C-MORE EA9-T6CL-R, EA9-T6CL, EA9-T8CL, EA9-T10CL, EA9-T12CL Quick Start Manual

®

Quick Start Guide

Quick Start Guid

e

Quick Start Guid

e

3505 HUTCHINSON ROAD

CUMMING, GA 30040-5860

Copyright 2016, Automationdirect.com Incorporated/All Rights Reserved Worldwide

Minimum items required to create a working system:

• C-more EA9 Touch Panel - 6”, 7” wide, 8”, 10”, 12” or 15” model

• C-more Programming Software, p/n EA9-PGMSW

• Personal computer - to run the C-more programming software

• C-more USB Programming Cable, p/n USB-CBL-AB15 or Ethernet connectivity between PC and
Touch Panel

• Power source: C-more AC/DC Power Adapter, p/n EA-AC or a dedicated 12-24 VDC
switching power supply

• Communications Cable (serial or Ethernet) – to connect the C-more Touch Panel to your
controller

1

Unpack and Inspect

Available Communication Ports

Install the Software and Develop a project

Additional Help and Support

• For product support, specifications, and installation troubleshooting, a Hardware User
Manual can be downloaded from the On-line Documentation area of the AutomationDirect
Web site

• For software programming help, refer to the C-more Programming Software on-line
embedded help.

• Refer to demos of the product at: http://c-more.automationdirect.com/software/software_
demo.html

• For additional technical support and questions, call our Technical Support team @
1-800-633-0405 or 770-844-4200.

Connect C-more Panel to Computer

Provide Power to C-more Panel

Access the C-more Panel Setup Screens

Connect the C-more Panel to a PLC

Inspect all equipment for completeness. If anything is missing or damaged,
immediately call the AutomationDirect® returns department @ 1-800-633-0405.

Note: Device is not available on Base Feature touch panel EA9-T7CL-R

Note: Device is only available on touch panels EA9-T12CL and EA9-T15CL.

USB Port - Type B

Programming

2

1

3

4

Pin Signal

1 N.C.

D–
D+
GND

2
3
4

ShieldShell

USB Port - Type A

USB Device Options

21

3

4

Pin Signal
1 Vbus

D–
D+
GND

2
3
4

ShieldSHELL

Ethernet 10/100 Base-T
PLC Communications,
Programming/Download

1 8

Pin Signal

1 TD+

TD–
RD+
do not use

2
3
4

Pin Signal

5 do not use

RD–
N.C.
N.C.

6
7
8

Network Speed LED (Yellow)

On 100M

10MOff

SD Card Slot 1

SD Card Slot 2

HDMI Port Video Out

Note: Device is not available on Base Feature touch panel EA9-T6CL-R

8 1

15 9

Port 1

PLC Serial Communications

RS-232C / RS-485

Pin Signal

1 Frame GND

TXD (232C)
RXD (232C)
VCC

(Supplies +5VDC)

2
3
4
5 Logic GND

Pin Signal Pin Signal

6 LE (for DH485)

CTS (232C)
RTS (232C)
RXD+ (422/485)

7
8
9

10 RXD– (422/485)

11 TXD+ (422/485)

TXD– (422/485)
Term. Resistor
N.C.

12
13
14
15 N.C.

1 6

Pin Signal

1 0V

N.C.
RXD
TXD

2
3
4

Supplies +5VDC5
0V6

Port 3

RJ12 Serial Communication

RS-232C

+
–
Logic Ground

Port 2

Serial Communication

RS-485

Link Status LED (Green)
On Ethernet Linked

No Ethernet Comm.Off
Comm. Activity

Blinking

Green

• Purchase the C-more programming software, EA9-PGMSW at
AutomationDirect.com. EA9-PGMSW is available on CD or by
download.

• Install EA9-PGMSW on your PC.

• Use the software to create a project.

• Download the project to the C-more panel from the software via
Ethernet or USB cable or on USB memory or SD card

Notes regarding Ethernet access to a C-more panel.
If you intend to take advantage of the methods of remote access to the panel, including the web server, PC
remote access, FTP, iPhone, iPad or Android app, you need to consider the security exposure in order to mini­mize the risks to your process and your C-more panel.

Security measures may include password protection, changing the ports exposed on your network, including a
VPN in your network, and other methods. Security should always be carefully evaluated for each installation.

