CMO V150V1-T02 Specification

Global LCD Panel Exchange Center

TFT LCD Approval Specification

MODEL NO.: V150V1 - T02

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Customer:

Approved by:

Note:

LCD TV Head Division

AVP

ພ஡ၼ

QRA Dept. TVHD/PDD

DDIII DDII DDI

Approval Approval Approval Approval

ຫةԫ ޕޫ ៴֮ᙘ ֮ࣥᜣ

LCD TV Marketing and Product Management Dept.

Product Manager

ᢅ٘ߜ ຫمࡵ

1

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT INVERTER UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 13

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING

------------------------------------------------------- 19

------------------------------------------------------- 3

------------------------------------------------------- 4

------------------------------------------------------- 5

------------------------------------------------------- 6

------------------------------------------------------- 9

------------------------------------------------------- 10

------------------------------------------------------- 15

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

------------------------------------------------------- 21

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

10.3 SAFETY REGULATION

------------------------------------------------------- 22

11. MECHANICAL CHARACTERISTICS

------------------------------------------------------- 23

2

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

REVISION HISTORY

Version Date

Ver 2.0

Ver. 2.1

Ver. 2.2

Jan. 17,’05

Jun. 24,’05

Nov. 17,’05

Page

(New)

All

23

9

10

23-24

Section Description

Approved Specification was first issued.

All

Update mechanical drawing

11

Input connector: P-Two AF7501-N2G1ZÆ Hirose FH12-50S-0.5SH

4

(82) Note (1) Connector Part No.: AF7501-N2G1Z (P-Two)Æ Hirose P/N:

5

FH12-50S-0.5SH (82) Sony’s P/N: 1-778-451-52 Sony’s SB No: SB-J6491

11

Update mechanical drawing

3

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V150V1-T02 is a 15” TFT Liquid Crystal Display module with 4-UCCFL Backlight unit and 1ch-TTL

interface. This module supports 640 x 480 VGA format and displays 16.2M colors ( 6bits + FRC).

1.2 FEATURES

- High brightness 500 nits

- High contrast ratio 800:1

- Fast response time

- High color saturation NTSC 72%

- VGA (640 x 480 pixels) resolution

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

- DE (Data Enable) only mode

- TTL interface

1.3 APPLICATION

- TFT LCD TVs

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 305.28 (H) x 228.96 (V) mm Bezel Opening Area 311.2 (H) x 235.0 (V) mm Driver Element a-si TFT active matrix - Pixel Number 640 x R.G.B. x 480 pixel Pixel Pitch(Sub Pixel) 0.1555 (H) x 0.4665 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.2M color Display Operation Mode Transmissive mode / Normally black - -

Surface Treatment

Hardness : 3H, Haze : 25%

Anti-reflective coating < 2% reflection

- -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 330.7 331.2 331.7 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 255.5 256.0 256.5 mm

Depth(D) 34.4 36.2 37.2 mm

Weight 1160 1260 1360 gm. -

(1)

With PCB

Cover

4

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Value

Min. Max.

- 50 G (3), (5)

NOP

- 1.0 G (4), (5)

NOP

Unit Note

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 60 ºC with LCD module alone in a temperature controlled chamber.

Thermal management should be considered in your product design to prevent the surface temperature

of display area from being over 60 ºC. The range of operating temperature may degrade in case of

improper thermal management in your product design.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 500 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that

the module would not be twisted or bent by the fixture.

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

10

Storage Range

Temperature (ºC)

5

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8060-20 40 0 20 -40

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +5.5 V

2.2.2 BACKLIGHT INVERTER UNIT

Item Symbol

Lamp Voltage VW

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Ё

3000 V

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Unit Note

RMS

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V (1) Ripple Voltage VRP - - 150 mV (2) Rush Current I

- - 2.5 A

RUSH

White - 0.85 - A

Power Supply Current

Black - 0.70 - A Vertical Stripe

lcc

- 0.80 - A TTL input high threshold voltage VIH 2.7 - 3.3 V TTL input low threshold voltage VIL 0 - 0.7 V

