How it Works
CMO
Loading...
N156B6-P06
Specification
29 pgs1.29 Mb0

CMO N156B6-P06 Specification

Download
Global LCD Panel Exchange Center
ு଱ழၴ ຝ ᐉு ߡۥ ދป
ข঴ጥ෻๠
楊
竣 傑
TFT LCD Preliminary Specification
MODEL NO.: N156B6-P06
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Customer:
Approved by:
Note: To Be Approved by System.
2009-11-20
NB
2009.11.20
Director Accept
08:22:42
1 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
------------------------------------------------------- 4
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD OPEN CELL
4. BLOCK DIAGRAM ------------------------------------------------------- 10
4.1 TFT LCD OPEN CELL
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 11
5.1 TFT LCD OPEN CELL
5.2 LED CONVERTER PIN ASSIGNMENT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
6. CONVERTER SPECIFICATION ------------------------------------------------------- 15
6.1 ABSOLUTE MAXIMUM RATINGS
6.2 POWER ON/OFF SEQUENCE
6.3
LED CONVERTER OUTPUT RATINGS
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
7.2 POWER ON/OFF SEQUENCE
------------------------------------------------------- 17
8. OPTICAL CHARACTERISTICS ------------------------------------------------------- 20 8
.1 TEST CONDITIONS
8.2 OPTICAL SPECIFICATIONS
8.3 FLICKER ADJUSTMENT
9. PACKAGING ------------------------------------------------------- 24
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
10. DEFINITION OF LABELS ------------------------------------------------------- 26
10.1 CMO OPEN CELL LABEL
10.2 CMO CARTON LABEL
11. PRECAUTIONS
11.1 ASSEMBLY AND HANDLING PRECAUTIONS
11.2 SAFETY PRECAUTIONS
12. MECHANICAL DRAWING
------------------------------------------------------- 28
------------------------------------------------------- 29
2 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
REVISION HISTORY
Version Date Section Description
Ver. 1.0 Nov, 11 ’09 All N156B6-P06 Preliminary Specifications 1.0 was first issued.
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
3 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The N156B6-P06 is a 15.6-inch TFT LCD cell with driver ICs and a 40-pin-and-1ch-LVDS circuit board.
The product supports 1366 x 768 HD mode and can display up to 262,144 colors. The backlight unit is not
built in.
1.2 FEATURES
- HD (1366 x 768 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface
- LED converter embedded
1.3 APPLICATION
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
-TFT LCD Notebook
-TFT LCD Monitor
-TFT LCD TV
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Active Area 344.232(H) x 193.536(V) (15.547” diagonal) mm (1) Driver Element a-si TFT active matrix - ­Pixel Number 1366 (H) x 3 (R.G.B.) x 768 (V) pixel ­Pixel Pitch 0.252 (H) x 0.252 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally White - ­Surface Treatment Glare, N2T (Reflection rate< 0.5%), 3H - -
1.5 MECHANICAL SPECIFICATIONS
item Min. Typ. Max. Unit Note
Horizontal (H) with PCB 353.532 353.632 353.732 mm Horizontal (H) w/o PCB 353.532 353.632 353.732 mm Vertical (V) with PCB 248.536 249.536 250.536 mm
Size
Vertical (V) w/o PCB 202.086 203.086 204.086 mm Thickness (T) with PCB - 1.8 mm Thickness (T) w/o PCB 1.12 1.27 1.42 mm
Weight - 215 220 g
I/F connector mounting position
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
(1) (2)
(2) Connector mounting position
+/- 0.5mm
4 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
www.panelook.com
Value
Min. Max.
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Unit Note
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20 10
Storage Range
Temperature (ºC)
8060-20 40 0 20 -40
5 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
High temperature or humidity may reduce the performance of panel. Please store LCD panel within
the specified storage conditions.
Storage Condition: With packing.
Storage temperature range: 25±5 ºC.
Storage humidity range: 50±10%RH.