Wire a dedicated 12-24 VDC power source to the DC connector on the rear
of the C-more touch panel, include wiring the ground terminal to a proper
equipment ground. The recommended power supply is AutomationDirect
p/n: PSC24-060

• or install a C-more AC/DC Power Adapter, p/n EA-AC, to the rear of the touch panel and
wire an AC voltage source of 100-240 VAC, 50/60 Hertz, to its AC connector

• then turn on the power source and check the LED status indicators on the front and rear of
the C-more touch panel for proper indication

Power Specifications

Model

Specification

EA9-T6CL-R EA9-T6CL EA9-T7CL-R EA9-T7CL EA9-T8CL EA9-T10CL EA9-T12CL EA9-T15CL

Power Consumption

16.0W

1.30A @ 12 VDC

0.66A @ 24 VDC

18.0W

1.50A @ 12 VDC

0.75A @ 24 VDC

18.0W

1.50A @ 12 VDC

0.75A @ 24 VDC

21.0W

1.75A @ 12 VDC

0.88A @ 24 VDC

29.0W

2.40A @ 12 VDC

1.20A @ 24 VDC

Internal Fuse
(non-replaceable)

4.0A 6.3A

CPU Status LED (Green, Orange & Red)

Off Power Off

Green Normal - CPU Run State

Red Memory Error

Blinking Red Watchdog Timer Error

Blinking Orange OS Error

Blinking Green Power Loss Detection

Power LED (Front of Panel)

Color On Off

Green Power On Power Error

• Access the Main Menu of the touch panel setup screens by pressing the extreme upper left
corner of the panel display area for three (3) seconds as shown below.

• Adjust the time and date for the panel by pressing the Setting button on the Main Menu,
then press the Adjust Clock button on the Setting screen.

• Use the right pointing arrows for the time or date display to select the unit to change.
Use the up and down arrows to increment or decrement the value for the selected unit.

• Press OK when done to accept the changes to the time and date that is retained in he
touch panel’s battery backed memory, or press Cancel to exit the Adjust Clock setup screen
without making any changes.

• Press the Main Menu button on the Setting screen and then the Exit button on the Main
Menu screen to return to the application screen.

DL06 PLC

H0-ECOM/H0-ECOMM100

Ethernet Module

Ethernet CAT5

Cable

Auto MDI / MDI-X

Ethernet Port

C-more

Touch Panel

Ethernet

• Connect the serial communications cable between the C-more touch panel and the PLC

• or connect the C-more touch panel and PLC together via an Ethernet switch and Ethernet
cables (full feature panels only)

• or use an Ethernet cable directly between the C-more Ethernet port and the PLC Ethernet
port (full feature panels only)

EA-2CBL-1

DL-06 PLC

C-more

Touch Panel

Port 2

Port 1

Serial

C-more Touch

Panel

USB-FLASH

USB Pen Drive

EA-AC

AC / DC Power Adapter

Install Optional Hardware Accessories

• Connect a USB Programming Cable, such as p/n USB-CBL-AB15, from a USB type A
port on the PC to the USB type B programming port on the C-more touch panel

• or connect the C-more touch panel and PC together either directly or via an Ethernet
switch, and CAT5 Ethernet cables (full feature panels only)

Ethernet CAT5

Cable

C-more

Touch Panel

Ethernet

Port

PC

Auto MDI / MDI-X

Ethernet Port

EA-SD-CARD

SD Card

Stride™

Ethernet Switch

10/100 Base-T

(such as SE-SW5U)

PC

C-more

Touch Panel

Ethernet

Port

Ethernet CAT5

Cable

Auto MDI / MDI-X

Ethernet Port

USB-CBL-ABxx

USB Cable

PC

C-more

Touch Panel

USB
Port

USB
Port

USB

Ethernet

via Switch

EA-AC Tightening Torque

Power supply cable torque 71 - 85 oz-in (0.5 - 0.6 Nm)

Power connector mounting torque 71 - 85 oz-in (0.5 - 0.6 Nm)

Mounting flange screw torque 57 - 71 oz-in (0.4 - 0.5 Nm)

12-24 VDC

+

–

GND
Equipment

Ground

Recommended DC Supply Fuse
Panel Size

6“ – 10”
12“ & 15”

