Page 1
USER’S MANUAL
CA-S10MT
CM Tech Co., Ltd.
Page 2
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC RF INTERFERENCE STATEMENT
Note:
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
This equipment has been tested and found to comply with the
If this equipment does cause harmful interference to radio or
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician
for help.
◎
Caution ( )
Do not change or modify the product without permission or
authority of manufacturer. It may cause undesirable operations,
permanent damages or harmful interferences.
◎
Notice ( )
·
Design and specification are subject to change without notice for product
improvement purposes.
Page 3
Multi Format Audio Player [MP3 / WMA]
FM Radio / FM Broadcasting Recording
Voice Recording
External Data Storage [Plug & Play]
TTS 2.0 [Text To Speech]
Song Title Display
◎
Contents
·
Design and specification are subject to change without notice for
product improvement purposes.
◎
PC System Requirements
·
Processor: Pentium 233MHz
·
Windows98 / 98SE / ME / 2000PRO / XP
·
Hard Disc: 1GB or more available
or better
·
Memory: 64MB DRAM or better
·
Monitor Resolution: 1024 x 768, 16Bit Color or better recommended
·
USB Port mounted
·
CD-ROM drive to install Software
◎
Description of Product Part
·
Front [fig-e01]
·
LCD Screen / Menu Button / Volume Control Button / Rewind Button / Fast
Forward Button / Play/Pause Button
·
Rear [fig-e02]
·
Earphone Jack / Microphone / Necklace Holder / Battery Cover / USB Jack
/ Hold Switch
◎
Direction of USB Cable Connection
Page 4
[fig-03]
◎
Accessories
·
User’s Manual / Installation CD / USB Cable / Small-sized USB Adaptor / Earphone
(FM Antenna Embedded) / Carrying Case / Battery 1 (1.5V AAA Type)
·
FM radio reception sensitivity could be lowered when other earphones than the
provided one are used.
◎
USB Port Inspection
1. Before program installation, please inspect the USB port first.
2. Execution Order : 'My Computer
Manager'
3. Check if there is ‘Universal Serial Bus Controllers’ in the device controller
list.
4. It will be displayed as ‘General Serial Bus Controllers’ or ‘Universal Serial
Bus Controllers’ depending on the PC environment. [fig-e04]
5. USB port cannot be used if there is no 'Universal Serial Bus Controllers'. In
such a case, please ask the sales agent of your PC for its service before
installation.
◎
Program Installation
< Caution >
→
View system information → Hardware → Device
·
Before installation, please disconnect other USB products connected to the USB
port.
·
Do not connect the product to your PC until successfully installing the program.
If you have already connected the product to your PC, disconnect it before
proceeding.
< Note >
Page 5
·
This manual is based on Windows XP. Appearance can be different depending on
the version of Windows you are using.
1. Insert the supplied CD-ROM into the CD-ROM drive of your PC. The dialog box
shown below should appear. If the installation program does not start
automatically, double-click ‘Install.exe’ of the CD. [fig-e05]
2. Click the ‘Install’ button on the picture to begin installation. Select the
‘MP3 Driver+TTS’ button to use the TTS function. (Usually it takes about 5 minutes
if TTS is selected. The necessary time is somewhat different depending on the PC
environment.)
3. Click "Next"
e06] [fig-e07]
4. After your PC has restarted, you will see the 'Live Music_K Explorer' icon on
your PC.
5. With the battery installed in the product, connect the product to the USB port
on your PC, and then press the '
6. Execute 'Live Music_K Explorer' and a window will appear as shown below. [fig-
e08]
→
"Finish" to complete the installation and restart your PC. [fig-
▶/■
' button to turn on the product.
◎
Program Deletion
Page 6
1. If the product is already connected to your PC, disconnect it.
2. Execute “Control Panel”
installed programs.
3. Search the list for 'Live Music_K' and click on the “Change/Remove” button. A
window will appear as shown below. Select the "Remove" button, and then click
"Next", "OK" and “Finish” to complete the deletion. Restart your computer after
deletion. [fig-e09] [fig-e10] [fig-e11] [fig-e12]
4. If the installation was not successful or if you need to reinstall the program
→
“Add or Remove Programs” to see a list of the
for any reason, follow the program deletion procedure and put the CD-ROM in for
installation.