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+5.0V

Q1 2SK1475

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R1

47K

R2

1K

0.01uF

Q2

2SK1470

C2

Value

FUSE

C3

1uF

Unit Note

Vcc

(LCD Module Input)

(3)

6

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Vcc rising time is 470Ps

0.1Vcc

GND

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

+5V

0.9Vcc

470Ps

Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, f

whereas a power dissipation check pattern below is displayed.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

B

R

G

B

R

= 60 Hz,

v

R

Active Area

B

R R

G

B

R

G

B

7

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

R

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Nov. 17. 2005

3.2 BACKLIGHT UNIT

DCC NO.: 24053060

Model No.: V150V1-T02

Approval

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

Parameter Symbol

Lamp Voltage VW

Min. Typ. Max.

- 985 -

Value

Ta = 25 ± 2 ºC)

V

Lamp Current IL 4.5 5.0 5.5 mA

Lamp Starting Voltage VS

- - 1900

- - 1700

V

Operating Frequency FO 40 - 80 KHz (3)

Lamp Life Time LBL 50,000 60,000 - Hrs (4)

Note (1) Lamp current is measured by utilizing high frequency current meters as shown below

HV (Pink)

HV (White)

1

2

A

HV (Blue)

LCD

Module

HV (White)

HV (Blue)

1

2

1

2

A

Unit Note

I

RMS

(1)

RMS

(2), Ta = 0 ºC

RMS

(2), Ta = 25 ºC

RMS

= 5.0 mA

L

Inverter

HV (White)

1

A

HV (Pink)

2

A

Note (2) The lamp starting voltage V

should be applied to the lamp for more than 1 second after startup.

S

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the

display input signals, and it may result in line flow on the display. In order to avoid interference, the

lamp frequency should be detached from the horizontal synchronous frequency and its harmonics

as far as possible.

Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value

and the effective discharge length is longer than 80% of its original length (Effective discharge

length is defined as an area that has equal to or more than 70% brightness compared to the

brightness at the center point of lamp.) as the time in which it continues to operate under the

condition at Ta = 25 2к and I

= 4.5 ~ 5.5 mArms.

L

8

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

%$&./,*+7,19(57(581,7

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

(Hirose FH12-50S-0.5SH (82))

R0~R7

G0~G7

B0~B7

DCLK

DE

Vcc

GND

INPUT CONNECTOR

INVERTER CONNECTOR

SCAN DRIVER IC

FRAME BUFFER

TFT LCD PANEL

(640x3x480)

TIMING CONTROLLER

DATA DRIVER IC

DC/DC CONVERTER &

REFERENCE VOLTAGE

9

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

CN1 Connector Pin assignment

Pin Name Description

1 NC No Connection 2 NC No Connection 3 NC No Connection 4 GND Ground 5 GND Ground 6 VCC 7 VCC 8 VCC

9 VCC 10 GND Ground 11 NC 12 NC 13 GND Ground 14 DE Data Enable 15 GND Ground 16 DCLK Dot Clock 17 GND Ground 18 R7 19 R6 20 R5 21 R4 22 GND Ground 23 R3

R2

24

R1

25

Note (1) Connector Part No.: Hirose P/N: FH12-50S-0.5SH (82)

Power Input (+5.0V)

Red Data (R7:MSB)

Red Data

www.panelook.com

Pin Name Description

26 R0 Red Data 27 GND Ground 28 G7 29 G6 30 G5 31 G4 32 GND Ground 33 G3 34 G2 35 G1 36 G0 37 GND Ground 38 B7 39 B6 40 B5 41 B4 42 GND Ground 43 B3 44 B2 45 B1 46 B0 47 GND Ground 48 GND Ground 49

NC No Connection

50

NC No Connection

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Green Data (G7:MSB)

Green Data

Blue Data (B7:MSB)

Blue Data

Sony’s P/N: 1-778-451-52

Sony’s SB No: SB-J6491

Note (2) NC pin has to

keep high impedance

10

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.2 BACKLIGHT UNIT

The pin configuration for the housing and leader wire is shown in the table below.