2.5 A

4.0 A

MDL2-5
MDL4

Rating ADC p/n

Recommended AC Supply Fuse

3.0A time delay, ADC p/n: MDL3

L

N

G

100 - 240 VAC

50 / 60 Hz

AC Wiring

DC Wiring

Data Sheet: EA9-QSG Rev. D

C-more EA9 Series Touch Panels

NOTE: Use 60 / 75 °C copper conductors only,

12 - 24 AWG

EA-x-COV2

Screen

Protector

DC-CON Tightening Torque

Power connector screw torque 70.4 oz-in (0.5 Nm)

Power connector mounting torque 56 oz-in (0.4 Nm)

Use 60 / 75°C copper conductors only, 12 - 24 AWG

EA-COMCON-3A or

EA-COMCON-3

DSUB Port Adapter

Safety Information

WARNING: To minimize the risk of potential safety problems, you should follow
all applicable local and national codes that regulate the installation and operation
of your equipment. These codes vary from area to area and it is your responsibility to
determine which codes should be followed, and to verify that the equipment,
installation, and operation are in compliance with the latest revision of these codes.

Equipment damage or serious injury to personnel can result from the failure to follow
all applicable codes and standards. We do not guarantee the products described in this
publication are suitable for your particular application, nor do we assume any
responsibility for your product design, installation, or operation.

If you have any questions concerning the installation or operation of this
equipment, or if you need additional information, please call technical support at
1-800-633-0405 or 770-844-4200.
This publication is based on information available at the time it was printed. At
Automationdirect.com® we constantly strive to improve our products and services, so we
reserve the right to make changes to the products and/or publications at any time without
notice and without obligation. This publication may also discuss features that may not be
available in certain revisions of the product.

ADVERTISSEMENT: Afin de réduire au minimum le risque d’éventuels problèmes
de sécurité, vous devez respecter tous les codes locaux et nationaux applicables régissant
l’installation et le fonctionnement de votre équipement. Ces codes diffèrent d’une région
à l’autre et, habituellement, évoluent au fil du temps. Il vous incombe de déterminer les
codes à respecter et de vous assurer que l’équipement, l’installation et le fonctionnement
sont conformes aux exigences de la version la plus récente de ces codes.

L’omission de respecter la totalité des codes et des normes applicables peut entraîner des
dommages à l’équipement ou causer de graves blessures au personnel. Nous ne garantissons
pas que les produits décrits dans cette publication conviennent à votre application particulière
et nous n’assumons aucune responsabilité à l’égard de la conception, de l’installation ou du
fonctionnement de votre produit.

Si vous avez des questions au sujet de l’installation ou du fonctionnement de cet
équipement, ou encore si vous avez besoin de renseignements supplémentaires, n’hésitez
pas à nous téléphoner au 770-844-4200.
Cette publication s’appuie sur l’information qui était disponible au moment de l’impression.
À la société AutomationDirect, nous nous efforçons constamment d’améliorer nos produits
et services. C’est pourquoi nous nous réservons le droit d’apporter des modifications aux
produits ou aux publications en tout temps, sans préavis ni quelque obligation que ce soit.
La présente publication peut aussi porter sur des caractéristiques susceptibles de ne pas être
offertes dans certaines versions révisées du produit.

Before you begin...

3

DC power connector

C-more Panel

Mounting Clips

Quick Start

Guide

Gasket

Logo Label*

Cutout Template*

2

4

5

Ethernet

via Cable

6

DL06 PLC

Stride™
Ethernet Switch
10/100 Base-T

(such as SE-SW5U)

H0-ECOM/H0-ECOM100

Ethernet Module

Ethernet CAT5

Cable

C-more

Touch Panel

Auto MDI / MDI-X

Ethernet Port

Ethernet

via Switch

8

7

If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

*Not included with EA9-T7CL-R and EA9-T7CL.

