CMO V216B1-LN1 Specification

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

TFT LCD Preliminary Specification

MODEL NO.: V216B1- LN1

Preliminary

LCD TV Head Division

AVP

QRA Dept.

DDIII DDII DDI

Approval Approval Approval Approval

TVHD / PDD

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Product Manager

LCD TV Marketing and Product Management Division

1

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

1. GENERAL SPECIFICATIONS

1.1 OVERVIEW

The V216B1-LN1 model is a 21.6 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a 55-pin

1-path RSDS interface. This module supports 1366 x 768 (16:9 wide screen) mode and displays up to 16.7

millions colors. The inverter module for the Backlight Unit is not built in.

1.2 FEATURES

- Excellent Brightness 400nits

- Contrast Ratio 800:1

- Fast Response Time (5ms)

- Color Saturation NTSC 72%

- WXGA (1366 x 768 pixels) Resolution

- DE (Data Enable) Only Mode

- RSDS (Reduced Swing Differential Signaling) Interface

- Viewing Angle: 170(H)/160(V) (CR>10) TN Technology

- Color Reproduction (Nature Color)

1.3 GENERAL

Item Specification Unit Note
Active Area 477.417 (H) x 268.416 (V) (21.6” diagonal) mm
Bezel Opening Area 481.5 (H) x 272.5 (V) mm
Driver Element a-si TFT active matrix -
Pixel Number 1366 x R.G.B. x 768 pixel
Pixel Pitch (Sub Pixel) 0.1165 (H) x 0.3495 (V) mm
Pixel Arrangement RGB vertical stripe -
Display Colors 16.7 millions color
Display Operation Mode Transmissive mode / Normally White -
Surface Treatment Hard coating (3H), AG (Haze 25%) -

1.4 MECHANICAL

Item Min. Typ. Max. Unit Note

Horizontal(H) 500.3 501 501.7 mm

Module Size

Vertical(V) 296.4 297 297.6 mm
Depth(D) 16.8 17.3 17.8 mm To PCB cover

Weight Na 2300 Na g

2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item

Storage Temperature

Operating Ambient Temperature T

Shock (Non-Operating)

Vibration (Non-Operating)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90% RH Max. (Ta

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

Љʳ 40 ºC).

Symbol

T

ST

OP

S

NOP

V

NOP

Preliminary

Value

Min.

-20 +60 ºC (1)

0 +50 ºC (1), (2)

- 50 G (3), (5)

- 1.0 G (4), (5)

Max.

Unit

Note

Thermal management should be considered in final product design to prevent the surface temperature

of display area from being over 65 ºC. The range of operating temperature may degrade in case of

improper thermal management in final product design.

Note (3) 11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so

that the module would not be twisted or bent by the fixture.

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

10

Storage Range

Temperature (ºC)

3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8060-20 400 20-40

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

2.2 TFT LCD MODULE

Item Symbol

Min. Max.

VAA -0.3 14.0 V

Power Supply Voltage

VGH -0.3 30.0 V

VGL -10.0 -0.3 V

Input Signal Voltage VIN -0.3 3.6 V

Value

2.3 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VW

Te st

Condition

Ta = 25

Min. Type Max. Unit Note

к Ё Ё

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

Parameter Symbol

Power Supply Voltage

Power Supply Current

CMOS
interface

Note (1) IAA value is maximum at black pattern

Input High Threshold Voltage VIH 2.7 - 3.3 V
Input Low Threshold Voltage V

Ta = 25 ± 2 ºC

Min. Typ. Max.

VGH 22 23 24 V

VGL -6.0 -5.5 -5.0 V
VAA 12 12.25 12.5 V

V

DD

3.2 3.3 3.4 V

IGH - 10 - mA

IGL - 3 - mA
IAA - 190 250 mA

I

VDD

- 110 - mA

0 - 0.7 V

IL

Value

Preliminary

Unit Note

3000 V

RMS

Unit Note

Note (2) The module should be always operated within above ranges.

