CMO N141X6-L01 Specification

Global LCD Panel Exchange Center

www.panelook.com

CMO Part Number: 908

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.4 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

8.2 SAFETY PRECAUTIONS

9. PACKING

9.1 CARTON

9.2 PALLET

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL

10.2 CARTON LABEL

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

- CONTENTS -

------------------------------------------------------- 3

------------------------------------------------------- 4

------------------------------------------------------- 5

------------------------------------------------------- 7

------------------------------------------------------- 10

------------------------------------------------------- 11

------------------------------------------------------- 13

------------------------------------------------------- 15

------------------------------------------------------- 19

------------------------------------------------------- 20

------------------------------------------------------- 21

2 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

REVISION HISTORY

Version Date

Ver 1.0

Ver 2.0

Ver 2.1

Ver 2.2

Ver 3.0

July.1.’01

Sep.17.’01

Mar.06.’02

Nov.27.’02

Dec.09.’02

Page

(New)

All

4

6

7

8

12

14

19

20

22

Section Description

Preliminary Specification was first issued.

All

1.4

1.5

2.2.2

3.1

3.2

6.1

7.1

7.2

9.1

10.1

10.2

10.1

Modify surface treatment from Haze 12 to Haze 25

Revise Mechanical specifications table

Revise Backlight Unit specifications table

Modify some type-miss items

L

Revise specifications of “3.1 TFT LCD Module” Table

Delete 3.1 Note (3)

Modify the input signal timing specifications from TBD to specific value

Revise the table and timing diagram

Delete 6.1 Note (1) and change Note (2) to Note (1)

Revise optical test conditions table

Modify the optical specification from TBD to specific value.

Updated Figure 9.1 packing method

Revise the CMO Module Label

Delete 10.2 Customer Module Label.

Revise the CMO Module Label

Revise Outline Drawing

ʳ Ш I

CC

Inverter Driving Frequency : 55 Inverter : TBDʳ Ш Sumida-H05-4783B

, V

CC

ʳ Ш V

IL

IH ,

ʳ Ш 60

V

IH

ʳ Ш V

IL

3 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

N141X6- L01 is a 14.1” TFT Liquid Crystal Display module with single CCFL Backlight unit and 20 pins

LVDS interface. This module supports 1024 x 768 XGA mode and can display 262,144 colors. The optimum

viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.

1.2 FEATURES

- Thin and light weight and high brightness

- XGA (1024 x 768 pixels) resolution

- DE (Data Enable) only mode

- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

1.3 APPLICATION

- TFT LCD Notebook

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 285.7 (H) x 214.3 (V) (14.1” diagonal) mm Bezel Opening Area 288.9 (H) x 217.5 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1024 x R.G.B. x 768 pixel Pixel Pitch 0.279 (H) x 0.279 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 298.0 298.5 299.0 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 226.0 226.5 227.0 mm Depth(D) - 5.2 5.5 mm

Weight - 470 485 g -

(1)

4 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.

Note (3) 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

Value

Min. Max.

- 180 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Unit Note

Note (4) 10 ~ 500~10 Hz, 0.5 Hr/cycle, 2hr each X, Y, Z,

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

Storage Range

5

Temperature (ºC)

5 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8060 -20 400 20-40

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +4.0 V Logic Input Voltage VIN -0.3 Vcc+0.3 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2.5K V Lamp Current IL 2.0 7.0 mA Lamp Frequency FL 45 80 KHz

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Unit Note

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

(1)

(1), (2), IL = 6.0 mA

RMS

(1), (2)

Approval

Note (2) Specified values are for lamp (Refer to 3.2 for further information).

6 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

3.1 TFT LCD MODULE

Parameter Symbol

Ta = 25 ± 2 ºC

(1)

Value

Min. Typ. Max.

Unit Note

Power Supply Voltage Vcc 3.0 3.3 3.6 V Ripple Voltage VRP - 50 - mV Rush Current I

- 1.0 1.5 A (2)

RUSH

Power Supply Current Icc - 400 500 mA

Logical Input Voltage

“H” Level VIH - - +100 mV “L” Level V

-100 - - mV -

IL

Terminating Resistor RT - 100 - Ohm -

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+3.3V

R1

47K

Q1 2SK1475

FUSE

C3

1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470us

+3.3V

0.9Vcc

0.1Vcc

GND

470us

7 / 21

Version 3.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Lamp Input Voltage VL 580 650 720 V Lamp Current IL 2.0 6.0 7.0 mA

Lamp Turn On Voltage VS

- - 890 (25

- - 1130 (0 Operating Frequency FL 45 60 80 KHz (3) Lamp Life Time LBL 10,000 15,000 - Hrs (5) Power Consumption PL - 3.9 - W (4), IL = 6.0 mA

Note (1) Lamp current is measured by utilizing a high frequency current meter as shown below:

Value

o

C) V

o

C) V

Unit Note

I

RMS

(1)

RMS

(2)

RMS

(2)

RMS

Approval

= 6.0 mA

L

LCD

Module

HV (White)

LV (Black)

1

2

Current Meter

Inverter

A

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the

display, and this may cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronous frequency and its harmonics as far

as possible.

Note (4) P

= IL VL

L

Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition

Ta = 25  2

o

C and IL = 2.0 ~ 6.5 mArms until one of the following events occurs:

(a) When the brightness becomes or lower than 50% of its original value.

(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective

ignition length is defined as an area that has less than 70% brightness compared to the

brightness in the center point.)

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for

the lamp. All the parameters of an inverter should be carefully designed to avoid producing too

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrument.

8 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

)

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

Rxin0(+/-)

Rxin1(+/-)

Rxin2(+/-)

(JAE-FI-XB20S-HF10)

CLK(+/-)

Vcc

GND

V

L

LAMP CONNECTOR

4.2 BACKLIGHT UNIT

INPUT CONNECTOR

REFERENCE VOLTAGE

(JST-BHSR-02VS-1)

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

GENERATOR

SCAN DRIVER IC

TFT LCD PANEL

(1024x3x768)

DATA DRIVER IC

BACKLIGHT UNIT

1 HV (White)

2 LV (Black

9 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Symbol Description Polarity Remark

1 Vcc Power Supply +3.3 V 2 Vcc Power Supply +3.3 V 3 Vss Ground 4 Vss Ground 5 Rxin0- LVDS Differential Data Input Negative 6 Rxin0+ LVDS Differential Data Input Positive 7 Vss Ground 8 Rxin1- LVDS Differential Data Input Negative

9 Rxin1+ LVDS Differential Data Input Positive 10 Vss Ground 11 Rxin2- LVDS Differential Data Input Negative 12 Rxin2+ LVDS Differential Data Input Positive 13 Vss Ground 14 CLK- LVDS Clock Data Input Negative 15 CLK+ LVDS Clock Data Input Positive 16 Vss Ground 17 NC Non-Connection 18 NC Non-Connection 19 Vss Ground 20 Vss Ground -

Note (1) Connector Part No.: JAE-FI-XB20S-HF10 or equivalent

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

R0~R5,G0

G1~G5,B0,B1

B2~B5,DE,Hsync,Vsync

LVDS Leve l

Note (2) User’s connector Part No: JAE-FI-X20M or equivalent

Note (3) The first pixel is even.

5.2 BACKLIGHT UNIT

Pin Symbol Description Color

1 HV High Voltage White 2 LV Ground Black

Note (1) Connector Part No.: JST-BHSR-02VS-1 or equivalent

Note (2) User’s connector Part No.: JST-SM02B-BHSS-1-TB or equivalent

5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL

CLK+

Rxin2

Rxin1

Rxin0

T/7

IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE B5 B4 B3 B2 Vsync Hsync

IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 G4 G3 G2 G1 B0 G5

IN6 IN5 IN4 IN3 IN2 IN1 IN0

G0 R3 R2 R1 R0 R5 R4

Signal for 1 DCLK Cycle (T)

10 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

5.4 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black Red Green

Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue Cyan Magenta Ye ll ow White Red(0)/Dark Red(1) Red(2)

:

: Red(61) Red(62) Red(63) Green(0)/Dark Green(1) Green(2)

:

: Green(61) Green(62) Green(63) Blue(0)/Dark Blue(1) Blue(2)

:

: Blue(61) Blue(62) Blue(63)

0

1

0

1

0

:

1

0

:

0

:

0

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

11 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note Clock Frequency 1/Tc - 65 - MHz Frame Frequency Cycle TV 769 806 1000 lines Vertical Active Display Term Display Period TVD 768 768 768 lines One Line Scanning Time Cycle TH 1200 1344 1612 clocks (1) Horizontal Active Display Term Display Period THD 1024 1024 1024 clocks -

Note (1) The duration of DE signal must be longer than 1 clock period at every horizontal sync. period.

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

INPUT SIGNAL TIMING DIAGRAM

DE

DCLK

DE

DATA

C

T

Tv

TH

Valid display data (1024 pixels)

HD

T

12 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

Power On

www.panelook.com

Power Off

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

Restart

Power Supply

for LCD, Vcc

- Interface Signal

(LVDS Signal of Transmitter), V

- Power for Lamp

Timing Specifications:

0 < t1 Љ 10 msec

0 < t2 Љ 50 msec

0 < t3 Љ 50 msec

0V

I

10%

t4 Њ 1 sec

t5 Њ 200 msec

90%

t1

90%

Valid Data

t6 t5

50%50%

ONOFF OFF

t4

10%

t3 t2

10%

t6 Њ 200 msec

Note (1) Please avoid floating state of interface signal at invalid period.

Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V.

Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the

interface signal is valid. The Backlight inverter power must be turned off before the power supply

for the logic and the interface signal is invalid.

13 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta 25±2 Ambient Humidity Ha 50±10 %RH Supply Voltage VCC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 6.0 mA Inverter Driving Frequency FL 60 KHz Inverter Sumida-H05-4783B

The relative measurement methods of optical characteristics are shown in 7.2. The following items

should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

7.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 150 200 - - (2), (6)

Response Time

Average Luminance of White L White Variation Cross Talk CT - - 4.0 % (5), (6)

Red

Color Chromaticity

Viewing Angle

Green

Blue

White

Horizontal

Ver t ical

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

o

C

TR - 15 30 ms

- 35 50 ms

T

F

120 150 - cd/m2(4), (6)

AVE

ӬW

=0º,ӰY =0º

Rx 0.553 0.583 0.613 -

Ry 0.319 0.349 0.379 Gx 0.280 Gy 0.545 Bx 0.122

By 0.091

Wx 0.280 0.310 0.340 Wy

Ӱx+

-

Ӱ

x

ӰY+

-

Ӱ

Y

Ӱ

x

Viewing Normal Angle

CRЊ10

- 1.4 1.6 - (6), (7)

0.310

0.575

0.152

0.121

0.300 0.330 0.360 40 45 -

40 45 -

10 15 -

30 35 -

0.340 -

0.605 -

0.182 -

0.151 -

Deg.

(3)

(1), (6)

14 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

T

Note (1) Definition of Viewing Angle (Ӱx, Ӱy):

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

ӰX- = 90º

x-

6 o’clock

Ӱ

y- = 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Normal

Ӱx = Ӱy = 0º

Ӱy- Ӱy+

ӰX-

ӰX+

y+

12 o’clock direction

Ӱ

y+ = 90º

ӰX+ = 90º

x+

Contrast Ratio (CR) = L63 / L0

L63: Luminance of gray level 63

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

R

T

R

, TF):

ime

T

F

15 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

A

(

)

A

(

)

(

)

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

Note (4) Definition of Average Luminance of White (L

Measure the luminance of gray level 63 at 5 points

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

L (x) is corresponding to the luminance of the point X at Figure in Note (7).

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA x 100 (%)

B

Where:

Y

= Luminance of measured location without gray level 0 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 0 pattern (cd/m2)

B

(0, 0)

ctive Area

Y

(D/8,W/2)

A, L

Y

(D/2,7W/8)

A, D

Gray 32

Y

D,W

(D/2,W/8)

A, U

(7D/8,W/2)

A, R

AVE

):

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

0, 0

ctive Area

Gray 0

Gray 32

Y

(D/2,W/8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

D,W

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

500 mm

Photometer

(TOPCON BM-5A)

Field of View = 2º

Light Shield Room

(Ambient Luminance < 2 lux)

16 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

Note (7) Definition of White Variation (ӬW):

Measure the luminance of gray level 63 at 5 points

ӬW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

W

W/4

W/2

3W/4

Vertical Line

Horizontal Line

D

D/4 D/2 3D/4

12

X

: Test Point

X=1 to 5

3

5

4

Active Area

17 / 21

Version 3.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

8.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

18 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

9. PACKING

9.1 CARTON

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

9.2 PALLET

19 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following

explanation.

CHI MEI

OPTOELECTRONICS

www.panelook.com

N141X6 -L01 Rev. XX

MADE IN TAIWAN

X X X X X X X Y M D L N N N N

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

E207943

MADE IN TAIWAN

(a) Model Name: N141X6 - L01

(b) Revision: Rev. XX, for example: C1, C2 …etc.

(c) Serial ID: X X

Serial ID includes the information as below:

(a) Manufactured Date: Year: 1~9, for 2001~2009

Day: 1~9, A~Y, for 1

X X X X X Y M D L N N N N

Month: 1~9, A~C, for Jan. ~ Dec.

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Revision

CMO Internal Use

st

to 31st, exclude I , O and U

(b) Revision Code: cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

20 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

10.2 CARTON LABEL

www.panelook.com

Issued Date: Dec.09.’02

Model No.: N141X6 -L01

Approval

21 / 21

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 3.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!



www.panelook.com

奇美電子股份有限公司

CMO N141X6-L01 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual