Page 1
Global LCD Panel Exchange Center
Issued Date: Aug. 15, 2008
Model No.: V216B1-P01
www.panelook.com
Approval
TFT LCD Preliminary Specification
MODEL NO.: V216B1 – P01
Customer: __________________________
Approved by:_______________________________
Note:
Approved By
TV Head Division
LY Chen
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Reviewed By
Prepared By
LCD TV Marketing and Product Management Div.
QRA Dept. Product Development Div.
Tomy Chen WT Lin
WY Li Steven Tu
1
Version 2.0
www.panelook.com
Page 2
Global LCD Panel Exchange Center
Issued Date: Aug. 15, 2008
Model No.: V216B1-P01
www.panelook.com
Approval
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 CHARACTERISTICS
1.3 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE V216B1-L01)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
-------------------------------------------------------
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD OPEN CELL
-------------------------------------------------------
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
-------------------------------------------------------
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
8. DEFINITION OF LABELS
8.1 OPEN CELL LABEL
8.2 CARTON LABEL
----------------------------------------------
9. PACKING
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
-------------------------------------------------------
10. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
8.2 SAFETY PRECAUTIONS
-------------------------------------------------------
11. MECHANICAL DRAWING
-------------------------------------------------------
3
4
5
6
8
12
15
19
20
22
23
9
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Version Date
Ver 2.0 Aug. 15, ’08 All
Page
(New)
REVISION HISTORY
Section Description
All Approval Specification was first issued.
Approval
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V216B1- P01 is a 21.6-inch wide TFT LCD cell with driver ICs and a 30-pin 1-ch LVDS interface. The
product supports 1366 x 768 (16.9 wide screen) mode and displays up to 16.7 ( 6-bit+Hi-FRC colors) millions
colors. The backlight unit is not built in.
1.2 CHARACTERISTICS
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 21.6
Pixels [lines] 1366 x R.G.B. x 768
Active Area [mm] 477.417 (H) x 268.416 (V) (21.6” diagonal)
Sub -Pixel Pitch [mm] 0.1165 (H) x 0.3495 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] TYP. 606
Physical Size [mm] 488.917(W) x 279.916(H) x 2.0(D) Typ.
Display Mode TN / Normally White
Approval
Contrast Ratio 800:1 Typ.
(Typical value measured at CMO’s module: V216B1-L01)
Glass thickness (Array/CF) [mm] 0.7 / 0.7
Viewing Angle (CR>10) +85/-85(H),+80/-80(V) Typ.
(Typical value measured at CMO’s module: V216B1-L01)
Color Chromaticity R=(0.644, 0.331)
G=(0.273,0.588)
B=(0.151,0.061)
W=(0.285,0.293)
*Please refer to “color chromaticity” on p.15
(Typical value measured at CMO’s module: V216B1-L01)
Cell Transparency [и]
Polarizer (CF side) Anti-glare coating,
Polarizer (TFT side) 484.4(H) x 275.8(w)
7.38%Typ.s
(Typical value measured at CMO’s module: V216B1-L01)
484.4(H) x 275.8(w). Hardness: 3H
1.3 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight 606 g
I/F connector mounting
position
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
(2)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position
+/- 0.5mm
4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE V216B1-L01)
Item Symbol
Storage Temperature TST -20 +60 ºC (1), (3)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2), (3)
Altitude Operating A OP 0 5000 M (3)
Altitude Storage A ST 0 12000 M (3)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation..
Љ 40 ºC).
Relative Humidity (%RH)
100
90
80
Min. Max.
Value
Unit Note
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled
chamber. Thermal management should be considered in your product design to prevent the surface
temperature of display area from being over 65 ºC. The range of operating temperature may
60
40
20
10
Operating Range
Storage Range
Temperature (ºC)
8060-20 400 20-40
degrade in case of improper thermal management in your product design.
Note (3) The rating of environment is base on LCD module. Leave LCD cell alone, this environment condition can’t
be guaranteed. Except LCD cell, the customer has to consider the ability of other parts of LCD module
and LCD module process.
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
Storage Condition : With shipping package.
Storage temperature range : 25±5
Storage humidity range : 50±10%RH
Shelf life : a month
к
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
Item Symbol
Power Supply Voltage Vcc -0.3 6.0 V
Input Signal Voltage VIN -0.3 3.6 V
Min. Max.
Value
Unit Note
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD OPEN CELL
Parameter Symbol
Power Supply Voltage VCC 4.5 5.0 5.5 V (1)
Power Supply Ripple Voltage VRP - - 150 mV
Rush Current I
White - 0.50 - A
Power Supply Current
Differential Input High
LVDS
Interface
interface
Note (1) The module should be always operated within above ranges.
Threshold Voltage
Differential Input Low
Threshold Voltage
Common Input Voltage V
Terminating Resistor R
Input High Threshold Voltage VIH 2.7 - 3.3 V CMOS
Input Low Threshold Voltage V
Black - 0.85 0.95 A
Vertical Stripe
Ta = 25 ± 2 ºC
Value
Min. Typ. Max.
- - 3.0 A (2)
RUSH
ICC
- 0.75 - A
+100 - - mV
V
LVT H
- - -100 mV
V
LVTL
1.125 1.25 1.375 V
LVC
- 100 - ohm
T
0 - 0.7 V
IL
Unit Note
Approval
(3)
Note (2) Measurement Conditions:
6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
Vcc rising time is 470us
+5V
0.9Vcc
0.1Vcc
GND
470us
Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, fv = 60 Hz,
whereas a power dissipation check pattern below is displayed.
a. White Pattern
b. Black Pattern
Active Area
Active Area
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
c. Vertical Stripe Pattern
Active Area
R
G
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
RX0(+/-)
RX1(+/-)
RX2(+/-)
RX3(+/-)
RXCLK(+/-)
SELLVDS
(P-TWO,196108-30041)
INPUT CONNECTOR
Vcc
GND
V/L
Inverter (W/O)
TIMING
CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
SCAN DRIVER IC
TFT LCD PANEL
(1366x3x768)
DATA DRIVER IC
BACKLIGHT UNIT
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin No. Symbol Description Note
1 NC No Connection (2)
2 NC No Connection (2)
3 NC No Connection (2)
4 GND Ground
5 RX0- Negative transmission data of pixel 0
6 RX0+ Positive transmission data of pixel 0
7 GND Ground
8 RX1- Negative transmission data of pixel 1
9 RX1+ Positive transmission data of pixel 1
10 GND Ground
11 RX2- Negative transmission data of pixel 2
12 RX2+ Positive transmission data of pixel 2
13 GND Ground
14 RXCLK- Negative of clock
15 RXCLK+ Positive of clock
16 GND Ground
17 RX3- Negative transmission data of pixel 3
18 RX3+ Positive transmission data of pixel 3
19 GND Ground
20 NC No Connection (2)
21 SELLVDS Select LVDS data format (3)
22 NC No Connection (2)
23 GND Ground
24 GND Ground
25 GND Ground
26 VCC Power supply: +5V
27 VCC Power supply: +5V
28 VCC Power supply: +5V
29 VCC Power supply: +5V
30 VCC Power supply: +5V
Note (1) Connector part no.: P-TWO 196108-30041 (1.0mm FFC) or compatible
Approval
Note (2) Reserved for CMO internal use, please leave it open
Note (3) Low: JEIDA data format. High/open: VESA data format.
Note (4) Logic level voltage definition: Low: 0V, High: 3.3V
9
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
5.2 LVDS DATA MAPPING TABLE
SELLVDS = H or Open (VESA)
SELLVDS = L (JEIDA)
Approval
R0~R7: Pixel R Data (7; MSB, 0; LSB)
G0~G7: Pixel G Data (7; MSB, 0; LSB)
B0~B7: Pixel B Data (7; MSB, 0; LSB)
DE : Data enable signal
Notes(1) RSVD(reserved)pins on the transmitter shall be “H” or “L”
10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 11
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the
color. The higher the binary input, the brighter the color. The table below provides the assignment of color
versus data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
0
0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
Green(0) / Dark
Green(1)
Green(2)
:
:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
1
1
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
1
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
1
0
1
1
1
0
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
0
0
0
0
1
1
1
1
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
1
1
0
0
1
1
1
1
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
1
1
0
:
:
0
1
1
0
1
1
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
1
0
0
1
:
:
:
:
1
0
0
1
1
1
11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 12
Global LCD Panel Exchange Center
p
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency 1/Tc 60 76 82 MH
In
LVDS Receiver Clock
LVDS Receiver Data
Vertical Active Display Term
Horizontal Active Display Term
Note (1) Since this module is operated in DE only mode, Hsync and Vsync input signals should be set to low
ut cycle to
cycle Jitter
Setup Time Tlvsu 600 - - ps
Hold Time Tlvhd 600 - - ps
Frame Rate
Total Tv 778 806 888 Th Tv=Tvd+Tvb
Display Tvd 768 768 768 Th Blank Tvb 10 38 120 Th Total Th 1442 1560 1936 Tc Th=Thd+Thb
Display Thd 1366 1366 1366 Tc Blank Thb 76 194 570 Tc -
Trcl
Fr
-
47 50 53
57 60 63
-
200 ps
Z
Hz
Approval
logic level. Otherwise, this module would operate abnormally.
(2) Please refer to 5.1 for detail information.
INPUT SIGNAL TIMING DIAGRAM
DE
DCLK
T
h
Tvd
Tv
Tvb
Thd
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DE
DATA
Valid display data (1366 clocks)
12
Version 2.0
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
RXCLK+/-
RXn+/-
Tlvsu
Tlvhd
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
Approval
1T
14
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the
diagram below.
0.5
ЉЉЉЉ
0
ЉЉЉЉ
ЉЉЉЉ
0
1s
T
1
ЉЉЉЉ
10ms
T
2
ЉЉЉЉ
50ms
T
3
ЉЉЉЉ
50ms
ЉЉЉЉ
T4
LVDS Signals
0
ЉЉЉЉ
T
7
ЉЉЉЉ
ЉЉЉЉ
T2
T
8
ЉЉЉЉ
T3
0
Option Signals
(SELLVDS)
0V
0V
0.1V
Power On
CC
T7
cc
0.1V
3
T1
T
2
T
T4
VALI D
Power Off
8
T
Backlight (Recommended)
ЉЉЉЉ
500ms
100ms
T5
ЉЉЉЉ
T
6
50%
5
T
50%
T
6
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance. If
T2<0,that maybe cause electrical overstress failure.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Power ON/OFF Sequence
14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 15
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta 25Ć2
Ambient Humidity Ha 50Ć10 %RH
Supply Voltage VCC 5.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS”
Inverter Current IL 7.0 mA
Inverter Driving Frequency FL 50 KHz
Dimming Frequency FB 160 (type) Hz
Minimum Duty Ratio D
Maximum Duty Ratio D
Inverter Ampower (27-D024817)
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown as below. The following items should
o
C
20 %
MIN
100 %
MAX
be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 600 800 - (2)
TR 1.3 2.2
Response Time
T
3.7 5.8
F
Center Luminance of White L
White Variation
Cross Talk CT 4 % (5)
Red
Green
Color
Chromaticity
Blue
C
δW
=0°, θY =0°
θ
x
Rx 0.644 -
Ry 0.331 -
Gx 0.273 -
Gy 0.588 -
Bx 0.151 -
Viewing Angle at
Normal Direction
With CMO’s
module:
V216B1-L01
By 0.061 -
300 400 (4)
1.3 - (7)
Typ.
-0.03
Typ.
+0.03
ms (3)
(0),(6)
Wx 0.285 -
White
Wy
Color Gamut CG
0.293
68 72 %
-
NTSC
Ratio
75 85
75 85
Deg. (1)
70 80
70 80
Viewing
Angle
Horizontal
Vertical
θx+
θ
x
θY+
θ
Y
-
With CMO’s
module:
CR≥10
-
V216B1-L01
15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 16
Global LCD Panel Exchange Center
T
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Note (0) Light source is the standard light source ”C” which is defined by CIE and driving voltage are based on
suitable gamma voltages. The calculating method is as following :
1. Measure Module’s and BLU’s spectrum. White is without signal input and R,G,B are with signal input.
BLU (for V216B1-L01) is supplied by CMO.
2. Calculate cell’s spectrum.
Calculate cell’s chromaticity by using the spectrum of standard light source “C”.