3.2 RSDS CHARACTERISTICS

Item

RSDS high input Voltage

RSDS low input Voltage

RSDS common mode

input voltage range

RSDS Input leakage

current

Note (1) V

Note (2) V

Note (3) V

= (VCLKP + VCLKN)/2 or V

CMRSDS

DIFFRSDS

CMRSDS

= VCLKP - VCLKN or V

= 1.2V(VDDD = 3.3V)

Symbol Condition

V

DIFFRSDSVCMRSDS

V

DIFFRSDSVCMRSDS

V

CMRSDSVDIFFRSDS

I

DxxP, DxxN ,CLKO ,CLPN

DL

CMRSDS

DIFFRSDS

Ta = -10~+85 ºC

Min Typ Max

= +1.2 V (1) 100 200 -

= +1.2 V (1) - -200 -100

= 200mV (2) VSSD+0.1 Note(3) VDDD-1.2

= (VDXXP + VDXXN)/2

= VDXXP - VDXXN

Value

Unit

mV

mV

-10 - 10

ӴA

V

4

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

3.3 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

Parameter Symbol

Lamp Voltage VW

Lamp Current IL

Lamp Turn On Voltage Vs

Operating Frequency FL

Lamp Life Time LBL

Note (1) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight, such

as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the

lamp. All the parameters of an inverter should be carefully designed to avoid producing too much

current leakage from high voltage output of the inverter. When designing or ordering the inverter

please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter

Min. Typ. Max.

- 810 -

6.5 7.0 7.5

1250

1450

40 80

50000

Value

Ta = 25 ± 2 ºC)

Unit Note

V

RMS

mA

RMS

V

RMS

V

RMS

KHz (3)

Hrs (4)

I

(2), Ta = 25 ºC

(2), Ta = 0 ºC

= 7.0mA

L

(miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be

operated in the same manners when it is installed in your instrument.

Note (2) The lamp starting voltage V

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the

display input signals, and it may result in line flow on the display. In order to avoid interference, the

lamp frequency should be detached from the horizontal synchronous frequency and its harmonics

as far as possible.

Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value

and the effective discharge length is longer than 80% of its original length (Effective discharge

length is defined as an area that has equal to or more than 70% brightness compared to the

brightness at the center point of lamp.) as the time in which it continues to operate under the

condition at Ta = 25

2к and I

should be applied to the lamp for more than 1 second after startup.

S

= 7.0 mArms.

L

5

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

TFT LCD PANEL

(1366x3x768)

X BOARD

RSDS SIGNAL INPUT

Connector Part No.: STARCONN 089H55-000000-G2-C or compatible

Preliminary

Figure.4-1 TFT LCD module block diagram

6

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

Pin No. Symbol Description Pin No. Symbol Description

1 GND Ground 29 GM8 Gamma voltage 8
2 B2P RSDS data signal (Blue 2) 30 GM7 Gamma voltage 7
3 B2N RSDS data signal (Blue 2) 31 GM6 Gamma voltage 6
4 B1P RSDS data signal (Blue 1) 32 GM5 Gamma voltage 5
5 B1N RSDS data signal (Blue 1) 33 GM4 Gamma voltage 4
6 B0P RSDS data signal (Blue 0) 34 GM3 Gamma voltage 3
7 B0N RSDS data signal (Blue 0) 35 GM2 Gamma voltage 2

8 G2P RSDS data signal (Green 2) 36 GM1 Gamma voltage 1 (highest)

9 G2N RSDS data signal (Green 2) 37 GND Ground
10 G1P RSDS data signal (Green 1) 38 VDD Driver IC logic power supply
11 G1N RSDS data signal (Green 1) 39 VDD Driver IC logic power supply
12 G0P RSDS data signal (Green 0) 40 VAA Source IC analog power supply
13 G0N RSDS data signal (Green 0) 41 VAA Source IC analog power supply
14 CLKP RSDS clock 42 VAA Source IC analog power supply
15 CLKN RSDS clock 43 TP1 Source IC data latch
16 R2P RSDS data signal (Red 2) 44 POL Source IC output polarity
17 R2N RSDS data signal (Red 2) 45 STH Horizontal start pulse
18 R1P RSDS data signal (Red 1) 46 NC No connection
19 R1N RSDS data signal (Red 1) 47 NC No connection

