CNB BM4267PL User Manual

Digital Slow Shutter

Digital Zoom Camera Series

P/N : 3810-0102B
(Ver.0703E)

Design and specifications
are subject to
change without notice.

Color Zoom Camera Series

DSS

DSS

Weatherproof

Weatherproof

Day & Night Color Camera

Day & Night Color Camera

)

l

a

t

i

g

i

D

x

0

1

/

l

a

c

i

t

p

O

x

2

2

(

m

o
o

Z

x
0

2

2

.

x

a

M

n

o

i

t

c

n

u

F

g

n

i

m

o

•

P

o

w

e

r

f

u

l

Z

o

220

COLOR ZOOM CAMERA SERIES

with DAY & NIGHT

OWNER'S MANUAL

OSD

OSD

On-Screen Display

x Zoom

4. Name and Function of Each Parts 7. On-Screen Display

③① ⑩⑨② ⑤

⑥⑧④⑦ ⑧

①

Fixing Bolt for Sunvisor:

You can unfasten the bolt in order to fix mounting bracket above.

②

Photo Sensor

③

Sunvisor:

To reduce direct sunlight and protect the camera unit from rain
or snow in outdoor.

④

Front Body

⑤

Rear Body

⑥

Mounting Bracket Fixing Bolt:

Fix the camera main body to
bracket by wrench bolt.

⑦

Base Adapter

⑧

Base Adapter Fixing Bolt

⑨

Wall Mount Bracket

⑩

Bracket Supporter

8

Weatherproof Zoom

. Rear Body

③ ②① ③

④

②

VIDEO

NEAR FAR

①

MENU Button

TELE

MENU

WIDE

Used to access OSD menu mode or escape menu from mode.

②

TELE/WIDE Buttons

Used to choose the desired menu item.
It also moves the cursor up or down in the menu screen.

③

NEAR/FAR Buttons

Used to change the parameter of the selected menu item.
It also moves the cursor the left of right in the menu screen.

④

Service Connector

(Extra Video Out Connector)

This camera system includes a service connector that outputs
extra camera video signal. Use it at the installation site to set up
the field of view and focus the camera.

COLOR VIDEO CAMERA

9

Explanation of the On-Screen Display

The OSD (On Screen Display) is as follows:

1 2 3 4 5 6

1. Focus

The appear during the focus manual
mode.

2. Mirror

When IMAGE MIRROR is ON state. The

image is displayed in the opposite direction.

The appear during the mirror mode.

3. Back light Display

In case the excessive light is behind the
center object, it is necessary to prevent
the center object from too much
darkness. Turn the BACK LIGHT ON,
then the center object is not influenced
by the back light.

16

Weatherproof Zoom

X10000 ID 255

WAIT

7

4. WBC(White Balance Control) Display

See Page 17.

5. Shutter Speed

Use to select the shutter speed.

6. Camera ID Display

See Page 17.

7. Wait Mode

Indicates the camera stand-by mode
until the camera power turns on.

8. Example of Zoom, Brightness,

Sharpness Display
See Page 17.

X132

8

FUNCTION OSD Format DESCRIPTION

1

Focus Mode

Non display

Automatic focus mode

Manual focus mode

2

Mirror Mode

Non display

No screen inverted

Screen is inverted to the left or right

Back Light

3

Non display

Back Light compensation off

Back Light compensation mode

4

5

6

7

8

8.1

8.2

WBC Mode

Shutter
Speed

Camera ID

Wait Mode

Zoom
Display

Sharpness
Adjustment
Mode Display

Brightness
Adjustment
Mode Display

Non display

Non display
1 / 125

1 / 10000

After input the identification number to each camera,
Multi-point control is available. (000~255)

Wait

White Balance AUTO

Push Auto White Balance: In this mode
"Menu key" pressed, the white point traced
automatically (PWB Auto Mode), "Menu Key"
released, the white point preserved currently
(PWB Manual Mode).

Normal shutter (NTSC:1/60 PAL:1/50)
8 variable.

Indicates the camera stand-by mode.
until the camera power turns ON.

x22 :

Optical Zoom only mode

x44 :

Digital Zoom x 2 mode

x220 :

Digital Zoom x 10 mode

SHP

COLOR VIDEO CAMERA

x10

x18

17

. User Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION!

Explanation of two Symbols

enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE
ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE"

2

Weatherproof Zoom

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
"dangerous voltage" within the product's

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance-(servicing) instructions in the

INFORMATION

This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the
equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.

This installation should be made by a qualified service person
and should abide to all local codes.

COLOR VIDEO CAMERA

5. Installation

Connecting to Monitor

Cable the VIDEO out to the monitor video in jack.

Weatherproof
IR LED Camera

Monitor

• As the connecting method varies with the instruments, refer to the
manual supplied with the instrument.

• Connect the cable after power is turned off.

• Set the 75Ω/ Hi-Z selection switch as shown below if you have an
intermediate device.

Intermediate

Video Receiver

Weatherproof

IR LED Camera

3

Weatherproof Zoom

Black

#

3

Yellow

#

4

End monitor

Connecting to Power Supply

. AC 24V / DC 12V Power

- The wire is non-polarized.

- Use AC 24V power source or DC 12V power source.

#

1

#

2

#

3

#

4

#

5

#

6

Line ColorNo. Function

#1 RED DC12V/AC24V(H)

ORANGE GND/AC24V(N)

#2

#3 BLACK GND(VIDEO

#4

YELLOW VIDEO OUT

#5

GREEN RS-485 (+)

#6

BROWN RS-485 (-)

)

1110

8. Menu Format 9. Menu Format Table

NO

NAME FUNCTION

1 BACKLIGHT

Move up and down
using the TELE/
WIDE button.

18

TELE / WIDE

Weatherproof Zoom

/

MENU

1 BACKLIGHT

2 SLOW SHUTTER

3 DAY / NIGHT

4 WB CONTROL

5 SHUTTER

6 CAMERA

MENU

7 ZOOM START
8 ZOOM STOP
9 BRIGHTNESS
10 SHARPNESS
11 FOCUS
12 PROTOCOL
13 INIT SET
END

OFF

FLD24

OFF

AUTO

1/10000

123

1
220
48
10
AUTO
DEF
ON

Can be changed
using the /
button.

2

SLOW SHUTTER

3

DAY & NIGHT

4 WB CONTROL

5 SHUTTER

6 CAMERA ID

7 ZOOM START

8 ZOOM STOP

9 BRIGHTNESS

10 SHARPNESS

11 FOCUS

12 PROTOCOL

13 INIT SET

Use to select BLC mode.
OFFㅡㅡ>ON

Use under very low light condition for full color
surveillance.

OFFㅡㅡ>FLD2ㅡㅡ>

Use under low light condition for continuous
surveillance.

Autoㅡㅡ>ONㅡㅡ>OFF

. AUTO : Maintain best color condition by controlling

the change of color automatically.
WB Range 2800˚K ~ 8000˚K

.

PUSH AUTO(PWB) :
in case precise WB maintenance
is needed under any environment.

--Turn the AUTO mode, WB acts automatically.

--Turn the PUSH AUTO mode, WB doesn't act.

Use to select the shutter speed 8 steps.
NORMAL(NTSC:1/60, PAL:1/50),1/125,1/250,---,1/10000

To connect a large number of camera, identification
number can be assigned to each camera control easily.
(OFF, 1-255 : total number of ID is 256)

CAUTION : Set the ID number of camera, then
the ID number is displayed continuously.

>FLD128

ㅡㅡㅡ

Can find White Balance exactly

Use to change the zoom start position.

Use to change the zoom stop position.

Use to change the brightness of scene (0~48).

Use to change the contour of scene (0~15).

. AUTO : Set the focus mode to Auto mode.
. PUSH AUTO : Set the focus mode to Push Auto mode.

. DEF : Default
. P / D : Pelco-D

Set the initial mode ON, the changed data are renewed.
Reset the data to its shipping condition.

COLOR VIDEO CAMERA

19

Thank you for purchasing this COLOR VIDEO CAMERA.

Before operating the camera, confirm that you have the right
camera model and proper power voltage.
In order to help you understand this manual, we'll introduce
our model's description.

Precautions

1.

Composition

2.

Features

3.

Name and Function of Each Parts

4.

Installation

5.

Remote Controller Operation

6.

On-Screen Display

7.

Menu Format

8.

Menu Format Table

9.

Communication Protocol

10.

Troubleshooting

11.

Specifications

12.

4

Weatherproof Zoom

1. Precautions

Camera Installation Camera Installation

Assembling the sunvisor and the bracket. Assembling the bracket supporter

Do not install the camera in extreme temperature conditions.

Do use the camera under conditions where temperatures are within

-10°C to 45°C. Especially be careful for ventilation under high temperature.

Hex Scoket Bolt

(1EA)

(with heater : -30°C ~ 45°C)

Do not install or use the camera in an environment where the
humidity is high.

It can cause the image quality to be poor.

5

6

7

8

10

14

16

18

19

20

21

22

Do not install the camera under unstable lighting conditions.

Severe lighting change or flicker can cause the camera to work improperly.

Never use the camera close to a gas or oil leak.

It can cause malfunctions to occur.

Do not disassemble the camera.

There are no user-serviceable parts inside it.

Do not drop the camera or subject them to physical shocks.

It can cause malfunctions to occur.

Never keep the camera face to strong light directly.

It can damage CCD.

Note
When this camera is installed near wireless communication
devices that emits strong electromagnetic field, irregularity
such as noise on the monitor may appear.

COLOR VIDEO CAMERA

Base Adapter
Fixing Bolt

(4EA)

Mounting Bracket
Fixing Bolt

(1EA)

5

12

Weatherproof Zoom

COLOR VIDEO CAMERA

13

10. Communication Protocol

PELCO "D" Byte Format
Command Message

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

BYTE 1

MSG

0xFF

Pelco Keyboard (95+ PATTERN)

BYTE 1

MSG

0xFF

V/D Keyboard (Set Preset + 98)

BYTE 1

MSG

0xFF

20

Weatherproof Zoom

-RS-485,2400bps,1 Start bit,8 data bits,1 stop bit,no parity

BYTE 2

BYTE 3

CamID

0x00

BYTE 2

BYTE 3

CamID

0x00

BYTE 2

BYTE 3

CamID

0x01

BYTE 2

BYTE 3

CamID

0x00

BYTE 2

BYTE 3

CamID

0x40

BYTE 2

BYTE 3

CamID

0x88

BYTE 2

BYTE 3

CamID

0x08

BYTE 2

BYTE 3

CamID

0x00

BYTE 2

BYTE 3

CamID

0x00

BYTE 2

BYTE 3

CamID

0x00

Zoom TeleFunction

BYTE 4

BYTE 5

BYTE 6

0x20

0x00

0x00

BYTE 7

Checksum

Zoom WideFunction

BYTE 4

BYTE 5

BYTE 6

0x40

0x00

0x00

BYTE 7

Checksum

Focus NearFunction

BYTE 4

BYTE 5

BYTE 6

0x00

0x00

Focus FarFunction

BYTE 4

BYTE 5

0x80

BYTE 4

0x00

0x00

BYTE 5

0x00

Menu On / OffFunction

0x00

BYTE 6

0x00

BYTE 6

0x00

BYTE 7

Checksum

BYTE 7

Checksum

BYTE 7

Checksum

Power OnFunction

BYTE 4

BYTE 5

BYTE 6

Power OffFunction

0x00

BYTE 4

0x00

0x00

BYTE 5

0x00

0x00

BYTE 6

0x00

BYTE 7

Checksum

BYTE 7

Checksum

Pelco D StopFunction

BYTE 4

BYTE 5 BYTE 6 BYTE 7

0x00

Don't care

Checksum

Menu On / OffFunction

BYTE 4

BYTE 5

BYTE 6

0x23

0x00

0x5F

BYTE 7

Checksum

Menu On / OffFunction

BYTE 4

BYTE 5

BYTE 6

0x03

0x00

0x62

BYTE 7

Checksum

11. Troubleshooting. Contents

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.

Problem Solutions

Nothing appears on
the screen.

The image on the
screen is dim.

The image on the
screen is dark.

The camera is not
working properly,
and the surface of
the camera is hot.

The image on the
screen flickers.

• Check that the power cord and line connection
between the camera and monitor are fixed properly.

• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.

• Is lens stained with dirt? Clean your lens with soft,
clean cloth.

• Set the monitor to proper condition.

• If the camera is exposed to too strong light, change
the camera position.

• Adjust the lens focus properly.

• Adjust the contrast feature of the monitor.

• If you have an intermediate device, set the 75Ω/ Hi-z
properly. (refer to page 10)

• Check that you have properly connected the camera
to an appropriate power source.
(refer to page 11)

• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.

COLOR VIDEO CAMERA

21

2. Composition . Dimensions(mm)

Bracket Supporter

L-Torx Wrench

BNC Cable

6

Weatherproof
Zoom Camera

Sunvisor

Base Adapter

L-Wrench

W

W

ea

ea

t

t

Day

Day

&

N

&

i
g

h

N

t

i
g

h

t

l

a

)

t

i

g

i

D

x

0

1

/

l

a

c

i

t

p

O

x

2

2

(

m

o

o

Z

x

0

2

2

.

x

a

M

2

2

n

o

i

t

c

n

u

F

•

P

g

o

n

i

w

e

m

r

o

f

u

o

l

Z

C
O

L
O

R

Z

O

O
M

C

A

M

E
R

A

S

w

i

t
h

DA

Y

&

NI

O

W

NER

'
S

M

A

NU

O

SD

O

SD

O

n

­S
c

r
e

e
n

D
i

s
p

l
a

y

Owner's Manual

Weatherproof Zoom

Wall Mount Bracket

D

i
g
i
t

a
l

S
l
o

w
S

h
u
t
t

e
r

D

S

D

S

S

S

h

er

h

er

p

r

p

o

r

o

o

f

o

f

Co

l

o

Co

r
Cam

l

o

r
Cam

e
r
a

e
r
a

0

x

Z

o
o

m

E
R

I

E

S

G

H

T

A

L

Service Monitor Cable

3. Features

• High Resolution

The horizontal resolution of 480 TV lines can be achieved by
using a high density CCD having effective 410K(NTSC) pixels, which
provides clean, noiseless and reliable pictures.

• Built-in Power Zoom Lens

Subjects can be magnified up to 220 times with 22x optical zoom
and 10x digital zoom.

• High Sensitivity (Digital Slow Shutter)

Digital Slow Shutter is a function which enhances camera's sensitivity
electronically. When DAY/NIGHT mode is Auto, it automatically judges
whether it is day or night. Color images are provided in Day mode
and B/W images in Night mode. DSS setting value is fixed to 2 fields
of integration and twice the brightness in Night mode.

• Remote Control through RS-485 (Pelco-D)

Remote control operations are possible though RS-485 interface for
focus and zoom control. In addition, the unit lets you command
white balance and exposure manually using RS-485 interface.

• Electronic Iris

Electronic iris shutter is automatically controlled at the speed of
1/60 ~ 1/10,000sec (NTSC models),
1/50 ~ 1/10,000sec (PAL models).

• Heater

Depends on internal temperature, it operates automatically.

- Heater ON : under 10°C

COLOR VIDEO CAMERA

6. Remote Controller Operation

The remote controller is optional item.

Cable Connection (Pelco-D/ RS-485)

12. Specficications

Receiver

RS-485 Signal

1 2 3 4

Power

DC 12V, 500mA

- White Terminal :

- Black Terminal :

Receiver &
Remote Control

Remote Control

①

Camera Selection

①

1

32

4

6

5

7

9

8

A

A

0

SEQ PAN

②

⑥

⑤

7

14

PROG

FAR

AUTO

TELE

FOCUS

ZOOM

WIDE

NEAR

F1

F3

F2

Weatherproof Zoom

- After camera connects with receiver,
firstly check camera I.D.

- Press camera I.D. number(1~39 buttons)
on the top of wireless remote controller.

Example: ZOOM IN
I.D. No.5: Press 5 +<TELE

I.D. No.15: Press
I.D. No.24: Press
I.D. No.34: Press

Caution :

are selected from No.1 to No.39.
over I.D. No.40, you will have a use limit.

- Initial camera I.D. number is set up No.0

③

when it takes out of manufacturer's warehouse.

②

Menu (PROG): Shows / Hides Menu.

④

③ (

TELE):

④ (

WIDE):

⑤ (

NEAR):

⑥ (

FAR):

<F1>
<F2>
<F3>

Usually camera I.D. number

Moves up and down items.

Set data for the selected items.

>
+ 5 +<TELE
+ 4 +<TELE
+ 4 +<TELE

>
>
>

Signal (RS-485)

DVR System

Pelco-D Keyboard

COLOR VIDEO CAMERA

15

Scanning System

Horizontal Scanning Frequency

Vertical Scanning Frequency

Pick-up Device

Total Pixels

Effective Pixels

Horizontal Resolution

S/N Ratio

Lens

Minimum Illumination
(30IRE)

Synchronization

Signal Output

Operating Temperature

Storage Temperature

Power
Consumption

Dimensions (WxHxD)

Weight

22

Weatherproof Zoom

2 : 1 Interlace

15.734 kHz 15.625kHz

59.94 Hz 50 Hz

1/4 Inch SONY Super HAD CCD / EX-View CCD

811(H) x 508(V) 410K 795(H) x 596(V) 470K

768(H) x 494(V) 380K 752(H) x 582(V) 440K

480 TV lines

More than 48dB (AGC off)

22x Zoom Video AF

(F1.6(W), F3.7(T) f = 3.9~85.8mm)

1 Lux (Color) ,

0.001 Lux (DSS 128 FLD)

Internal

1Vp-p Composite Output with 75Ω Terminated

-10℃~+45℃ / -30℃~+45℃ (with Heater)

-20℃~+65℃

AC 24V (24~28V) / DC 12V (DC 9V~15V)

Max. 8W (AC 24V) / 9.6W (DC 12V)

110.8 x 218.6 x 325.7 mm

Approx 1.6kg

PALNTSCSignal System

COLOR VIDEO CAMERA

23