Note (1) Definition of Viewing Angle (θx, θy):
Viewing angles are measured by EZ-Contrast 160R (Eldim)
Normal
θx = θy = 0º
θX- = 90º
x-
θy- θy+
θx−
θx+
y+
12 o’clock direction
θ
y+
= 90º
Approval
6 o’clock
θ
y-
= 90º
y-
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5),
CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7).
Note (3) Definition of Response Time (T
Gray Level 255
100%
90%
, TF):
R
x+
θX+ = 90º
Gray Level 255
Optical
Response
Gray Level 0
10%
0%
16
TR
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
T
F
ime
Version 2.0
www.panelook.com
Page 17
Global LCD Panel Exchange Center
(
)
(
)
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point and 5 points
LC = L (5)
L (X) is corresponding to the luminance of the point X at the figure in Note (7).
Note (5) Definition of Cross Talk (CT):
CT = | Y
– YA | / YA × 100 (%)
B
Where:
Y
= Luminance of measured location without gray level 0 pattern (cd/m2)
A
= Luminance of measured location with gray level 0 pattern (cd/m2)
Y
B
(0, 0)
Active Area
Y
(D/8,W/2)
A, L
Gray 128
Y
(D/2,7W/8)
A, D
Y
Y
D,W
A, U
A, R
(D/2,W /8)
(7D/8,W/2)
(D/4,W/4)
(D/8,W/2)
Y
B, L
Y
(D/2,7W/8)
B, D
0, 0
Active Area
Gray 0
Gray 128
Y
B, U
Y
B, R
(3D/4,3W/4)
(D,W)
Approval
(D/2,W /8)
(7D/8,W/2)
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed
after lighting Backlight for 1 hour in a windless room.
LCD Module
LCD Panel
Center of the Screen
Display Color Analyzer
(Minolta CA210)
Light Shield Room
(Ambient Luminance < 2 lux)
Note (7) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 18
Global LCD Panel Exchange Center
4
4
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
W
W/
W/2
3W /
Vertical Line
Horizontal Line
D
D/4 D/2 3D/4
12
: Test Point
5
34
Active Area
X
X=1 to 5
18
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
8. DEFINITION OF LABELS
8.1 OPEN CELL LABEL
The barcode nameplate is pasted on each open cell as illustration for CMO internal control.
-
XXXXXXXXXXXX
8.2 CARTON LABEL
The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation
P.O. NO.
Approval
Parts ID.
Carton ID.
XXXXXXXXXXXXXX
Quantities 30
Made in XXXX
(a) Model Name: V216B1-P01
(b) Carton ID: CMO internal control
(c) Quantities: 30
(d) Production Location:XXXX, for example:TAIWAN or CHINA .
19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
9. Packing
9.1 PACKING SPECIFICATIONS
(1) 30 LCD TV Panels / 1 Box
(2) Box dimensions : 640 (L) X490 (W) X 375 (H)
(3) Weight : approximately 26 Kg
9.2 PACKING METHOD
LCD Panel
The design packing top layer for empty tra y
Approval
LCD Panel
Carton
Carton Label
Figure.9-1 Packing Method
20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Sea & Land Transportation
(L800mm,t=3mm)
Film
(L1300*W1000*H140mm)
Gross:525kg
PE Sheet
PP Belt
Carton Label
(L1650mm,t=3mm)
Air Transportation
(L800mm,t=3mm)
Film
(L1300*W1000*H140mm)
Gross:320kg
PE Sheet
Carton Label
(L1650mm,t=3mm)
PP Belt
Approval
Figure.9-2 Packing Method
21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the product during assembly.
(2) To assemble backlight or install module into user’s system can be only in clean working areas. The dust
and oil may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel will be damaged.
(4) Always follow the correct power sequence when the product is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the
product when it is operating.
(8) High temperature or humidity may reduce the performance of module. Please store this product within
the specified storage conditions.
(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
10.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case
of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the product’s end of life, it is not harmful in case of normal operation and storage.
22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
11. Mechanical Drawing
Approval
ڻႝηިҽԖϦљ
CHI MEI
23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Page 24
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 15, 2008
Model No.: V216B1 – P01
Approval
24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Loading...