< Note >
·
If you want to delete the TTS program, execute 'Controller' → 'Add or Remove
Programs’. Then search the list for 'TTSPad 2.0' and click “Change/Remove” to
start deleting.
◎
Formatting (After installing the program)
1. Please execute formatting periodically for the efficient use of the memory.
2. Format the removable disc drive to delete all the files and initialize the
drive.
3. With the battery removed from the product, connect the product to the USB port
of your PC and press the '
4. Execute “Start
your PC. The format window will appear as shown below. Click “Start” to start
→
Programs → Live Music_K Audio Player → Live Music_K Format” on
▶/■
' button to power up the product.
Page 7
formatting. [fig-e13]
5. When formatting is completed, press the 'Close' button to close the formatting
window. [fig-e14]
6. After formatting, disconnect the product from your PC and put the battery in it.
Then press the '
your PC again to use.
◎
Updating (After installing the program)
1. Update the firmware of the product.
2. With the battery removed from the product, connect the product to the USB port
of your PC and press the '
3. When the “Found New Hardware Wizard” appears as shown below, click "Next"
"Finish". [fig-e15] [fig-e16]
4. After installation is completed, check if there is 'Player Recovery Device
▶/■
' button and check if the power is on before you connect it to
▶/■
' button for more than 10 seconds.
→
Page 8
Class' in the device controller. (Device controller : My Computer → View system
information
→
Hardware → Device Manager) [fig-e17]
→
5. Click “Start”
When a window appears as shown, click “Next”
“Program”→ “Live Music_K Audio Player”→ “ Live Music_K Update”.
→
“Finish”. [fig-e18] [fig-e19]
6. The update window will appear as shown below. Then click “Start” to start
updating. (In case of Window98/98SE, you need to click “Start”
Music_K Audio Player”
→
“Live Music_K Update” again to see the update window. [fig-
→
“Programs”→ “Live
e20]
7. When updating is completed, press the “Close” button to close the update window.
[fig-e21]
Page 9
8. To use the program, disconnect the USB cable from the product, wait 10 seconds,
and then reconnect the USB cable to the product. When the "READY" message appears
on LCD, start 'Live Music_K Explorer' on your PC. If you do not disconnect and
reconnect the USB cable, the program will not run.
9. Always use the Format utility according to the “formatting procedure” after
updating.
10. The pictures may be different in case of Window98 / 98SE.
< Note >
·
The update as above is only for the initial installation. If you update 2 or
rd
more times in a PC, the 3
·
When a removable disc appears in My Computer, please click the right button of
the mouse to start formatting.
◎
How to Download a Music File to the Product
and 5th items will not appear.
1. With the battery installed in the device, power up the device and connect it to
the USB port on your PC.
2. When the "READY" message appears on the LCD, click the 'Live Music_K Explorer'
icon on your PC to launch the program. [fig-e22]
3. Press the 'Search' button in the upper end of the program to search for the
Page 10
music files stored in your PC. [fig-e23]
4. To search a drive for music files, select a folder or drive you want to search
in the left window and press the ‘search’ button. The MP3 / WMA files that are
found in the selected drive or folder will be displayed in the middle pane of the
interface.
5. Drag and drop those music files you want to download from the middle pane onto
the designated folder in the right window. [fig-e24]
6. While the files are being downloaded, the "WRITING" message will flash on the
LCD of the product, and when the download is completed, the "READY" message will
be displayed. An error may occur if you disconnect the USB cable as soon as the
"READY" message is displayed. Please wait approximately 10 seconds before
disconnecting the cable.
7. Once the USB cable is disconnected, the device will be automatically powered on.
Press the '
▶/■
' button to play the music.
8. If an error occurs, follow the formatting procedure described above.
< Note >
·
When you open My Computer or launch Windows Searcher, you will see the removable
disk icon. You can then copy MP3 / WMA files to the removable disk.
·
The order of songs played by the device depends on the file name, especially on
the first letter of the name. If the first letter of a song is a special character,
that song will be played first. Next, comes a song with a numeral. After the
numeral, the order is then arranged by an English character, a Chinese character,
and a Japanese character.
Page 11
◎
Text to Speech Transformation (TTS)
< Note >
·
TTS(Text to Speech) is a system for transforming text into voice. TTS
transforms letters from the Internet or text files input by users into MP3-format
voice files. (4 languages: Korean, English, Japanese, and Simplified/Traditional
Chinese)
·
Voice files stored in the device are portable and can be heard anywhere, anytime.
Please connect the device to your PC first to execute TTS.
·
For the details of TTS function, please click the ‘?’ button in the upper end of
the TTS program.
1. Click the TTS icon in the upper end of the program in 'LIVE MUSIC_K Explorer'
[fig-e25]
2. Press 'Option'
e26] [fig-e27]
3. Input a sentence and press the '
→ '▼' →
'OK' in the window to choose a language you want. [fig-
▶
' button to hear the sentence. [fig-e28]
Page 12
◎
TTS File Storage
1. TTS files can be stored in the form of 'txt" files. Click the ‘Save’ icon in
the upper end of TTS program and you will see a window as shown here. Choose a
folder and store the contents you input as ‘txt’ file. [fig-e29]
2. TTS files can be stored in MP3. Click the ‘Generator’ icon in the upper end of
TTS program and you will see a window as shown below. Input a file name and click
the ‘Start’ button. [fig-e30] [fig-e31] [fig-e32]
3. To complete generating a file, click the ‘OK’ button in the
‘
LiveMusic_K’window after clicking the ‘Start’ button.
◎
Dictionary Use
1. In Dictionary, reading and defining words are possible. Words are stored by
languages (Korean, English, and Japanese) and the stored ‘reading and definition’
will be played.
2. Click 'Option' on the TTS window. [fig-e33]
Page 13
→
3. Input a word and click 'ADD'
◎
Inserting a Battery
1. Open the cover on the right side of the product by pushing it to the arrow
direction and pulling it up.
2. Insert the battery according to the direction inscribed on the back and push
the cover shut.
◎
Button Operation by Modes
Button Normal Mode Menu Mode FM Mode
'OK'. [fig-e34]
▶/■
▶▶
/ ◀◀
M
+ / -
◎
Menu Function
Mode Main Sub Menu 2nd Sub Contents
·
Power on / off
·
Playback / Pause
·
Search
·
Stop (Pause)
·
Menu
·
Section
Repetition Setting
·
Volume Control (0~32 stages)
·
Power on / off
·
Menu Change
·
Mode Selection
·
Power on / off
·
FM Recording /
Stop
·
Frequency search
·
Memory Address
Change
·
Frequency Storage
·
FM Mode
Cancellation
Page 14
Menu Menu
MUSIC
DVR
FM
DVR REC
EQ
REPEAT
·
Play MP3 or WMA files
< Voice Playing >
< Music File Playing >
·
Play recorded voice files
<FM Radio >
·
Listen to FM radio and set
broadcasting frequency
< Voice Recording >
·
Record voice
< EQ Setting >
·
ROCK, POP, CLASSIC, JAZZ,
NORMAL
< Repeat Playing >
·
RPT-1, RPT-ALL, RAND-1,
RAND-ALL, NORMAL
<SCROLL : Title Display Speed >
SET
DELETE
BOOKMARK
· ×
0, ×1, ×2, ×3, ×4
<BACKLIGHT>
·
0sec, 3sec, 5sec, 10sec, CON
(Consecutive on)
<AI-OFF : Automatic Power Off >
·
1min, 2min, 5min, 10min,
DISABLE (Consecutive on)
<FM MODE>
·
SCAN : Scan broadcasting
frequency and store it
·
PRESET : Select the stored
broadcasting frequency to hear
< File Deletion >
·
MUSIC(MP3, WMA), VOICE, EXIT
< Bookmark Not Used >
< Edit the Play List >
Page 15
< Delete All the Songs Selected
in the Play List >
FOLDER
EXIT
1. Turn on the product and press the 'M' button while it is stopped to move to the
menu mode.
2. There are MUSIC, DVR, FM, DVR REC, EQ, REPEAT, SET, DELETE, and EXIT functions
in the menu mode. Press the '
want.
3. Select 'EXIT' at the end of the menu and press the 'M' button to come out of
the menu mode.
4. The menu mode is automatically released if there is no button entry for 5
seconds.