Specifications

Model

Specification

6” TFT color w/

base features

6” TFT color w/

full features

7” TFT color w/

base features

7” TFT color w/

full features

8” TFT color w/

full features

10” TFT color w/

full features

12” TFT color w/

full features

15” TFT color w/

full features

Part Number

EA9-T6CL-R EA9-T6CL EA9-T7CL-R EA9-T7CL EA9-T8CL EA9-T10CL EA9-T12CL EA9-T15CL

Display Actual Size and
Type

5.7” TFT color 7.0” TFT color 8.4” TFT color 10.4” TFT color 12.1” TFT color 15.0” TFT color

Display Viewing Area

4.54” x 3.40”

[115.2 mm x 86.4 mm]

6.00” x 3.60”

[152.4 mm x 91.4 mm]

6.71” x 5.03”

[170.4 mm x 127.8 mm]

8.31” x 6.24”

[211.2 mm x 158.4 mm]

9.69” x 7.26”

[246.0 mm x 184.5 mm]

11.97” x 8.98”

[304.1 mm x 228.0 mm]

Weight

1.56 lb (710g) 1.59 lb (720g) 1.46 lb (660g) 1.48 lb (670g) 2.93 lb (1330g) 4.19 lb (1900g) 4.89 lb (2200g) 6.50 lb (2950g)

Display Resolution

320 x 240 (QVGA) 800 x 480 (WVGA) 800 x 600 (SVGA) 1024 x 768 (XGA)

Display Brightness

280 nits (typ) 350 nits (typ) 310 nits (typ) 280 nits (typ)

LCD Panel Dot Pitch

0.18 mm x 0.18 mm 0.19 mm x 0.19 mm 0.213 mm x 0.213 mm 0.264 mm x 0.264 mm 0.3075 mm x 0.3075 mm 0.297 mm x 0.297 mm

Color Scale

65,536 colors

Backlight Average
Lifetime*

50,000 hours @ 25 °C

Touch Panel Type

Four-wire analog resistive

Project Memory

26 MB 82 MB

Number of Screens

Up to 999 screens – limited by project memory

Realtime Clock

Realtime Clock Built into panel, backed up for 30 days at 25°C

Calendar ­Month / Day / Year

Yes - monthly deviation 60 sec (Reference)

Serial Port 1

15-pin D-sub female - RS232C, RS-422/485

Serial Port 2

N/A 3-wire terminal block - RS-485 N/A 3-wire terminal block - RS-485

Serial Port 3

N/A RJ-12 modular jack - RS-232C N/A RJ-12 modular jack - RS-232C

USB Port - Type B

USB 2.0 High speed (480 Mbps) Type B - Download/Program

USB Port - Type A

USB 2.0 High speed (480 Mbps) Type A -for USB device options

Ethernet Port

N/A Ethernet Port Ethernet 10/100 Base-T, auto MDI/MDI-X

Audio Line Out

N/A

3.5 mm mini jack – requires
amplifier and speaker(s)

N/A 3.5 mm mini jack – requires amplifier and speaker(s)

Mic In

N/A 3.5 mm mini jack N/A 3.5 mm mini jack

SD Card Slot

1 slot supports max 2 GB (SD,) max 32 GB (SDHC) 2 slots support max 2 GB (SD,) max 32 GB (SDHC)

HDMI Video Out

N/A Yes

Supply Power

10.2-26.4 VDC Class2 or SELV (Safety Extra-Low Voltage) Circuit or Limited Energy Circuit (LEC),

or use the AC/DC Power Adapter, EA-AC, to power the touch panel from a 100-240 VAC, 50/60 Hz power source. Reverse Polarity Protected

Power Consumption

16.0 W

1.30A @ 12 VDC

0.66A @ 24 VDC

18.0 W

1.50A @ 12 VDC

0.75A @ 24 VDC

18.0 W

1.50A @ 12 VDC

0.75A @ 24 VDC

21.0 W

1.75A @ 12 VDC

0.88A @ 24 VDC

29.0 W

2.40A @ 12 VDC

1.20A @ 24 VDC

Internal Fuse
(non-replaceable)

4.0A 6.3A

Altitude

Up to 2000m (6562 ft)

Operating Temperature

0 to 50 °C (32 to 122 °F); Maximum surrounding air temperature rating: 50 °C (122 °F)

IEC 60068-2-14 (Test Nb, Thermal Shock)

Storage Temperature

–20 to +60 °C (–4 to +140 °F)
IEC 60068-2-1 (Test Ab, Cold)

IEC 60068-2-2 (Test Bb, Dry Heat)

IEC 60068-2-14 (Test Na, Thermal Shock)

