CN2HK Limited CK-GSM-9003 User Manual

CN2HK LIMITED
Wireless AUTODIAL GSM SMS Home Alarm
Security System 900/ 1800/ 1900Mhz(CK-GSM-9003)
User Manual
After you finish reading this manual, store it in a safe place for future reference.
ENG
Index
Product Description......................................................................................................................... - 1 -
Product Interfaces ........................................................................................................................... - 1 -
Specifications ................................................................................................................................... - 3 -
Before Start ...................................................................................................................................... - 3 -
How can I start the alarm unit ........................................................................................................ - 4 -
How can I reset the operation password......................................................................................... - 4 -
How can I record voice message...................................................................................................... - 5 -
How can I store emergency phone numbers ................................................................................... - 5 -
How can I enable the siren sound when alarm is triggered ........................................................... - 6 -
How can I mute the siren when alarm is triggered......................................................................... - 6 -
How can I enable siren prompt sound by remote controller.......................................................... - 6 -
How can I disable siren prompt sound by remote controller......................................................... - 6 -
How can I set the siren hooting time ............................................................................................... - 7 -
How can I factory reset the alarm unit ........................................................................................... - 7 -
How can I add new remote controller............................................................................................. - 8 -
Operation Command List ............................................................................................................... - 8 -
Working with Remote Controllers.................................................................................................. - 9 -
How can I add more detectors....................................................................................................... - 10 -
How can I synchronize a wireless keypad to the alarm unit ........................................................ - 11 -
How can I remote control the alarm system by phone dial-in ..................................................... - 12 -
How can I remote control the alarm system by SMS messages ................................................... - 12 -
Product Description
This wireless GSM alarm system provides extra security over ordinary wired phone line system preventing cutting lines. This advanced model has a built-in UPS battery and prove to provide 24 x 7 non-stop alarm service. Its built-in memory can store 6 pre-set emergency phone numbers and SMS messages. Once the alarm is triggered by any detectors, the siren would loud and the system will automatically dial to your pre-set phone numbers one by one automatically and/or send SMS messages to alert you. Not only this but you could listen to your protected house and hear what is going on there.. The system factory kit (default) includes two wireless zones detectors: wireless PIR Motion Sensor and Magnetic window/door contact. You can add more different kinds of detectors to fulfill your IDEAL HOME ALARM SYSTEM, including PIR, GAS LEAKAGE DETECTORS, SMOKE DETECTORS and MAGNETEC WINDOW/DOOR CONTACT, etc. This All-in-one GSM AutoDial SMS Home Security System is very easy to install and ideal for DIY.
Product Interfaces
1. Network LED
2. ARM LED
3. Power LED
4. Antenna
5. Microphone
6. Alarm LED
Back Panel:
1. Power Slot for connecting to a 6V power supply
2. Siren Slot
3. On/Off switch for internal rechargeable backup battery
Side Panel:
- 2 -
Specifications
GSM Frequencies: GSM 900/1800/1900 Mhz
Wireless Frequency: 315Mhz or 433Mhz
Working Resistance: 1.5M (muse)
Power Supply: 6V, 2A
Antenna: 100 meters without signal interference
Stand-by Current: <90mA
Alarm Current: <200mA
Power Consumption: 0.5W
Built-in Li-ion internal rechargeable backup battery: 1800mA 3.6V
Remote two-ways intercom
Built-in internal microphone for remote listening in
Emergency Phone Calls
SMS Messages Alert
Come with a wireless keypad for programming
Set Alarm ON/OFF by remote controllers
Remote control alarm unit by phone dial-in
Remote control alarm unit by sending SMS messages
Can record a 10 seconds voice message
Can Store 6 emergency phone numbers with extensions supported (optional)
Can Store 1 phone number for receiving SMS messages
13 ZONES FOR WIRELESS SENSORS
Partial ARM mode
SMS Messages Alert on EXTERNAL POWER FAILURE OR RECOVERY
Before Start
1. Please prepare a GSM SIM card which fulfills the following requirements: i. Unlocked with no PIN code embedded. ii. On GSM frequency 900/1800/1900Mhz iii. Without any telephone numbers or messages stored.
2. Please note that this is a pure GSM alarm system which cannot be functioned without inserting a proper GSM SIM card. Also, all emergency phone numbers or SMS messages would be dialed / sent via the GSM SIM card’s network.
- 3 -
Loading...
+ 11 hidden pages