< Menu Mode Cancel >
▶▶
' or '◀◀' button to switch the menu to one you
< Move to Main Menu >
< Folder List >
·
Selectively play the songs
in the folder only
< Note > How to Use Menu (In case of setting EQ)
·
Stop state → 'M' button → → Pressing the '▶▶/◀◀' button to select
'EQ' → 'M' button
·
→ Pressing the '▶▶/◀◀' button to choose EQ (ROCK, POP, CLASSIC,
JAZZ)
→
'M' button
·
→ Pressing the '▶▶/◀◀' button to choose 'EXIT' → 'M' button → Set
EQ display on the upper end of LCD
◎
Music File Playing
1. Turn on the product and press the '
one more time to pause.
2. Select a song you want to play and press the playback button. When the button
is pressed, the song title will scroll across the LCD from right to left.
▶/■
' button to play music. Press the button
Page 16
3. If you want to stop, press the '▶▶' or '◀◀' button while it is in pause.
4. If you want to play another song while a song is playing, press the '
'
◀◀
' button and choose another song.
5. By pressing the '
volume up to 32 stages.
< Note >
·
This product can store up to 256 music and voice files.
·
In the event of MP3 file’s playing, a text display of song titles may vary
depending on the way ID3 tag was written.
·
This product supports ID3v1/v2. It will display the song title of ID3 if there
is ID3 data.
◎
Voice Recording and Playing
1. In case of voice recording, press the '
'DVR REC' mode and press the 'M' button to start recording.
＋
' or '－' button in front of the product, you can control the
▶▶
' button on the menu mode to move to
▶▶
' or
2. '
●
' or 'REC' message will appear in the LCD screen during recording. Press the
‘M' button again to stop recording.
3. When you want to play the recorded contents, move the '
mode in the menu mode and press the 'M' button.
4. To play the recorded voice, press the '
pause.
5. To return to the initial state, press the '
change to stop state and press the 'M' button.
◎
FM Radio Frequency Storage
1. If you want to store a frequency, press '
mode and press the 'M' button.
2. In this status, press the '
▶▶
' button to move to 'FM MODE' and press the 'M'
▶/■
' button. Press it one more time to
▶▶
' button in a pause state to
▶▶
' in menu mode to switch into 'SET'
▶▶
' button to 'DVR'
Page 17
button.
3. In ‘FM MODE', press the '
menu mode.
4. You have to move to ‘FM’ by pressing the '
before you store a frequency.
5. In this status, press the '
you want to store and press 'M' for a long time. Then an address to store will
appear.
6. Select an address you want to use by pressing the '
press the 'M' button to store a frequency.
▶▶
' button to switch into 'SCAN' and return to the
▶▶
' button in the initial menu mode
▶▶
' or '◀◀' button until you find the frequency
▶▶
' or '◀◀' button and
7. To return to the initial state, press the 'M' button shortly.
◎
FM Radio Hearing
1. If you want to listen to FM radio of the frequency you store, go to 'SET'
MODE'
→
'PRESET' and return to the menu mode.
2. In the initial menu mode, move to ‘FM’ mode by pressing the '
press the 'M' button.
3. In this status, move to the stored address by pressing the '
button and listen to the FM radio.
4. To go out of the FM radio, press 'M' to move to the menu mode.
▶▶
' button and
▶▶
' or '◀◀'
→
'FM
5. When you want to search for a frequency to listen to, switch to 'SET'
→
'FM
Page 18
MODE' → 'SCAN' in menu mode and return to the menu.
6. In this state, press the '
want and listen to the radio.
7. To go out of the FM radio, press the 'M' button to move to the menu mode.
◎
FM Radio Broadcasting Recording and Hearing
1. If you want to record the FM radio broadcasting while you are listening to it,
press the '
'
▶/■
2. '
●
3. The recorded file is stored in the voice folder of the product. When you want
▶/■
' button at the point you want to start recording and press the
' button again at the point you want to finish it.
' will appear in the LCD screen during recording.
▶▶
' or '◀◀' button to search for a frequency you
to play the recorded file, move to 'DVR' mode in the menu.
4. In case of a 128MB-memory product, you can record FM radio broadcasting up to
some 1 hour and 40 minutes.
◎
Equalizer Function
1. To control the music tone, press the '
the 'EQ' mode and press the 'M' button.
2. In this state, you can change the mode 'ROCK
until you find the tone you want by pressing the '
button to select one.
3. To return to the menu mode, move to EQ mode by pressing the ‘M’ button and
(EQUALIZER)
▶▶
' button in the menu mode to move to
→
POP → CLASSIC → JAZZ → NORMAL'
▶▶
' button and press the ‘M’
press the ‘M’ button again after selecting EXIT by using the '
▶▶
' button.
Page 19
◎
Repeat Playing
(REPEAT)
1. If you want to listen to a song repeatedly, press '
move to 'REPEAT' mode and press the ‘M’ button.
2. In this status, you can change the mode 'RPT-1
NORMAL' by pressing the '
button.
3. If you want to return to the initial state, press the 'M' button to move to
'REPEAT' mode, select ‘EXIT’ by pressing the '
button again.
◎
Section Repeat
1. Press the ‘M’ button on the front to select a repeat while a song or voice
message is playing.
2. Press the ‘M’ button to select the first and the last point of the file to
repeat. ‘A-B’ message will appear in the LCD screen.
(REPEAT A-B)
▶▶
' button. Select a mode you want and press the 'M'
▶▶
▶▶
' in the menu mode to
→
RPT-ALL → RAND-1 → RAND-ALL →
' button, and press the 'M'
3. Press the ‘M’ button again to cancel.
◎
Scroll
1. If you want to change the speed of what is being displayed on the LCD, press
the '
2. In this status, press the '
button.
3. You can change the mode 'x4
Select a mode you want and press the 'M' button to return to the menu mode.
◎
Backlight
(SCROLL)
▶▶
' button on the menu mode to move to 'SET' mode and press the ‘M’ button.
▶▶
' button to move to ‘SCROLL’ and press the 'M'
→
x0 → x1 → x2 → x3' by pressing the '▶▶' button.
(BACKLIGHT)
Page 20
1. If you want to change the backlight time on LCD, press the '
menu mode to move to 'SET' mode and press the ‘M’ button.
2. In this status, press the '
button.
3. You can change the mode '5sec
pressing the '
button to return to the menu mode.
◎
Automatic Power Off
1. If you want to change the backlight time on LCD, press the '
menu mode to move to 'SET' mode and press the ‘M’ button.
▶▶
' button in ‘BACKLIGHT’. Select a mode you want and press the 'M'
(AI-OFF)
▶▶
' button to move to ‘BACKLIGHT’ and press the 'M'
→
10sec → CON (consecutive on) → 0sec → 3sec' by
▶▶
' button in the
▶▶
' button in the
2. In this status, press the '
button.
3. AI-OFF is displayed in LCD. Now you can change the mode 'DISABLE (consecutive
off)
→
1min → 2min → 5min → 10min' by pressing the '▶▶' button. Select a mode
you want and press the 'M' button to return to the menu mode.
◎
Deleting File
1. If you want to delete a file stored in the product, press the '
the menu mode to move to 'DELETE' mode and press the ‘M’ button.
2. In this status, press the '
press the 'M' button.
(DELETE)
▶▶
' button to move to ‘BACKLIGHT’ and press the 'M'
▶▶
' button in
▶▶
' button to select a music or voice file and
Page 21
3. Now, ‘YES NO EXIT’ is displayed in LCD with the file you want to delete. Using
the '
▶▶
' or '◀◀' button, select 'YES' if you want to delete the file or select
'NO' if you don’t. If you want to change the mode, select 'EXIT' and press the 'M'
button.
◎
Bookmark Function
(BOOKMARK)
1. If you want to make a playback file list, press the '
mode to move to 'BOOKMARK' mode and press the 'M' button.
2. In this status, press the '
button.
3. If you have chosen a folder, only the songs in that folder will appear. If you
haven’t, all the songs in the current removable disc will appear. [fig-e35]
4. Move to a song you want to choose by pressing the '
press the 'M' button to select it. [fig-e36]
▶▶
' button to move to 'EDIT' and press the 'M'
▶▶
' button in the menu
▶▶
' or '◀◀' button and
5. After selection, press the '
< Note >
·
If you select ‘Delete/Add File’ or ‘Folder’ with ‘Bookmark’ displayed, all the
chosen songs will be deleted and the file list be initialized.
◎
Folder List
1. In order to use ‘Folder List’, you should make a new folder by clicking the
right button of the mouse on ‘Removable Disc’.
2. If you want to listen to the songs in a fold you choose, press the '
(FOLDER)
▶/■
' button to play the songs you have chosen.