Shelf life: 30days
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Item Symbol
Power Supply Voltage VCCS -0.3 +4.0 V
Logic Input Voltage VIN -0.3 VCCS+0.3 V
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Value
Min Max
Unit Note
(1)
6 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD OPEN CELL Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max. Power Supply Voltage VCCS 3.0 3.3 3.6 V ­Ripple Voltage VRP - 50 - mV ­Rush Current I
- - 1.5 A (2)
RUSH
Initial Stage Current IIS - - 1.0 A (2)
Power Supply Current
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
White 240 260 280 mA (3)a Black
lcc
TH(LVDS)
TL(LVDS)
350 380 400 mA (3)b
- - +100 mV
-100 - - mV
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (5) LVDS Differential Input Voltage |VID| 100 - 600 mV (5) Terminating Resistor RT - 100 - Ohm -
Note (1) The module should be always operated within above ranges.
Value
Unit Note
Preliminary
(5),
=1.2V
V
CM
(5)
=1.2V
V
CM
Note (2) I
: the maximum current when VCCS is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
(High to Low)
(Control Signal)
SW
+12V
+3.3V
R1
47K
R2
1K
47K
VR1
C1
1uF
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
VCCS
(LCD Module Input)
7 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
|
|
|
|
Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
VCCS rising time is 0.5ms
Current and f
a. White Pattern
Note (4) The parameters of LVDS signals are defined as the following figures.
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
Active Area
CM
V
Single Ended
Active Area
VID
0V
V
VID
Differential
0V
V
8 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (5) The specified power are the sum of LCD panel electronics input power and the converter input
power. Test conditions are as follows.
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
(a) VCCS = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file “Flat
Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
(c) Luminance: 60 nits.
= 60 Hz,
v
9 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
SC
C
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
LVDS Display
Data & Clock
VCCS
GND
Data
EDID
CLK
EDID
V
EDID
Converter
Input Signals
LVDS INPUT /TIMING
CONTROLLER
AN DRIVER I
TFT LCD PANEL
INPUT CONNECTOR
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
DATA DRIVER IC
EDID
EEPROM
LED CONVERTER
LED CONVERTER
OUTPUT
PAD/CONNECTOR
10 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD OPEN CELL
Pin Symbol Description Polarity Remark
1 Reserve Non-Connection use by CMO 2 Vcc Power Supply +3.3 V (typical) 3 Vcc Power Supply +3.3 V (typical) 4 V 5 Reserve Non-Connection use by CMO 6 CLK 7 DATA 8 Rxin0- LVDS Differential Data Input Negative
9
10 Vss Ground 11 Rxin1- LVDS Differential Data Input Negative
12
13 Vss Ground 14 Rxin2- LVDS Differential Data Input Negative
15
16 Vss Ground 17 CLK- LVDS Clock Data Input Negative
18
19 Vss Ground 20 NC Non-Connection 21 NC Non-Connection 22 Vss Ground 23 NC Non-Connection 24 NC Non-Connection 25 Vss Ground 26 NC Non-Connection 27 NC Non-Connection 28 Vss Ground 29 NC Non-Connection 30 NC Non-Connection 31
LED_GND 32 LED_GND Ground_LED 33 LED_GND Ground_LED 34 Reserve Non-Connection use by CMO 35 LED_PWM System PWM Signal Input 36 LED_EN LED enable pin 37 Reserve Non-Connection use by CMO 38 LED_VCCS LED Power 39 LED_VCCS LED Power 40 LED_VCCS LED Power
Note (1) Connector Part No.: IPEX 20455-040E-12 or equivalent
DDC 3.3V Power DDC 3.3V Power
EDID
DDC Clock DDC Clock
EDID
DDC Data DDC Data
EDID
Rxin0+ LVDS Differential Data Input
Rxin1+ LVDS Differential Data Input
Rxin2+ LVDS Differential Data Input
CLK+ LVDS Clock Data Input
Ground_LED
www.panelook.com
Positive
Positive
Positive
Positive
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
R0~R5,G0
G1~G5, B0, B1
B2~B5, DE, Hsync, Vsync
LVDS Level Clock
Note (2) User’s connector Part No: IPEX 20453-040T or equivalent
Note (3) The first pixel is odd as shown in the following figure.