Pin  Signal name Feature

1 HV High Voltage 2 HV High Voltage

Note (1) The backlight interface housing for high voltage side is a model BHR-04VS-1, manufactured by JST.

The mating header on inverter part number is SM02(12.0)B-BHS-1-TB(LF).

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

CN2-CN5(Housing): BHR-04VS-1

1 HV(Pink)

2 HV(White)

1 HV(Blue)

2 HV(White)

1 HV(White)

2 HV(Blue)

1 HV(White)

2 HV(Pink)

11

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of color

versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Basic Colors

Gray Scale Of Red

Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

0

1

0

1

0

:

1

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

Green(0) / Dark

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(1) Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

12

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Clock Frequency 1/Tc 20 25 30 MHZ -

Frame Rate Fr 47 60 63 Hz -

Vertical Active Display Term

Horizontal Active Display Term

Input data Term

DE Term

Note: Since this module is operated by in DE only mode, Hsync and Vsync input signals should be set to

low logic level or ground. Otherwise, this module would operate abnormally.

Total Tv 500 525 550 Th Tv=Tvd+Tvb Display Tvd 480 480 480 Th Blank Tvb 20 45 70 Th Total Th 750 800 850 Tc Th=Thd+Thb Display Thd 640 640 640 Tc Blank Thb 110 160 210 Tc Setup time TS 7 -- -- ns Hold time T Setup time TSDE 7 -- -- ns Hold time T

INPUT SIGNAL TIMING DIAGRAM

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

H 7 -- -- ns

HDE 7 -- -- ns

Tvd

Tv

Tvb

DE

Th

DCLK

DE

Tc

Thd

Thb

DATA

Valid display data (640 cks)

DCLK

DE

50%

TSDE

80%

T

TH

S

50%

THDE

80%

DATA

20% 20%

13

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Љ

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Power Supply

V

0ЉT1Љ10ms

0

1s

CC

0V

2

50ms

T

3

50ms

T

4

T

Signals

0V

Backlight (Recommended) 100 ms

100ms

T

T6

5

1.8 s

0.9 V

CC

0.1V

Power On

CC

0.9 V

CC

0.1V

T

3 T1

T

2

T4

VALI D

Power Off

50%

5

T

50%

T

6

Power ON/OFF Sequence

Note (1) The supply voltage of the external system for the module input should be the same as the definition of

Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become abnormal

screen.

Note (3) In case of

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

14

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current IL

Oscillating Frequency (Inverter) FW

Frame Rate Fr 60 Hz

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should be

www.panelook.com

25r2

50r10

5.00.5 613

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

o

C

%RH

mA

KHz

measured under the test conditions described in 7.1 and stable environment shown in Note (7).

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 600 800 - - Note(2)

TR - 15 25 ms

Response Time

Center Luminance of White L Average Luminance of White L White Variation Cross Talk CT - - 4.0 % Note(6)

Red

Green Color Chromaticity

Blue

White

Color Gamut CG

Viewing

Horizontal

Angle

Vertical

TF - 10 20 ms

Gray to gray

average

C

400 450 - cd/m2Note(5)

AVE

GW

=0q, TY =0q

T

x

- 12 16 ms Note(4)

400 500 - cd/m2Note(5)

- - 1.3 - Note(8)

Viewing Normal

Rx 0.615 0.645 0.675 Ry 0.310 0.330 0.360 -

Angle

Gx 0.241 0.271 0.301 Gy 0.560 Bx 0.113 By 0.036

0.590

0.143

0.066

0.620 -

0.173 -

0.096 Wx 0.242 0.272 0.302 Wy 0.248 0.278 0.308 -

70 72 - % NTSC

Tx+

T

x

TY+

T

Y

CRt20

-

80 88 80 88 80 88 80 88 -

Deg. Note(1)

Note(3)

Note(7)

15

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Definition of Viewing Angle (Tx, Ty):

Viewing angles are measured by Eldim EZ-Contrast 160R

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

TX- = 90º

x-

6 o’clock

T

y- = 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

Normal

Tx = Ty = 0º

Ty- Ty

Tx

Tx

12 o’clock direction

y+

T

y+ = 90º

x+

TX+ = 90º

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 255

T

, TF):

R

F

Gray Level 0

Gray Level 255

T

R

Time

16

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

A

Note (4)

100%

90%

Optical

Response

10%

0%

The driving signal means the signal of gray level 0, 63, 127, 191, 255.

Gray to gray switching time

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Time Gray to gray switching time

Gray to gray average time means the average switching time of gray level 0 ,63,127,191,255 to each

other.

Note (5) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point and 5 points

LC = L (5)

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

L (x) is corresponding to the luminance of the point X at the figure in Note (7).

Note (6) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA u 100 (%)

B

Where:

Y

= Luminance of measured location without gray level 0 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 0 pattern (cd/m2)

B

(0, 0)

ctive Area

Y

(D/8,W/2)

A, L

Gray 128

Y

(D/2,7W/8)

A, D

Y

A, R

(D,W)

, L

C

AVE

(D/2,W/8)

A, U

(7D/8,W/2)

):

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

(0, 0)

ctive Area

Gray 0

Gray 128

Y

(D/2,W/8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

(D,W)

17

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (7) Measurement Setup:

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be executed

after lighting Backlight for 1 hour in a windless room.

LCD Module

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Note (8) Definition of White Variation (GW):

Measure the luminance of gray level 255 at 5 points

GW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

LCD Panel

Center of the Screen

Display Color Analyzer

(Minolta CA210)

Light Shield Room

(Ambient Luminance < 2 lux)

Horizontal Line

D

D/4 D/2 3D/4

Vertical Line

W

W/4

W/2

3W/4

1 2

X

5

3 4

Active Area

: Test Point

X=1 to 5

18

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 7 LCD TV modules / carton

(2) carton dimensions :495(L) X 436 (W) X 360 (H)

(3) Weight : approximately 12Kg ( 7 modules per carton)

8.2 PACKING Method

Figures 8-1 and 8-2 are the packing method

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

LCD TV Module

Anti-Static Bag

PE Foam(Bottom)

Carton

Drier

Carton

Figure.8-1 packing method

Carton dimensions:495(L)x436(W)x360(H)mm Weight

: Approx. 12Kg(7 modules per carton)

Carton Label

19

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Corner Protector:L1400*50mm*50mm

Pallet:L960*W960*H135mm

Corrugated Fiberboard:L960*W960mm

Pallet Stack:L960*W960*H1585mm Gross:207kg

PE Sheet

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

Film

Carton Label

Corrugated Fiberboard

PP Belt

Figure. 8-2 Packing method

20

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

CHI MEI

OPTOELECTRONICS

(a) Model Name: V150V1-T02

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) Serial ID: X X

X X X X X Y M D L N N N N

V150V1 -T02 Rev. XX

X X X X X X X Y M D L N N N N

MADE IN TAIWAN

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Revision

E207943

MADE IN TAIWAN

Serial ID includes the information as below:

(a) Manufactured Date: Year: 1~9, for 2000~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: Cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

st

to 31st, exclude I ,O, and U.

CMO Internal Use

21

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) It is recommended to assemble or to install a module into the user’s system in clean working areas.

The dust and oil may cause electrical short or worsen the polarizer.

(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.

(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

(5) Do not plug in or pull out the I/F connector while the module is in operation.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.

(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD

modules in the specified storage conditions.

(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while

assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY REGULATION

(1) V150V1 is certified with Safety Regulation UL 6500. File No.E240708

(2) V150V1 is certified with Safety Regulation UL 60950. File No.E207943

(3) V150V1 is certified with Safety Regulation IEC 60065.

(4) V150V1 is certified with Safety Regulation IEC 60950.

22

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTICS

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

࡛ભሽ՗ٝڶૻֆ׹

%*+/'+

23

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DCC NO.: 24053060

Issued Date: Nov. 17. 2005

Model No.: V150V1-T02

Approval

࡛ભሽ՗ٝڶૻֆ׹

%*+/'+

˅˄ ˆ ˇ ˅ ˆ ˇ˄ ˅˄ ˆ ˇ ˅ ˆ ˇ˄

24

Version2.2

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

CMO V150V1-T02 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual