMA
1) GAMMA setup (DEFAULT 0.45)
①
In FUNCTION MODE,
use UP, DOWN button to select GAMMA.
②
Use LEFT, RIGHT button
to adjust GAMMA value.
(USER ◀ ▶ 0.05 ◀ ▶ 0.10 ◀ ▶ 0.15 ~ 1.0)
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
OFF
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
1) MOTION DETECTION setup
①
DEFAULT value OFF
②
In ON ↙ , press MENU button.
③
Display MOTION details.
2) AREA ↙ setup
①
In AREA ↙ , press MENU button. (see p.32)
3) MOTION TH. Setup
①
Set motion sensitivity 0(MAX)~255(MIN)
4) MOTION TRACE setup
①
ON : Display motion detection AREA.
!
Setting value can be adjusted
using LEFT or RIGHT button.
Menu [FUNCTION] -
FUNCTION
BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
MOTION
AREA ↙
MOTION TH.
MOTION TRACE
RETURN
MOTION
OFF
ON ↙
AUTO ↙
OFF
OFF
0.45
OFF
037
OFF
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Lens
Camera ID
9. SPECIFICATIONS
High Resolution Normal ResolutionMODEL
NTSC PAL NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines 380 TV Lines
0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)
C/CS Mount
Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /
FLK / Fixed / Manual (Level Adjustable)
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
Manual / DC (Level Adjustable) / VIDEO
ON / OFF
Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Input/ Output Connector
Operating Temperature
24VAC / 12VDC Input Model
English / Korean / Chinese 1 / Chinese 2 / Japanese
ON / OFF (Level Adjustable)
ON / OFF (Level Adjustable)
BW / Color / Auto
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris / Video Iris / Manual Lens
24VAC (20V ~ 28V) or 12VDC (10V ~ 15V)
140mA / 1.6W (Max)
Power / Video / UTP (Option)
-10℃~+50℃(Recommendation:-5℃~+40℃)
3130
UTP option
4746
Loading...