▶▶
' button
Page 22
in the menu mode to move to 'FOLDER' mode and press the 'M' button.
3. In this status, press the '
the 'M' button to play the music in that folder.
4. If you want to choose another folder while you are listening to one, go to
‘FOLDER’ mode again and press the ‘M’ button shortly. You can choose only one
folder at a time.
5. '
☆
' mark will be displayed by the selected folder. Move to a folder you want
▶▶
' button to move to the folder you want and press
to choose by pressing the '
pressing the 'M' button to play the music in that folder
6. To cancel the ‘Folder’ function and listen to the whole music, return to
'FOLDER' mode and press the 'M' button for a long time.
7. If there are more than 20 folder in ‘Removable Disc’, it may take longer than
normal to turn on the unit.
◎
Hold Function
1. This function is used to keep other functions from working while the product is
running.
2. Push the 'HOLD' switch at the bottom of the product to the arrow direction and
the other key function will not work.
3. At this state, the 'Lock Mark will be displayed at LCD panel. To escape, return
the HOLD switch to the other side.
◎
Troubleshooting Tips
(HOLD)
▶▶
' or '◀◀' button and press the '▶/■' button after
·
Please check the followings first if the product does not work properly.
Problems Solution
·
Check if the 'HOLD' switch on the lower end of
·
The buttons of the
product do not work.
·
The music file is not
played.
the product is locked.
·
Turn the 'HOLD' switch to the original
direction.
·
Check if the extension is 'MP3' or 'WMA'.
·
This product can play only the 'MP3' and 'WMA'
files.
Page 23
·
Power is not on.
·
It stops in an initial
state.
·
Used space is displayed
while there is no file
stored.
·
Other errors of the
product.
·
Check the polarity of the battery.
·
Check the remained capacity of the battery.
·
Remove the battery from the product, connect
the product to a PC using a USB cable and power
it on. When you power the product on, ‘READY’
sign will appear on the LCD.
·
In this status, refer to the Formatting
Procedure of this manual.
·
If it stops in an initial state and the
problem is not solved by formatting, please start
'Live Music_K Update'.
·
Remove the battery from the product and
reinsert it.
·
Check if SCSI Host Controller is listed in the
Device controller. (Device controller: My
·
Although the product is
connected to a PC, the
removable disk is not
generated.
computer
→
System Information → Hardware → Device
Controller)
·
If it is not caught normally as below, click
the right button of the mouse to delete it.
(In case of Window 98 / 98SE)
[fig-e37]
(In case of ME / 2000PRO / XP)
[fig-e38]
·
After deletion, click 'hardware change search'
icon in the upper end to newly install the
device.
·
When it is normally installed, the yellow
exclamation mark in the front will disappear.
·
If there isn’t any new
hardware detected
·
Check 'Control Board → System (System
Registration Information)
→
Device Controller and
see if there is ‘USB Controller (General Series
Bus Controller, Universal Series Bus Controller).
Page 24
◎
Product Specification
·
If you do not have the above devices in your
PC, you cannot use a USB port. In this case, you
have to so set the bios (CMOS) environment that
you can use a USB port.
·
Contact the sales agent for a detailed setting
method.
Main Function
256MB 256MB Flash Memory
Memory
Interface USB USB Port
File Transmission Speed 7Mbps
Display dot FSTN LCD (EL backlight)
Voice
Recording
Time
Battery AAA Type 1EA
Operating Time 12-hour consecutive play (Alkaline battery used)
Output Power
S/N (Noise Ratio) 90dB (20KHz LPF)
Case Aluminum
128MB 128MB Flash Memory
64MB 64MB Flash Memory
256MB 16 hours
128MB 8 hours
64MB 4 hours
MP3/WMA Player / FM Tuner / Voice Recorder /
Removable Disc
5mW
×
2 (16Ω)
Safety Standard
Dimension (W×H×D)
Net Weight (without
Battery)
◎
Guarantee
Product MP3 Player (CA-S10MT)
Assurance Period 1 year
CE, FCC (FCC ID :),
MIC ()
(mm)
g
Page 25
Sales Date yy mm dd
Customer
Name
Address
Telephone
Sales Agency
Name
Address
Telephone
Customer Support Center
·
If an error occurs, please contact the sales agency.
◎
Memo
Loading...