CMO V201V1-T03 Specification

Global LCD Panel Exchange Center

TFT LCD Approval Specification

MODEL NO.: V201V1-T03

Customer:

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Approved by:

Note:

TV Head Division

Approved By

LY Chen

Reviewed By

QRA Dept. Product Development Div.

Tomy Chen WT Lin

Prepared By

LCD TV Marketing and Product Management Div.

Ken Wu Sabrina Lee

1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING

8.1 PACKING SPECIFICATIONS

8.1 PACKING METHOD

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL CHARACTERISTICS

-------------------------------------------------------

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

3

4

5

7

11

12

14

17

21

23

24

25

2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

REVISION HISTORY

Version Date

Ver 2.0

Ver 2.1 Ver 2.2

Aug.08, 2005

Mar.06, 2006 Jan.22, 2007

Page

(New)

All

P24

P8

Section Description

All

11

3.2

Approval Specification was first issued.

Mechanical Characteristic: Update the location of the pin1. Modify CCFL (Cold Cathode Fluorescent Lamp) Characteristics

3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V201V1- T03 is a 20.1” TFT Liquid Crystal Display module with 6-CCFL Backlight unit and 1ch-TTL

interface. This module supports 640 x 480 VGA format and can display true 0.26M colors (6-bit/color).

1.2 FEATURES

- High brightness (500 nits)

- High contrast ratio (600:1)

- Fast response time (8ms)

- High color saturation NTSC 75%

- VGA (640 x 480 pixels) resolution

- DE (Data Enable) only mode

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

- TTL interface

- Power consumption is under 40 W

- RoHS Compliance

1.3 APPLICATION

- Home TV

- Public Display Application

- Terminal Display for Video application

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 408 (H) x 306 (V) (20.1” diagonal) mm Bezel Opening Area 412 (H) x 310 (V) mm Driver Element a-si TFT active matrix - Pixel Number 640 x R.G.B. x 480 pixel Pixel Pitch(Sub Pixel) 0.2125 (H) x 0.6375 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 0.26M color Display Operation Mode Transmissive mode / Normally white - Surface Treatment Anti-glare coating - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 447.9 448.6 449.3 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 338.9 339.6 340.3 mm Depth(D) 22.6 23.6 24.6 mm

Weight 3050 3150 3250 g -

(1)

4

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Value

Min. Max.

- 50 G (3), (5)

NOP

- 1.0 G (4), (5)

NOP

Unit Note

(a) 90 %RH Max. (Ta

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel display area surface should be 0 ºC Min. and 60 ºC Max.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 500 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that

the module would not be twisted or bent by the fixture.

Љ

40 ºC).

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

10

Storage Range

Temperature (ºC)

5

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8060-20 400 20-40

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6.0 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 3000 Lamp Current IL - 7.0 Lamp Frequency FL 20 80

3. ELECTRICAL CHARACTERISTICS

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Unit Note

V

MA

KHz

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

RMS

3.1 TFT LCD MODULE

Parameter Symbol

Ta = 25 ± 2 ºC

Value

Min. Typ. Max.

Unit Note

Power Supply Voltage Vcc 4.5 5.0 5.5 V (1) Ripple Voltage VRP - 100 - mV (2) Rush Current I

- 2.5 3 A

RUSH

White - 0.2 - A

Power Supply Current

Black - 0.3 - A Vertical Stripe

lcc

(3)

- 0.26 - A TTL input high threshold voltage VIH 2.3 - 3.3 V TTL input low threshold voltage VIL 0 - 1 V

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+5.0V

R1

47K

Q1 2SK1475

FUSE

C3

1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

R2

1K

47K

VR1

C1

1uF

0.01uF

Q2

2SK1470

C2

6

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

Vcc rising time is 470μs

0.1Vcc

GND

www.panelook.com

+5V

0.9Vcc

470μs

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, f

whereas a power dissipation check pattern below is displayed.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

= 60 Hz,

v

Active Area

R

B

R

B

R R

G

B

R

G

B

7

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

R

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

A

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

3.2 BACKLIGHT UNIT

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

Parameter Symbol

Lamp Input Voltage VL - 815 - V Lamp Current IL 5.5 6.0 6.5 mA

Lamp Turn On Voltage VS

Operating Frequency FL 40 - 60 KHz Lamp Life Time LBL 50,000 60,000 - Hrs (2)

Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:

LCD

Module

Min. Typ. Max.

- -

HV (Pink) LV (White)

HV (Blue) LV (White)

HV (Pink) LV (White)

HV (Pink)

LV (White)

HV (Blue)

LV (White)

HV (Pink) LV (White)

Value

1

2

3

2

1 2

3 2

1 2

1320 1650

A

Ta = 25 ± 2 ºC)

Unit Note

I

RMS

V

Ta = 25 ºC

RMS

Ta = 0 ºC

V

RMS

=6.0mA

L

Inverter

(1)

8

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the

display, and this may cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronous frequency and its harmonics as far

as possible.

Note (4) P

Note (5) The lifetime of a lamp is defined as the time in which it continues to operate under the condition Ta

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight, such as

lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the

parameters of an inverter should be carefully designed to avoid producing too much current leakage from

=(

Ӣ

lamp1-lamp6

L

= 25



2 oC and IL = (5.5) ~ (6.5) mArms until one of the following events occurs:

(a) When the brightness becomes equal or less than 50% of its original value.

(b) When the effective discharge length becomes equal or less than 80% of its original value.

(Effective discharge length is defined as an area that has equal or more than 70% brightness

compared to the brightness at the center point.)

IL VL)/0.8, PL is based on the inverter efficiency, which is 80%.

high voltage output of the inverter. When designing or ordering the inverter please make sure that a poor

lighting caused by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occurs. If

the above situation is confirmed, the module should be operated in the same manners when it is installed in

your instrument.

9

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

R0~R5

G0~G5

B0~B5

DCLK

DE

(LG-GF058-50S-LSS-AF (LG))

GND

VL

LAMP CONNECTOR

4.2 BACKLIGHT UNIT

INPUT CONNECTOR

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(640x3x480)

DATA DRIVER IC

BACKLIGHT UNIT

1 HV(Pink)

2 LV(White)

3 HV(Blue)

2 LV(White)

1 HV(Pink)

2 LV(White)

1 HV(Pink)

2 LV(White)

3 HV(Blue)

2 LV(White)

1 HV(Pink)

2 LV(White)

10

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin assignment

Pin Name Description

1 NC 2 NC 3 NC 4 GND Ground 5 GND Ground 6 VCC 7 VCC 8 VCC

9 VCC 10 GND Ground 11 NC 12 NC 13 GND Ground 14 DE Data Enable 15 GND Ground 16 DCLK Dot Clock 17 GND Ground 18 R5 19 R4 20 R3 21 R2 22 GND Ground 23 R1

R0

24

NC

25

Note (1) Connector Part No.: LG-GF058-50S-LSS-AF (LG) or compatible

Power Input (+5.0V)

Red Data (R5:MSB)

Red Data

www.panelook.com

Pin Name Description

26 NC 27 GND Ground 28 G5 29 G4 30 G3 31 G2 32 GND Ground 33 G1 34 G0 35 NC 36 NC 37 GND Ground 38 B5 39 B4 40 B3 41 B2 42 GND Ground 43 B1 44 B0 45 NC 46 NC 47 GND Ground 48 GND Ground 49 NC 50 NC

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Green Data (G5:MSB)

Green Data

Blue Data (B5:MSB)

Blue Data

5.2 BACKLIGHT UNIT

Pin Symbol Description Color

1 HV1 High Voltage Pink 2 LV Ground White 3 HV1 High Voltage Blue

Note (1) Connector Part No.: 35001HS-02L (YEONHO) or equivalent

Note (2) Matching Connector Part No.: 35001WR-02L (YEONHO) or equivalent

11

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

: Red(62) Red(63) Red(64)

Green(0) / Dark Green(1) Green(2)

:

: Green(62) Green(63) Green(64) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(62) Blue(63) Blue(64)

0

1

0

1

0

:

1

0

:

0

:

0

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

:

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

:

0

:

0

:

0

1

0

1

0

1

:

1

0

:

0

1

0

:

0

1

0

1

12

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Clock Frequency 1/Tc 20 25 30 MH

Frame Rate Fr 50 60 70 Hz -

Vertical Active Display Term

Horizontal Active Display Term

Input data Term

DE Term

Note: Since this module is operated in DE only mode, Hsync and Vsync input signals should be set to low

Total Tv 500 525 550 Th Tv=Tvd+Tvb Display Tvd 480 480 480 Th Blank Tvb 20 45 70 Th Total Th 700 800 900 Tc Th=Thd+Thb Display Thd 640 640 640 Tc Blank Thb 60 160 260 Tc Setup time TS 15 -- -- ns Hold time T Setup time T Hold time T

www.panelook.com

H

10 -- -- ns

SDE

HDE

15 10

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Z

-- -- ns

-

logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

DE

DCLK

DE

DATA

T

h

Tvd

Tv

Thd

Valid display data (640 cks)

Tvb

13

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

DCLK

DE

80%

50%

T

SDE

DATA

T

80%

20% 20%

T

50%

H

50%

T

HDE

80%

S

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

CC

Power Supply

V

CC

0V

0.9 V

0.1V

CC

0.9 V

0.1V

cc

T

3

T

6

T1

T4

Power Off

0

ЉЉЉЉ

T

1

ЉЉЉЉ

10ms

ЉЉЉЉ

T

2

ЉЉЉЉ

50ms

T

3

ЉЉЉЉ

50ms

T4

0

5s

Signals

0V

Backlight (Recommended)

ЉЉЉЉ

T

T5

6

450ms

100ms

Power On

2

T

VALI D

50%

5

T

50%

Power ON/OFF Sequence

14

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD operation or

the LCD turns off before the backlight turns off, the display may momentarily become abnormal screen.

(3) In case of

(4) T4 should be measured after the module has been fully discharged between power off and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

VCC

= off level, please keep the level of input signals on the low or keep a high impedance.

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha

25±2

50±10 Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 6 mA Inverter Driving Frequency FL 55 KHz Inverter SUMIDA IV76240/T --

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should be

measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 500 600 - - Note(2)

Response Time

Center Luminance of White L White Variation Cross Talk CT - - 4 % Note(5)

Red

Green Color Chromaticity

Blue

White

Color Gamut

Viewing

Horizontal

Angle

Vertical

TR - 3 5 ms

- 5 8 ms

T

F

C

δW

=0°, θY =0°

θ

Rx 0.619 0.649 0.679 Ry 0.301 0.331 0.361 Gx 0.247 0.277 0.307 -

x

Viewing Angle at Normal Direction

400 500 - cd/m2Note(4)

- - 1.6 - Note(7)

Gy 0.564 0.594 0.624 Bx 0.113 0.143 0.173 -

By 0.038 0.068 0.098 Wx 0.255 0.285 0.315 Wy 0.263 0.293 0.323 -

70 75 - %

θx+

θ

x

θY+

θ

Y

CR≥10

-

70 80 70 80 60 70 50 60 -

o

C

%RH

Note(3)

Note(6)

9300K

Deg. Note(1)

15

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

T

Note (1) Definition of Viewing Angle (θx, θy):

Viewing angles are measured by EZ-Contrast 160R (Eldim)

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

θX- = 90º

x-

6 o’clock

θ

y-

= 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L63 / L0

Normal

θx = θy = 0º

θy- θy+

θx−

θx+

12 o’clock direction

y+

θ

y+

= 90º

x+

θX+ = 90º

L63: Luminance of gray level 63

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

Gray Level 63

10%

0%

, TF):

R

Gray Level 63

Gray Level 0

T

R

T

F

ime

16

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

(

)

(

)

(

)

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Note (4) Definition of Luminance of White (LC, L

Measure the luminance of gray level 63 at center point and 5 points

LC = L (5)

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

L (x) is corresponding to the luminance of the point X at the figure in Note (7).

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA × 100 (%)

B

Where:

Y

= Luminance of measured location without gray level 0 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 0 pattern (cd/m2)

B

(0, 0)

Active Area

Y

(D/8,W/2)

A, L

Gray 32

Y

(D/2,7W /8)

A, D

Y

D,W

A, U

A, R

):

AVE

(D/2,W /8)

(7D/8,W/2)

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W /8)

B, D

0, 0

Active Area

Gray 0

Gray 32

Y

(D/2,W /8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

D,W

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 30 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

Display Color Analyzer

(Minolta CA210)

Light Shield Room

(Ambient Luminance < 2 lux)

17

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

4

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 63 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Horizontal Line

D

D/4 D/2 3D/4

W/

W/2

W

Vertical Line

3W /

12

: Test Point

5

34

X

X=1 to 5

Active Area

18

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 5 LCD TV modules / 1 Box

(2) Box dimensions : 573(L) X 323 (W) X 470 (H)

(3) Weight : approximately 18.5Kg ( 5 modules per box)

8.2 PACKING METHOD

Figures 8-1 and 8-2 are the packing method

LCD TV Module

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Carton

Anti-Static Bag

PE Foam

Drier

Figure.8-1 packing method

Carton dimensions:573(L)x323(W)x470(H)mm Weight

: Approx. 18.5Kg(5modules per carton)

Carton Label

19

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

Corner Protector:L1400*50mm*50mm

Pallet:L1180*W1000*H135mm Corrugated Fiberboard:L1180*W1000mm Pallet Stack:L1180*W1000*H1555mm

Gross:355kg

PE Sheet

Film

Corrugated Fiberboard

Carton Label

PP Belt

Figure. 8-2 Packing method

20

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

CHI MEI

OPTOELECTRONICS

www.panelook.com

V201V1 -T03 Rev. XX

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

E207943

MADE IN TAIWAN

X X X X X X X Y M D L N N N N

(a) Model Name: V201V1-T03

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) Serial ID: X X

Serial ID includes the information as below:

X X X X X Y M D L N N N N

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Revision

CMO Internal Use

(a) Manufactured Date: Year: 1~9, for 2000~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: Cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

st

to 31st, exclude I ,O, and U.

21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) It is recommended to assemble or to install a module into the user’s system in clean working areas.

The dust and oil may cause electrical short or worsen the polarizer.

(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.

(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

(5) Do not plug in or pull out the I/F connector while the module is in operation.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.

(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD

modules in the specified storage conditions.

(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while

assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

22

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTICS

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

23

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 22, 2007

Model No.: V201V1-T03

Approval

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version2.2

www.panelook.com

CMO V201V1-T03 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual