CNB G2315PF User Manual

Digital Color Camera Series

P/N : 3810-0023V (Ver.0607E)

Design and specifications are subject to change without notice.

Color Video Camera Series

High Resolution Camera

Color CCD

Digital

•

DIGITAL CAMERA SERIES

COLOR VIDEO CAMERA

OWNER'S MANUAL

4. Features

1. High Resolution

The horizontal resolution of 550 TV lines can be achieved by using a high density CCD having effective 410K pixels, which provides clean, noiseless and reliable pictures.

2. Day & Night

The camera provides automatic mode changeover by sensing day or night conditions. It can change color mode in the day condition for optimal color and BW mode in night condition for clear identification.

2. High Sensitivity

SONY DSP technology provides best picture with min Illumination of

0.1Lux(Night), 0.3Lux(Day).

3. Backlight Compensation

The backlight compensation technology allows the camera to find the best picture conditions in any environment and automatically gives a necessary light level compensation.

4. Auto White Balance

AWB function allows the camera to adjust the white balance automatically in response to light conditions.

5. VIDEO/ DC/ MANUAL Lens Selectable

The camera accepts 3 types of lenses (VIDEO/ DC/ MANUAL) and is set with the VIDEO/ ELC/ DC selection switch.

6. Electronic Iris

Electronic iris shutter is automatically controlled at the speed of 1/60~100,000sec (NTSC models), 1/50~100,000sec (PAL models).

5. Name and Function

DJU

LEN

Focal Length Adjustment

Use this screw to adjust the focal length.

Tripod Mounting Hole

Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below.

C-Mount Lens Adapter

Used to attach C-mount lens.

Auto Iris Lens Connector

Used to connect Auto Iris Lens plug.

1/4"- 20 UNC (20 THREAD)

L : 4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

Connecting to Power

Each model has different power specification, please check the name of the model and power specification before connecting to power source. Please refer to the sticker identifying the model, which is attached on the product, for power specification.

For DC12V Power Type Only

. The wire is polarized. Be careful of polarity. . Use DC 12V power source.

#22

)]

㎟

Class 2 Only

)

(

0.52

DC 12V

#20

㎟

0.030

0.011

#18

(

)

0.83

㎟

0.018

0.006

ELC

DCVIDEO

D / N

BLC

OFFFLON

DC LEVEL

ONOFF OFF

DC 12V

VIDEO OUT

Class 2 Only

Resistance of copper wire [at 20℃ (68˚F

)

#24

(

)

(

0.22

㎟

0.078 0.050

0.028 0.018

0.33

Copper wire size

(

AWG)

Resistance(Ω

Voltage Drop(V/m

. Voltage drop may be experienced by the camera as per length of the power cable according to the table above. The camera may malfunction of the length of the output line between the camera and the adaptor is too long.

* Voltage for camera operation: DC 12V ± 10% * Voltage drops on above table are variable according to types of electric cord and makers.

For AC24V / DC12V Power Type

. The wire is non-polarized. . Use AC 24V power source or DC 12V power source.

D / N OFFFLON

ONOFF OFF

AC 24V / DC 12V F.G

Class 2 Only

ELC

DCVIDEO

BLC ON

V.PHASE

LEVEL

VIDEO OUT

AC24V/DC12V

F.G

Class 2 Only

Notes

. Be sure to connect power after all the installation is done. . Note that AC adaptor is not supplied with camera. . Use only AC 24V/DC12V UL listed class 2 power supply. . Do not use power sources other than that specified.

)

For AC100V~AC240V Power Type [High & Normal]

ELC

DCVIDEO

D / N

BLC

OFFFLON

ONOFF OFF

POWER INLET

DC LEVEL

VIDEO OUT

Cabel

- Brown

- Blue

- Green

AC Power Input

Frame Ground

. User Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION!

Explanation of two Symbols

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance-(servicing) instructions in the

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should abide to all local codes.

COLOR VIDEO CAMERA

DC 12V Input Model

① Function Selection

DC 12V

⑤ Power Input Terminal

Class 2 Only

AC 24V/DC 12V Input Model

① Function Selection

AC 24V / DC 12V F.G

⑤ Power Input Terminal

Class 2 Only

AC 100V~AC 240V Input Model

① Function Selection

⑤ Power AC IN

POWER INLET

D / N OFFFLON

ONOFF OFF

D / N OFFFLON

ONOFF OFF

D / N OFFFLON

ONOFF OFF

COLOR VIDEO CAMERA

①

Function Selection Switch

FL (Flickerless)

If the camera is used with 50Hz fluorescent lighting, there maybe flicker on the screen. In this case, FL switch should be set to ON position. But, FL switch should be set to OFF position if 60Hz power source is used.

D/N (Day & Night)

It selects D/N on, off function. It senses day and night according to AGC level.

BLC (Back Light Compensation)

This feature would be useful when camera is facing an object that has excessive light behind it. BLC prevents the center of object from too much darkness. E.g.: Video camera in the store facing the entrance doors.

②

Lens Selection Switch

Used to choose DC or VIDEO or ELC according to the type of your Lens.

③

V.PHASE Adjustment V.R (AC 24V / DC 12V Input Model)

If the camera is to be used in LineLock mode, the vertical phase may require adjustment to synchronize the vertical phase of the camera with other camera in the system. Make this adjustment when the vertical phase of the camera does not match with other cameras or systems. For correct adjustment, use a multi-channel oscilloscope. The V.PHASE adjustment can be readjusted.

④

DC LEVEL Adjustment V.R Used to adjust video output level of DC driven auto iris lens. When the brightness control of the monitor does not operate correctly.

⑤

POWER Input Terminal Used to connect an AC 24V or DC 12V power source. Used to connect a DC 12V power source. Used to connect an AC 100V~AC 240V power source.

⑥

VIDEO OUT Jack: Use for installation and service.

FLOND/N

OFF ON OFF

FLOND/N

OFF ON OFF

FLOND/N

OFF ON OFF

DCVIDEO

② Lens Selection Swicth

④ DC LEVEL Adjustment V.R

ELC

BLC

DC LEVEL

⑥ Video Out Jack

VIDEO OUT

② Lens Selection

V.PHASE

DCVIDEO

Swicth ③ V.PHASE

Adjustment V.R

Left( ):Internal Right( ):

External

④ DC LEVEL Adjustment V.R

⑥ Video Out Jack

② Lens Selection

Swicth

④ DC LEVEL Adjustment V.R

ELC

BLC

LEVEL

VIDEO OUT

ELC

BLC

DC LEVEL

⑥ Video Out Jack

VIDEO OUT

BLC

OFF

BLC

OFF

BLC

OFF

COLOR VIDEO CAMERA

Connecting to Monitor

For BNC Video Output Model

Connect the VIDEO out jack to the monitor video in jack.

Camera

ELC

DCVIDEO

D / N

BLC

OFFFLON

V.PHASE

LEVEL

ONOFF OFF

AC 24V / DC 12V F.G

VIDEO OUT

Class 2 Only

As the connecting method varies with the instruments, refer to the manual supplied with the instrument.

Connect the cable after power is turned off.

Set the 75Ω/ Hi-Z selection switch as shown below if you have an intermediate device.

CCD Camera

D / N

BLC

OFFFLON

ONOFF OFF

AC 24V / DC 12V F.G

Class 2 Only

LEVEL

VIDEO OUT

ELC

DCVIDEO

V.PHASE

Intermediate

Video Receiver

Monitor

End monitor

COLOR VIDEO CAMERA

7. Specifications -DC 12V Input Model

High ResolutionModel

Signal System

CCD Pick-up Element

Effective Pixels

Video Output

Sync. System

Luminance S/N Ratio

Resolution

Sensitivity

Lens Mount

Electronic Shutter

White Balance

Auto Gain Control

Back Light Compensation

Day & Night

Flickerless

Applicable Lens

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Dimensions (WxHxD)

Weight

NTSC PAL

2:1 Interalce Transfer 1/3 Inch SUPER HAD CCD

768(H) x 494(V) 752(H) x 582(V)

Composite: 1.0V p-p, 75Ω, Unbalanced

Internal Sync

More than 48dB (AGC OFF)

550 TV lines

0.3Lux (F1.4, 30IRE, AGC ON), 0.1Lux(Night Mode)

C / CS Mount

1/60 ~ 1/100,000 Sec. 1/50 ~ 1/100,000 Sec.

On / Off Selectable (20dB)

On / Off Selectable

DC Iris / Video Iris / Manual Lens

DC 12V (10V~15V)

150mA, 2W (Max)

-10℃~+50℃(Recommendation : -5℃~+40℃)

-20℃~+60℃

64 x 57.6 x 124.6mm

Approx. 430g

AWB

COLOR VIDEO CAMERA

Model Description

Precautions

Composition

Features

Name and Function

Connection

Specifications

Troubleshooting

COLOR VIDEO CAMERA

1. Model Description

Thank you for purchasing this COLOR VIDEO CAMERA.

Before operating the camera, confirm that you have the right camera model and proper power voltage. In order to help you understand this manual, we'll introduce our model's description.

Signal System

NTSC

PAL

NTSC

PAL

NTSC

PAL

NTSC

PAL

NTSC

PAL

NTSC

PAL

Power Input

DC 12V

AC 24V / DC 12V

AC 100V~AC 240V

DC 12V

AC 24V / DC 12V

AC 100V~AC 240V

D&N(ICR)

COLOR VIDEO CAMERA

6. Connection. Contents

LENS

The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens.

Notes

. If the lens is marked with fingerprints or other marks, the image quality might be poor.

. It is recommended to use a high quality lens to improve the image quality under low illumination.

. Use auto iris lens with DC type only.

Installing Auto Iris Lens

1. Peel approximately 8mm from the end of the lens cable outer cover.

2. Peel approximately 2mm from the end of the cable inner cover.

COLOR VIDEO CAMERA

3. Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below.

Pin.No. VIDEO TYPE

RED (Power Source)

No. 3 Pin

No. 1 Pin

4. Remove the protective cap, and attach the lens to the camera by turning clockwise.

5. Connect the lens plug to the auto iris connector on the right side of the camera.

6. Set the DC/ VIDEO/ ELC selection switch to DC or VIDEO or ELC according to the type of the lens.

N.C

WHITE (Video signal)

BLACK (GND)

No. 4 Pin

No. 2 Pin

connector

AC 24V / DC 12V F.G

--- Damping

--- Damping +

Lens cable

D / N

BLC

OFFFLON

ONOFF OFF

Class 2 Only

DC TYPE

--- Drive +

--- Drive

ELC

DCVIDEO

V.PHASE

LEVEL

VIDEO OUT

COLOR VIDEO CAMERA

Signal System

CCD Pick-up Element

Effective Pixels

Video Output

Sync. System

Luminance S/N Ratio

Resolution

Sensitivity

Lens Mount

Electronic Shutter

White Balance

Auto Gain Control

Back Light Compensation

Day & Night

Flickerless

Applicable Lens

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Dimensions (WxHxD)

Weight

7. Specifications

NTSC PAL

2:1 Interalce Transfer 1/3 Inch SUPER HAD CCD

768(H) x 494(V) 752(H) x 582(V)

Composite: 1.0V p-p, 75Ω, Unbalanced

0.3Lux (F1.4, 30IRE, AGC ON), 0.1Lux(Night Mode)

1/60 ~ 1/100,000 Sec. 1/50 ~ 1/100,000 Sec.

DC Iris / Video Iris / Manual Lens

AC 24V (20V~28V) or DC 12V (10V~15V)

-10℃~+50℃(Recommendation : -5℃~+40℃)

-AC 24V/DC 12V Input Model

High ResolutionModel

Internal Sync

More than 48dB (AGC OFF)

550 TV lines

C / CS Mount

AWB

On / Off Selectable (20dB)

On / Off Selectable

2.8W (Max)

-20℃~+60℃

64 x 57.6 x 124.6mm

Approx. 430g

7. Specifications

Signal System

CCD Pick-up Element

Effective Pixels

Video Output

Sync. System

Luminance S/N Ratio

Resolution

Sensitivity

Lens Mount

Electronic Shutter

White Balance

Auto Gain Control

Back Light Compensation

Day & Night

Flickerless

Applicable Lens

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Dimensions (WxHxD)