Humidity

5–95% RH (non-condensing)

Environment

For use in Pollution Degree 2 environment, no corrosive gases permitted

Noise Immunity

(EN61131-2)

EN61000-4-2 (ESD),

EN61000-4-3 (RFI)
EN61000-4-4 (FTB)

EN61000-4-5 (Serge)

EN61000-4-6 (Conducted)

EN61000-4-8 (Power frequency magnetic field immunity)

(Local Test)

RFI, (145MHz, 440Mhz 10W @ 10cm)

Impulse 1000V @ 1µs pulse

Withstand Voltage

1000 VAC, 1 min. (FG to Power supply )

Insulation Resistance

> 10M ohm @ 500V DC (FG to Power supply )

Vibration

IEC60068-2-6 (Test Fc)

Shock

IEC60068-2-27 (Test Ea)

Emission

EN55011 Class A (Radiated RF emission)

Enclosure

NEMA 250 type 4/4X indoor use only

UL50 type 4X indoor use only

IP-65 indoor use only

(When mounted correctly)

NEMA 250 type 4/4X indoor use only

UL50 type 4X indoor use only

IP-65 indoor use only (not tested by UL)

(When mounted correctly)

NEMA 250 type 4/4X indoor use only

UL50 type 4X indoor use only

IP-65 indoor use only

(When mounted correctly)

Agency Approvals

UL508, E157382**

CE (EN61131-2), RoHS (2011/65/EU)

CUL Canadian C22.2

UL61010, E157382

CE (EN61131-2), RoHS (2011/65/EU)

CUL Canadian C22.2

UL508, E157382

CE (EN61131-2), RoHS (2011/65/EU)

CUL Canadian C22.2

* NOTE: The backlight average lifetime is defined as the average usage time it takes before the brightness becomes 50% of the initial brightness. The lifetime of the backlight depends on the ambient temperature. The lifetime will decrease under

low or high temperature usage.

C-more Panel Dimensions

C-more Panel Mounting

Specifications

A

B

C

D

F

E

G

Optional

EA-AC

Optional
EA-AC

Panel Dimensions

Model

Number

A B C D E F G

EA9-T6CL-R

8.08

[205.2]

6.13

[155.8]

7.40

[188.0]

5.46

[138.7]

1.58

[40.1]

0.32
[8.1]

2.99

[75.9]

EA9-T6CL

8.08

[205.2]

6.13

[155.8]

7.40

[188.0]

5.46

[138.7]

1.58

[40.1]

0.32
[8.1]

2.99

[75.9]

EA9-T7CL-R

8.08

[205.2]

6.13

[155.8]

7.40

[188.0]

5.46

[138.7]

1.58

[40.1]

0.32
[8.1]

2.99

[75.9]

EA9-T7CL

8.08

[205.2]

6.13

[155.8]

7.40

[188.0]

5.46

[138.7]

1.58

[40.1]

0.32
[8.1]

2.99

[75.9]

EA9-T8CL

9.87

[250.7]

7.69

[195.4]

9.19

[233.4]

7.01

[178.1]

2.09

[53.1]

0.32
[8.1]

3.51

[89.2]

EA9-T10CL

12.52

[318.0]

9.53

[242.1]

11.84

[300.7]

8.84

[224.5]

1.93

[49.0]

0.32
[8.1]

3.35

[85.1]

EA9-T12CL

13.37

[339.6]

11.02
[280.0]

12.52

[318.0]

10.17

[258.3]

1.93

[49.0]

0.32
[8.1]

3.35

[85.1]

EA9-T15CL

15.75

[400.0]

12.09
[307.2]

14.88

[378.0]

11.20

[284.5]

1.93

[49.0]

0.32
[8.1]

3.35

[85.1]

Outer edge front bezel

Cutout

D

Cutout

EAB

J

J

Additional Installation Information

• Clearance – The mounting clearances when installing the touch panel in an enclosure or cabinet shall be minimum
of 4 inches from the top, bottom and sides and 1.72 inches from the rear.

• Derating – If EA9-T15CL is mounted off the vertical plane facing upward, the temperature shall be derated as shown
below. Other panels may be mounted at any angle without derating consideration.

Units: Inches [mm]

EA9-T6CL, EA9-T6CL-R,
EA9-T7CL, EA9-T7CL-R

and EA9-T8CL

(4 places)

Mounting Bracket

Locations

EA9-T10CL

(8 places)

EA9-T12CL

and EA9-T15CL

(8 places)

0°

15°

90°

Angle: 15° to 90°
Temp: 0 to 50 °C

Angle: 0° to 15°
Temp: 0 to 45 °C

Angle: 0° to -15°
Temp: 0 to 45 °C

Angle: -15° to -90°
Temp: 0 to 50 °C

EA9-T15CL

0°

45°

90°

Angle: 45° to 90°
Temp: 0 to 50 °C

Angle: 0° to 45°
Temp: 0 to 40 °C

0°

Angle: -45° to 90°
Temp: 0 to 50 °C

Angle: 0° to -45°
Temp: 0 to 40 °C

EA9-T15CL
with EA-AC

UL Satisfaction Ratings

Model Number Input Ratings

EA9-T6CL-R

12 - 24 VDC, Class 2, SELV or LEC, Maximum 16.0W

EA9-T6CL
EA9-T7CL-R
EA9-T7CL
EA9-T8CL

12 - 24 VDC, Class 2, SELV or LEC, Maximum 18.0W

EA9-T10CL
EA9-T12CL

12 - 24 VDC, Class 2, SELV or LEC, Maximum 21.0W

EA9-T15CL

12 - 24 VDC, Class 2, SELV or LEC, Maximum 29.0W

Terminal connecting wire size 12 - 24 AWG

Connecting torque 71 - 85 oz-in (5 - 7 lbf-in) (0.5 - 0.6 Nm)

Maximum surrounding air temperature rating, 50°C

For use in Pollution Degree 2 environment

All interface ports are intended to be directly connected to an isolated secondary circuit

For use on a flat surface of a type 4X Indoor Use Only enclosure

Cutout Dimensions

Model

Number

A B D E J

EA9-T6CL-R

8.08

[205.2]

6.13

[155.8]

7.46

[189.5]

5.51

[140.0]

0.31
[7.9]

EA9-T6CL

8.08

[205.2]

6.13

[155.8]

7.46

[189.5]

5.51

[140.0]

0.31
[7.9]

EA9-T7CL-R

8.08

[205.2]

6.13

[155.8]

7.46

[189.5]

5.51

[140.0]

0.31
[7.9]

EA9-T7CL

8.08

[205.2]

6.13

[155.8]

7.46

[189.5]

5.51

[140.0]

0.31
[7.9]

EA9-T8CL

9.87

[250.7]

7.69

[195.4]

9.25

[235.0]

7.07

[179.6]

0.31
[7.9]

EA9-T10CL

12.52

[318.0]

9.53

[242.1]

11.90

[302.3]

8.91

[226.3]

0.31
[7.9]

EA9-T12CL

13.37

[339.6]

11.02

[280.0]

12.57

[319.3]

10.22

[259.6]

0.40
[10.2]

EA9-T15CL

15.75

[400.0]

12.09

[307.2]

14.93

[379.2]

11.27

[286.3]

0.41
[10.4]

Units: Inches [mm]

NOTES: 1. The display screen should be cleaned periodically by wiping it with a lint free damp cloth using a mild soap solution. Use

a dry or slightly dampened cloth to wipe any dirt from the labels on the back of the panel. Dry all surfaces with a lint free
cloth. Do not clean with ammonia based products which are solvents and will damage the face of the panel and the labels

2. The touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an
unexpected object may be activated.

Touch

Panel Size

Enclosure

Thickness Range

Mounting Clip
Screw Torque

Material

6”, 7”, 8”, 10” and 12”

0.039 - 0.20 inch
[1 – 5 mm]

63 - 77 oz-in

[0.45 - 0.55 Nm]

Metal

15”

92 - 106 oz-in

[0.65 - 0.75 Nm]

**Hazardous Location Installation Requirements

Models EA9-T6CL-R and EA9-T6CL Only

Hazardous Location Installation Requirements

SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR
NONHAZARDOUS LOCATIONS ONLY.

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED
OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS
I, DIVISION 2.

DEVICES SHALL BE INSTALLED INTO AN ENCLOSURE THAT UTILIZES A TOOL
REMOVABLE DOOR/COVER.