11 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
12 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
5.2 LED CONVERTER OUTPUT PIN ASSIGNMENT
Pin Symbol Description
1 V
L
LED converter output voltage 2 VL LED converter output voltage 3 CH1 LED converter feedback channel 1 4 CH2 LED converter feedback channel 2 5 CH3 LED converter feedback channel 3 6 CH4 LED converter feedback channel 4 7 CH5 LED converter feedback channel 5
8 CH6 LED converter feedback channel 6
Note (1) Connector Part No.: ???? or equivalent
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
CLK+
Rxin2
Rxin1
Rxin0
T/7
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN5 IN4 IN3 IN2 IN1 IN0
G0 R3 R2 R1 R0
R5
R4
Signal for 1 DCLK Cycle (T)
13 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
5.4 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black Red Green
Basic Colors
Gray Scale Of Red
Gray Scale Of Green
Gray Scale Of Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue Cyan Magenta Yellow White Red(0)/Dark Red(1) Red(2)
:
: Red(61) Red(62) Red(63) Green(0)/Dark Green(1) Green(2)
:
: Green(61) Green(62) Green(63) Blue(0)/Dark Blue(1) Blue(2)
:
: Blue(61) Blue(62) Blue(63)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
14 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
6. CONVERTER SPECIFICATION
6.1 ABSOLUTE MAXIMUM RATINGS
Symbol Ratings
LED_VCCS -0.3V~25V
LED_PWM -0.3~5.0V
LED_EN -0.3V~5.0V
6.2 RECOMMENDED OPERATING RATINGS
Parameter Symbol
Converter Input power supply voltage Converter Rush Current Converter Initial Stage Current
EN Control Level
PWM Control Level
PWM Control Duty Ratio
PWM Control Permissive Ripple Voltage PWM Control Frequency f
Note (1) ILED
ILED
: the maximum current when LED_VCCS is rising,
RUSH
: the maximum current of the first 100ms after power-on,
IS
Measurement Conditions: Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, f
200 Hz, Duty=100%.
Backlight On 2.3 5.0 V ­Backlight Off 0.0 0.5 V ­PWM High Level 2.3 5.0 V ­PWM Low Level 0.0 0.5 V -
www.panelook.com
Min. Typ. Max.
LED_Vccs
ILED
RUSH
ILED
IS
VPWM_pp
PWM
6.0 12.0 21.0 V -
- - 1.5 A (1)
- - 1.5 A (1)
10 - 100 % -
5 - 100 % (2)
- - 100 mV -
190 210 2k Hz (3)
Value
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Unit Note
=
PWM
(High to Low)
(Control Signal)
SW=24V
LED_VCCS(Typ)
LED_VCCS(Typ)
C1
1uF
VR1
R1
47K
47K
Q1 IRL3303
FUSE
R2
1K
0.01uF
Q2
IRL3303
C2
C3
1uF
(LED Converter Input)
15 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
≤∗+
+
≤
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
VLED rising time is 0.5ms
0.5ms
90%
ILED
10%
Rush
100ms
ILED
IS
LED_VCC
LED_PWM
LED_EN
ILED
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
0V
0V
0V
follow the criterion as below.
PWM control frequency f
fN )33.0( f
should be in the range
PWM
PWM
fN ∗
)66.0(
N : Integer )3( ≥N
f
: Frame rate
6.3 LED CONVERTER OUTPUT RATINGS
Parameter Symbol
Converter output voltage Converter output current Converter feedback channel current ICH 19 20 21 mA
V
L
I
L
Min. Typ. Max.
22.4 25.6 28 V 114 120 126 mA
Value
Unit Note
16 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 67.9 75.5 80 MHz (2)
Vertical Total Time TV 778 806 888 TH -
Vertical Active Display Period TVD 768 768 768 TH -
DE
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.
Vertical Active Blanking Period TVB TV-TVD 38 TV-TVD TH -
Horizontal Total Time TH 1446 1560 1950 Tc (2)
Horizontal Active Display Period THD 1366 1366 1366 Tc (2)
Horizontal Active Blanking Period THB
www.panelook.com
TH-THD
194
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
TH-THD
Tc (2)
DE
DCLK
DE
DATA
INPUT SIGNAL TIMING DIAGRAM
TC
HD
T
17 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
7.2 POWER ON/OFF SEQUENCE
90%
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
t7
90%
- Power Supply
for LCD, VCCS
- Interface Signal
(LVDS Signal of Transmitter), V
I
- Power Supply for
LED Converter, LED_VCCS
- LED Converter
Dimming Signal, LED_PWM
- LED Converter
Enable Signal, LED_EN
0V
0V
0V
0V
0V
10%
10%
t1
t2
t3
10%
t4
Valid Data
t6t5
90%
10%
t
B
t
D
F
10%
90%
t
A
t
C
tE t
Timing Specifications:
0.5Љ t1ʳЉ 10 ms
0 Љ t2ʳЉ 50 ms
0 Љ t3ʳЉ 50 ms
t4ʳЊ 500 ms
t5ʳЊ 200 ms
t6ʳЊ 200 ms
0.5Љ t7ʳЉʳ 10 ms
0.5Љ t
0 І t
ʳЉʳ 10 ms
A
ʳЉʳ 10 ms
B
t
ʳЊ 10 ms
C
t
ʳЊ 10 ms
D
t
ʳЊ 10 ms
E
t
ʳЊ 10 ms
F
18 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be
damaged.
Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be
sure to pull down the power supply of LCD VCCS to 0 V.
Note (3) The backlight must be turned on after the power supply for the logic and the interface signal is valid.
The backlight must be turned off before the power supply for the logic and the interface signal is
invalid.
Note (4) Please follow the LED converter power sequence as above. If the customer could not follow, it might
cause backlight flash issue during display ON/OFF or damage the LED backlight controller
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
19 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
8. OPTICAL CHARACTERISTICS
8.1 TEST CONDITIONS
Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
8.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown as below. The following items
should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Color Chromaticity
Center Transmittance T% Contrast Ratio CR
Response Time
Transmittance uniformity δT%
Viewing Angle
Green
Blue
White
Horizontal
Vertical
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
o
25±2
50±10
Rcx 0.630 Rcy
0.329
Gcx 0.284
θ
=0° , θY =0°
Gcy Bcx 0.156
Bcy
Standard light source “C”
x
CS-1000T
Typ -
0.03
0.564
0.122
Typ +
0.03
Wcx 0.314 Wcy
θ
=0° , θY =0°
x
5.5 6.5
0.347
CS-1000T, CMO BLU 500 650 - (1), (3)
T
R
T
F
θ
=0° , θY =0°
x
θ
=0° , θY =0°
x
BM-5A
7 12
1.25
38
θx+ 40 45
- 40 45
θ
x
θY+ 15 20
-
θ
Y
CR≥10 BM-5A
40 45
C
%RH
-
-
-
-
-
-
-
-
(1), (8)
ms ms
- (1), (7)
Deg.
(0),(6)
(4)
(1), (3)
(6)
Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are
based on suitable gamma voltages. The calculating method is as followingΚ
1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with
signal input. BLU is supplied by CMO.
2. Calculate cell’s spectrum.
3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”
Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable
gamma voltages. White is without signal input and R, G, B are with signal input. SPEC is judged
by CMO’s golden sample.
Note (2) Definition of Viewing Angle (θx, θy):
20 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
.67 ms
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Normal
θx = θy = 0º
θy- θy+
θX- = 90º
6 o’clock
θ
y- = 90º
x-
y-
Note (3) Definition of Contrast Ratio (CR):
CR
= [CR(1)+ CR(2)+ CR(3)+ CR(4)+ CR(5)] / 5
AVE
CR
=Max value of CR at whole Viewing Angle
max
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Luminance with all pixel white (Gmax)
CR =
Luminance with all pixel black (Gmin)
θx−
θx+
y+
12 o’clock direction
θ
y+ = 90º
x+
θX+ = 90º
Gmax: Luminance of gray max at the center point of panel.
Gmin: Luminance of gray min at the center point of panel.
Note (4) Definition of Response Time (T
Gray Level 255
100%
90%
Optical
Response
10%
0%
T
66.67 ms
R
R
, TF):
66
Gray Level 255
Time
T
F
21 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (5) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
L
= L (5)
C
L (x) is corresponding to the luminance of the point X at Figure in Note (7).
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
USB2000
Field of View = 2º
Center of the Screen
Note (7) Definition of Transmittance Variation (δT%):
Measure the transmittance at 5 points
Maximum [T%(1), T%(2), … T%(5)]
T% =
δ
Minimum [T%(1), T%(2), … T%(5)]
Horizontal Line
D/4 D/2 3D/4
CS-2000T
Light Shield Room
(Ambient Luminance < 2 lux)
D
W/4
W/2
W
Vertical Line
3W/4
1 2
X
: Test Point
X=1 to 5
3
5
4
Active Area
22 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (8) Definition of Transmittance (T%):
Module is without signal input.
BLU is supplied by CMO.
Transmittance =
8.3 Flicker Adjustment
(1) Adjustment Pattern: 2H1V checker pattern as follows.
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Luminance of LCD module
Ϡ 100%
Luminance of backlight
(2) Adjustment Method:
Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is
adjusted to the point with least flickering of the whole screen. After making it surely overrun at once, it
should be adjusted to the optimum point.
23 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
9. PACKAGING
9.1 PACKING SPECIFICATIONS
(1) 27 open cells / 1 Box
(2) Box dimensions: 475mm(L) X 390mm(W) X 320mm(H)
(3) Weight: approximately 16.5Kg (27 open cells per box)
9.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items
Test Item Test Conditions Note
ISTA STANDARD
Packing Vibration
Random, Frequency Range: 1 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Non Operation
(2) Packing method.
24 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
25 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
10. DEFINITION OF LABELS
10.1 CMO OPEN CELL LABEL
The barcode nameplate is pasted on each OPEN CELL as illustration for CMO internal control.
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
Made in XXXX
N156B6-P06
XXXXXXXYMDLNNNN
Rev. XX
(a) Model Name: N156B6-P06
(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X X X X X X Y M D L N N N N
Serial No.(
Product Line(grade,
Year, Month, Date(ߓอ൅נ)
CMO Internal Use(Product ID,ߓอ൅נ)
CMO Internal Use(ᐗܑ Code,ߓอ൅נ)
Revision(ߓอ൅נ,ᇿထ BOM ڻ᧢ޓ)
ߓอ൅נ)
ߓอ൅נ)
CMO Internal Use (Model Code,ߓอ൅נ,ࡐࡳլ᧢)
(d) Production Location: MADE IN XXXX. XXXX stands for production location.
26 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
10.2 CARTON LABEL
The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation
(a) Model Name: N156B6 –P06
(b) Carton ID: CMO internal control
(c) Quantities: 27
N156B6-P06
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
27
27 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 11, 2009
Model No.: N156B6-P06
Preliminary
11. PRECAUTIONS
11.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the product during assembly.
(2) To assemble backlight or install module into user’s system can be only in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel will be
damaged.
(4) Always follow the correct power sequence when the product is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the
product when it is operating.
(8) High temperature or humidity may reduce the performance of module. Please store this product within
the specified storage conditions.
(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
11.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the product’s end of life, it is not harmful in case of normal operation and storage.
28 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use