Weight

COLOR VIDEO CAMERA

-AC 100V~AC 240V Input Model

High ResolutionModel

NTSC PAL

2:1 Interalce Transfer 1/3 Inch SUPER HAD CCD

768(H) x 494(V) 752(H) x 582(V)

Composite: 1.0V p-p, 75Ω, Unbalanced

Internal Sync

More than 48dB (AGC OFF)

550 TV lines

0.3Lux (F1.4, 30IRE, AGC ON), 0.1Lux(Night Mode)

C / CS Mount

1/60 ~ 1/100,000 Sec. 1/50 ~ 1/100,000 Sec.

AWB

On / Off Selectable (20dB)

On / Off Selectable

DC Iris / Video Iris / Manual Lens

AC 100V~AC 240V

3W (Max)

-10℃~+50℃(Recommendation : -5℃~+40℃)

-20℃~+60℃

64 x 57.6 x 124.6mm

Approx. 430g

COLOR VIDEO CAMERA

2. Precautions

Do not install the camera in extreme temperature conditions.

Do use the camera under conditions where temperatures are within

-10°C to 50°C. Especially be careful for ventilation under high temperature.

Do not install or use the camera in an environment where the humidity is high.

It can cause the image quality to be poor.

Do not install the camera under unstable lighting conditions.

Severe lighting change or flicker can cause the camera to work improperly.

Never use the camera close to a gas or oil leak.

It can cause malfunctions to occur.

Do not disassemble the camera.

There are no user-serviceable parts inside it.

Do not drop the camera or subject them to physical shocks.

It can cause malfunctions to occur.

Never keep the camera face to strong light directly.

It can damage CCD.

Do not expose the camera to rain or spill beverage on it.

If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components.

Note When this camera is installed near wireless communication devices that emits strong electromagnetic field, irregularity such as noise on the monitor may appear.

COLOR VIDEO CAMERA

3. Composition

1. Color Video Camera ...................

2. Auto Iris Lens Plug .....................

3. C-Mount Adapter ........................

4. Owner's Manual .....................

COLOR VIDEO CAMERA

Installing C/CS-Mount Lens

Before mounting a lens, please check whether it is a C-mount or CS-mount lens.

COLOR VIDEO CAMERA

Mounting a C-Mount Lens

1. Attach the C-Mount lens adapter by turning clockwise.

The back focus is set for the CS-mount lens at the factory.

Mounting a CS-Mount Lens

After removing the protecting cap, attach the lens into the camera

by turning clockwise.

ADJ

COLOR VIDEO CAMERA

8. Troubleshooting

If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician.

Problem Solutions

Nothing appears on the screen.

• Check that the power cord and line connection between the camera and monitor are fixed properly.

• Check that you have properly connected VIDEO

. Memo

COLOR VIDEO CAMERA

cable to the camera VIDEO output jack.

ADJ

The image on the screen is dim.

• Is lens stained with dirt? Clean your lens with soft, clean cloth.

• Set the monitor to proper condition.

• If the camera is exposed to too strong light, change the camera position.

Notes

. Use the lens under the specification as shown. Otherwise the lens can damage the camera or abnormal fixing may result.

2. Attach the lens to the camera by turning clockwise.

The image on the screen is dark.

• Adjust the lens' focus properly.

• Adjust the contrast feature of the monitor.

• If you have an intermediate device, set the 75Ω/ Hi-z properly. (refer to page 18)

•

Adjust DC Level, VR Level properly. (refer to page 10, 11)

ADJ

AMER

i t

. A heavy lens may disturb the balance with the camera and possibly result in damage. Don't use a lens heavier than 450g.

It is recommended to set the lens ALC mode to Av mode(Average).

Pk mode can be occurred hunting.

C-mount lens : 10 mm or less CS-mount lens : 5 mm or less

The camera is not working properly, and the surface of the camera is hot.

The image on the screen flickers.

• Check that you have properly connected the camera to an appropriate power source. (refer to page 16-17)

• Is the camera facing to direct sunlight or fluoresent lighting? Change the camera position.

Color Video Camera Series

COLOR VIDEO CAMERA

CNB G2315PF User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual