CNB BE3315PVR User Manual

True Day & Night

Day & Night IR Camera Series

P/N : 3810-0101B
(Ver.0708E)

Design and specifications
are subject to
change without notice.

Color Video Camera Series

ICR

ICR

Weatherproof IR LED

Weatherproof IR LED

Day & Night Color Camera

Day & Night Color Camera

)

R

C

I

(

t

h

g

i

N

&

y

a

D

e

u

r

T

•
s

t

550

n

u

o

TVL

•

S

u

p

e

r

H

i

g

h

R

e

s

o

l

M

s

s

a

P

e

l

b

u

t

i

o

n

•

C

a

COLOR VIDEO CAMERA

with DAY & NIGHT and IR LEDs

OWNER'S MANUAL

4. Name and Function of Each Parts

① ④⑤ ⑫⑩③②

OFFONOFF

OFF

ON

ON

DSS

AGC

BLC

D/N

FLK

D.Z

OFF

OFFONOFF

ON

ON

P/N

:

3310-0100A

⑥ ⑦ ⑧ ⑨⑪

①

Fixing Bolt for Sunvisor:

fix mounting bracket above.

②

Photo Sensor

③

IR LED (Infrared LED):

light condition.

④

Sunvisor:

protect the camera unit from rain
or snow outdoor.

⑤
⑥

(Wrench Bolt: rear- 2EA
& bracket- 3EA)

⑦
⑧
⑨
⑩
⑪
⑫

To reduce direct sunlight and

Function Selection
Mounting Bracket Fixing Bolt

Fix the camera main body to
bracket by wrench bolt.

Front body
Main body
Rear Body
Bracket
Safety Cover
Wall Mount Bracket

You can unfasten the bolt in order to

Automatically controlled according to

BRIGH

③

①

Function Selection Switch

BLC (Back Light Compensation): This feature would be useful when camera

is facing an object that has excessive light behind it. BLC prevents the center
of object from too much darkness. E.g.: Video camera in the store facing the
entrance doors.

ALC / ELC: This parameter is used for the adjustment of the lens iris.
ALC mode is for an auto iris lens and ELC mode is for a fixed or manual iris lens.
The default value is ALC mode. (ELC mode is not used for this product.)

AGC (Automatic Gain Control): With AGC ON, the setting, camera's sensitivity
is automatically increased when the level of ambient light drops. AGC function
automatically controls signal gain in the range of maximum 28dB.

FL (Flickerless): If the camera is used with 50Hz fluorescent lighting,

there maybe flicker on the screen. In this case, FL switch should be set
to ON position. But, FL switch should be set to OFF position if 60Hz
power source is used.

②

DC LEVEL Adjustment V.R

Used to adjust video output level of DC driven auto iris lens or
ELC mode. When the brightness control of the monitor does not
operate correctly.

③

VIDEO OUT Connector: Use for installation and service.

VIDEO

SW1

P/N

ON

ALCELC

BLC OFF

:

3310-0100B

ELC

BLC ON

ONFL OFF

OFF

AGC ON

②

①

. User Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION!

Explanation of two Symbols

enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE
ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE"

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
"dangerous voltage" within the product's

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance-(servicing) instructions in the

INFORMATION

This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the
equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.

This installation should be made by a qualified service person
and should abide to all local codes.

8

Weatherproof IR LED

External Lens Adjustment of Zoom and Focus

The lens control grooves are exposed for easy focus & zoom adjustment.

①

①

External

Focus Adjustment

Focusing on
a far subject.

②

External

Zoom Adjustment

Zoom in from
the subject.

Safety Cover is provied for concealing the grooves
to protect your settings.

F N

T W

F N

T W

②

Focusing on
a near subject.

Zoom out from
the subject.

COLOR VIDEO CAMERA

5. Installation

Connecting to Power Supply

For AC 24V / DC 12V Power Type

- The wire is non-polarized.

- Use AC 24V power source or DC 12V power source.

For DC 12V Power Type

- The wire is polarized.

- Use DC 12V power source.

#

1

#

2

#

3

#

4

#

5

#

6

Line ColorNo. Function

#1 RED DC12V/AC24V(H

ORANGE GND/AC24V(N

#2

#3 BLACK GND(VIDEO

#4

YELLOW VIDEO OUT

#5

GREEN Not Used

#6

BROWN Not Used

)

)

)

9

2

Weatherproof IR LED

. Contents

Thank you for purchasing this COLOR VIDEO CAMERA.

Before operating the camera, confirm that you have the right
camera model and proper power voltage.
In order to help you understand this manual, we'll introduce
our model's description.

Precautions

1.

Composition

2.

Features

3.

Name and Function of Each Parts

4.

Installation

5.

Specifications

6.

Troubleshooting

7.

11

13

14

COLOR VIDEO CAMERA

1. Precautions

Do not install the camera in extreme temperature conditions.

Do use the camera under conditions where temperatures are within

-10°C to 50°C. Especially be careful for ventilation under high temperature.
(with heater : -30°C ~ 50°C)

Do not install or use the camera in an environment where the
humidity is high.

It can cause the image quality to be poor.

Do not install the camera under unstable lighting conditions.

5

6

7

8

Severe lighting change or flicker can cause the camera to work improperly.

Never use the camera close to a gas or oil leak.

It can cause malfunctions to occur.

Do not disassemble the camera.

There are no user-serviceable parts inside it.

Do not drop the camera or subject them to physical shocks.

It can cause malfunctions to occur.

Never keep the camera face to strong light directly.

It can damage CCD.

Note
When this camera is installed near wireless communication
devices that emits strong electromagnetic field, irregularity
such as noise on the monitor may appear.

3

Weatherproof IR LED

Connecting to Monitor

COLOR VIDEO CAMERA

6. Specifications

For Video Output Model

Cable the VIDEO out to the monitor video in jack.

#

OFFONOFF

OFF

ON

ON

DSS

AGC

BLC
D/N

FLK

D.Z

OFF

OFFONOFF

ON

ON

P/N

:

3310-0100A

Weatherproof
IR LED Camera

3

#

4

Monitor

As the connecting method varies with the instruments, refer to the
manual supplied with the instrument.

Connect the cable after power is turned off.

Set the 75Ω/ Hi-Z selection switch as shown below if you have an
intermediate device.

OFFONOFF

OFF

ON

ON

DSS

AGC

BLC

D/N

FLK

D.Z

OFF

OFFONOFF
ON

ON

P/N

:

3310-0100A

Weatherproof

IR LED Camera

Intermediate

Video Receiver

End monitor

Signal System

CCD Pick-up Element

Effective Pixels

Video Output

Sync. System

Luminance S/N Ratio

Resolution

Sensitivity

Lens

White Balance

Auto Gain Control

Back Light Compensation

Flickerless

Operating Temperature

Storage Temperature

Power Consumption

(Option: DC12V)

Dimensions (WxHxD)

Weight

AC 24V(20V~28V) or DC 12V(11V~15V), Max. 11W / 1.4A

Super High ResolutionModel

NTSC PAL

2:1 Interalce Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V)

Composite: 1.0V p-p, 75Ω

Internal Sync

48dB Min. (AGC OFF)

550 TV lines

0.3 Lux (Color) / 0 Lux (IR LED On)

DC Iris Vari-focal Lens (f=3.8~9.5mm F1.2)

Auto (AWB)

On / Off Selectable

On / Off Selectable

On / Off Selectable

-10℃~+50℃

-20℃~+65℃

ADAPTOR : DC 12V, 1.0A (Max)

83(Ø) x 160.4(H)mm

Approx. 1.2kg

1110

4

Weatherproof IR LED

2. Composition . Dimensions(mm)7. Troubleshooting

3. Features

COLOR VIDEO CAMERA

Sunvisor

5

12

Weatherproof IR LED

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.

Problem Solutions

Nothing appears on
the screen.

The image on the
screen is dim.

Weatherproof IR LED Camera

Bracket

1. Super High Resolution

The horizontal resolution of 550 TV lines can be achieved by

using a high density CCD, which provides clean, noiseless

and reliable pictures.

2. IR LED

Determines whether IR LED light will be on/off at night, for use of

external IR LED lamp when Day & Night mode is on

- D/N ON : uses built-in IR LED in night state.

Safety Cover

T
r
u

I

I

Wea

Wea

ther

ther

p

r

p

o

r

o

o

f

o

I

f

R

I

R

D

a

y

D

a

&

y

N

&

i
g

N

h

i

t

g

C

h

ol

t

C

or

ol

C

or

C

)

R

C

I

(

t

h

g

i

N

5

5

0

T
V

L

&

y

a

D

•

e

S

u

r

u

T

p

•

e

r

s

H

t

i

n

g

h

u

o

R

M

e

s

s

o

s

l

u

a

t

P

i

o

e

n

l

b

•

a

C

C

O
L

O

R

V

I
D

E
O

C

A

M

w

E
i
t

R

h

A

D

A
Y

&

N

I

G

H

T
a

n
d

I
R

L

E

D

s

OW

N

ER

'
S

M

A

N

U

A

L

Owner's Manual

e
D

a
y

&
N

i
g
h

t

CR

CR

L

E

L

D

E

D

a

m

a

e

m

r

a

e

r
a

L-Wrench

L-Torx Wrench

Service Monitor Cable

BNC Cable

AC PLUG

- D/N OFF : dose not use built-in IR LED night state.

3. Fan / Heater

Depends on internal temperature, it operates automatically.

- Fan ON : over 45°C

- Heater ON : under 10°C

The image on the
screen is dark.

The camera is not
working properly,
and the surface of
the camera is hot.

The image on the
screen flickers.

AC Adaptor (Option)

• Check that the power cord and line connection
between the camera and monitor are fixed properly.

• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.

• Is lens stained with dirt? Clean your lens with soft,
clean cloth.

• Set the monitor to proper condition.

• If the camera is exposed to too strong light, change
the camera position.

• Adjust the lens' focus properly.

• Adjust the contrast feature of the monitor.

• If you have an intermediate device, set the 75Ω/ Hi-z
properly. (refer to page 12)

•

Adjust DC Level, VR Level properly. (refer to page 9)

• Check that you have properly connected the camera
to an appropriate power source.
(refer to page 11)

• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.

COLOR VIDEO CAMERA

13

6

Weatherproof IR LED

COLOR VIDEO CAMERA

7

14

Weatherproof IR LED

COLOR VIDEO CAMERA

15