20 R0P RSDS data signal (Red 0) 48 STV Vertical start pulse

21 R0N RSDS data signal (Red 0) 49 CKV Gate IC clock

22 GND Ground 50 OE Gate IC output enable
23 GM14 Gamma voltage 14 (lowest) 51 /XAO Force Gate IC output to Vgh level
24 GM13 Gamma voltage 13 52 VGL Gate IC power supply
25 GM12 Gamma voltage 12 53 GND Ground
26 GM11 Gamma voltage 11 54 VGH Gate IC power supply
27 GM10 Gamma voltage 10 55 GND Ground
28 GM9 Gamma voltage 9

Note (1) Connector part no.: STARCONN 089H55-000000-G2-C (0.5mm FFC) or compatible

7

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

5.2 BACKLIGHT UNIT

Preliminary

Figure 5.-1 Backlight unit

8

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Data Signal

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Black

Red

Green

Basic

Colors

Gray

Scale

Of

Red

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

:

Red(61)

Red(62)

Red(63)

Green(0) / Dark

Green(1)

Green(2)

:

:

Green(61)

Green(62)

Green(63)

Blue(0) / Dark

Blue(1)

Blue(2)

:

:

Blue(61)

Blue(62)

Blue(63)

0

1

0

0

0

1

1

1

0

0

0

:

:

1

1

1

0

0

0

:

:

0

0

0

0

0

0

:

:

0

0

0

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

1

1

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

1

1

0

0

0

0

0

0

1

1

1

1

1

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

1

0

1

1

1

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

0

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

1

1

1

1

1

1

1

1

1

1

1

0

0

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

0

0

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

1

0

0

1

:

:

:

:

1

0

0

1

1

1

9

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

(a) Timing Spec

Parameter Symbol Condition

Clock pulse width t

Clock pulse low period t

Clock pulse high period t

Data setup time t

Data hold time t

CLK

CLK(L)

CLK(H)

SETUP1

HOLD1

HD

Start pulse setup time t

Start pulse hold time t

TP1 high period t

Last data CLK to TP1 high t

SETUP2

HOLD2

TP1(H)

LAST

Preliminary

Spec

Unit

Min. Typ. Max.

- 12.5 - - ns

- 5 - - ns

- 5 - - ns

- 4 - - ns

- 1.5 - - ns

- 2.3 - - ns

- 2 - - ns

- 15 - - CLKP

- 1 - - CLKP

VD

TP1 high to STH high t

POL to TP1 setup time t

TP1 to POL hold time t

CKV period

CKV pulse width

OE pulse width

Data setup time

Data hold time

CKV to output delay time

OE to output delay time

NEXT

- 6 - - CLKP

POL-TP1

POL toggle to TP1 rising 3 - - ns

TP1-POL

TP1 falling to POL toggle 2 - - ns

CKV

!

t

CKVH, tCKVL

t

WOE

!

t

t

SU

!

t

HD

!

PD1

!

t

PD3

!

t

!

50% duty cycle 2.5 -

- 5 -

- 1 -

- 0.7 -

- 0.7 -

CL=300pF - - 1

CL=300pF - - 0.8

Ӵ

Ӵ

Ӵ

Ӵ

Ӵ

Ӵ

Ӵ

s

s

s

s

s

s

s

10

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

y)

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

(b) Horizontal Timing Chart

CLKP-CLKN

(RSDS)

**P – **N

(RSDS)

STH

(input)

**P – **N

(RSDS)

LAST-2

Even Odd Even

CLKP-CLKN

(RSDS)

-

(output)

t

t

PLH1

CLK

t

SETUP2

t

CLK(L)tCLK(H)

t

HOLD2

LAST-1

Odd

t

PHL1

LAST

Even

t

SETUP1

Odd

t

HOLD1

t

SETUP1

Invalid Data

t

HOLD1

Preliminary

50%

50%

50%

80%

STH

(input)

TP1

(input)

POL

(input)

OUT

(+ → - polarity)

OUT

(- → + polarity)

RPO1/2

(+ → - polarity)

RPO1/2

(- → + polarity)

t

t

POL-TP1

LAST

t

NEXT

t

TP1(H)

Hi-Z

80%

80%

20%

t

TP1- POL

80%
20%

t

PD1 (target voltage 0.1VDDA)

t

PD2 (6-bit accuracy)

t

PD3 (target voltage  0.1VDDA)

t

PD4 (6-bit accurac

11

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

(c) Vertical Timing Chart

Preliminary

12

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

Power Supply

V

0.5

ЉЉЉЉ

0

0

1s

Signals

ЉЉЉЉ

ЉЉЉЉ

CC

T

1

ЉЉЉЉ

10ms

T

2

ЉЉЉЉ

50ms

T

3

ЉЉЉЉ

50ms

ЉЉЉЉ

T4

0V

0V

0.9 V

0.1V

CC

Power On

CC

CC

0.9 V

0.1Vcc

3

T1

T

2

T

T4

VALI D

Power Off

Backlight (Recommended)

ЉЉЉЉ

ЉЉЉЉ

T5

T

6

500ms

100ms

50%

5

T

Power ON/OFF Sequence

Figure.6-1 Power ON/OFF Sequence

50%

T

6

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

abnormal screen.

Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance.

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

13

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

7. OPTICAL CHARACTERISTICS

7.1 OPTICAL CHARACTERISTICS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 600 800 - (2)

Response Time

Center Luminance of White L

White Variation

Cross Talk CT 4 % (5)

Red

Green

Color
Chromaticity

Blue

TR

T

F

C

δW

=0°, θY =0°

θ

Rx (0.644) -

Ry (0.331) -

Gx (0.273) -

Gy (0.588) -

x

Viewing Angle at

Normal Direction

Bx (0.151) -

1.3 2.2

3.7 5.8

300 400 (4)

1.3 - (7)

Typ.

-0.03

Typ.

+0.03

By (0.061) -

Preliminary

ms (3)

(6)

White

Color Gamut CG

Horizontal
Viewing
Angle

Vertical

Note (1) Definition of Viewing Angle (θx, θy):

Viewing angles are measured by EZ-Contrast 160R (Eldim)

θX- = 90º

x-

Wx (0.285) -

Wy

θx+

θ

x

θY+

θ

Y

68 72 %

75 85

-

75 85

CR≥10

70 80

-

70 80

(0.293)

-

NTSC

Ratio

Deg. (1)

Normal

θx = θy = 0º

θy- θy+

12 o’clock direction

y+

θ

y+

θx−

= 90º

θx+

6 o’clock

θ

y-

= 90º

y-

x+

θX+ = 90º

14

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

(

)

(

)

(

)

T

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5),

CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7).

Note (3) Definition of Response Time (T

Gray Level 255

100%

90%

, TF):

R

Gray Level 255

Preliminary

Optical

Response

10%

0%

TR

Note (4) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point and 5 points

LC = L (5)

L (X) is corresponding to the luminance of the point X at the figure in Note (7).

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA × 100 (%)

B

Where:

Y

= Luminance of measured location without gray level 0 pattern (cd/m2)

A

= Luminance of measured location with gray level 0 pattern (cd/m2)

Y

B

(0, 0)

Active Area

Y

(D/8,W/2)

A, L

Gray 128

Y

(D/2,7W /8)

A, D

Y

Y

D,W

A, U

A, R

Gray Level 0

):

C

(D/2,W /8)

(7D/8,W/2)

(D/4,W/4)

(D/8,W/2)

Y

B, L

Y

(D/2,7W /8)

B, D

T

0, 0

F

Active Area

Gray 0

ime

Gray 128

Y

(D/2,W /8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

D,W

15

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be

executed after lighting Backlight for 1 hour in a windless room.

LCD Module

LCD Panel

Center of the Screen

Display Color Analyzer

(Minolta CA210)

Light Shield Room

(Ambient Luminance < 2 lux)

Preliminary

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

W

W/4

W/2

3W /4

Vertical Line

Horizontal Line

D

D/4 D/2 3D/4

12

5

34

X

: Test Point

X=1 to 5

Active Area

16

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

7.2 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta

Ambient Humidity Ha

Supply Voltage VCC 5.0 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS”

Inverter Current IL 7.0 mA

Inverter Driving Frequency FL 50 KHz

Inverter Ampower (27-D024817)

o

25

50

Ć2

Ć10

C

%RH

17

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

8. DEFINITION OF LABELS

8.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

CHI MEI

OPTOELECTRONICS

(a) Model Name: V216B1-LN1

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) Serial ID: X X

V216B1 -LN1 Rev. XX

X X X X X X X Y M D L N N N N

X X X X X Y M D L N N N N

Serial No.

Product Line

RoHS

(d) Production Location:XXXX, for example:TAIWAN or CHINA .

Serial ID includes the information as below:

(a) Manufactured Date: Year: 0~9, for 2000~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: Cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

st

to 31st, exclude I ,O, and U.

Year, Month, Date

CMO Internal Use

CMO Internal Use

Revision

CMO Internal Use

18

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

9. PACKAGING

9.1 PACKING SPECIFICATIONS

(1) 10 LCD TV modules / 1 Box

(2) Box dimensions : 563(L) X 408 (W) X 530 (H)

(3) Weight : approximately25Kg (10 modules per box)

9.2 PACKING METHOD

LCD TV Module

Anti-Static Bag

PE Foam(Bottom)

Drier

Preliminary

Carton

Figure.8-1 packing method

Carton Label

19

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

m

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Sea / Land Transportation

(40ft HQ Container)

Pallet Stack:L840*W1150*H2530mm

Gross:630kg

(L625mm,t=3mm)

Film

PE Sheet

Preliminary

Sea / Land Transportation

(40ft Container)

Pallet Stack:L840*W1150*H2155mm

Gross:530kg

(L625mm,t=3mm)

Film

PE Sheet

(L1130mm,t=5mm)

Gross:315kg

(L625mm,t=3mm)

Film

PP Belt

Carton Label

(L1150*W840*H140mm)

Air Transportation

Pallet Stack:L840*W1150*H1265

PE Sheet

(L1130mm,t=5mm)

Carton Label

PP Belt

(L1150*W840*H140mm)

(L1130mm,t=5mm)

Carton Label

(L1150*W840*H140mm)

PP Belt

Figure.8-2 packing method

20

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) It is recommended to assemble or to install a module into the user’s system in clean working areas.

The dust and oil may cause electrical short or worsen the polarizer.

(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and backlight.

(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

(5) Do not plug in or pull out the I/F connector while the module is in operation.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.

(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD

modules in the specified storage conditions.

(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of a backlight is over 1000 Volts. It may cause an electrical shock while assembling

with the inverter. Do not disassemble the module or insert anything into the backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

(1) UL60950-1 or updated standard.

(2) IEC60950-1 or updated standard.

(3) UL60065 or updated standard.

(4) IEC60065 or updated standard.

21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

11. MECHANICAL CHARACTERISTIC

Preliminary

ڻႝηިҽԖϦљ

CHI MEI

22

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: April. 22, 2008

Model No.: V216B1 - LN1

Preliminary

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

23

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1. 0

www.panelook.com