Page 1
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
A
TFT LCD Approval Specification
MODEL NO.: N133I5 - L01
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Customer: Dell
pproved by:
Note:
記錄 工作 審核 角色 投票
2008-01-11
09:23:28 CST
PMMD
Director
cs_lee(李志聖
Director Accept
/56510/44926)
1 / 29
Version 2.0
Page 2
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DAT A INPUT ASSIGNMENT
5.5 EDID DATA STRUCTURE
6. INTERFACE TIMING ------------------------------------------------------- 17
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
9. PACKING ------------------------------------------------------- 26
9.1 CARTON
9.2 PALLET
10. DEFINITION OF LABELS
10.1 CMO MODULE LABEL
10.2 CMO CARTON LABE
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 10
------------------------------------------------------- 11
------------------------------------------------------- 19
------------------------------------------------------- 23
------------------------------------------------------- 28
2 / 29
Version 2.0
Page 3
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Version Date
2.0
Oct. 26. ‘07 All
Page
(New)
REVISION HISTORY
Section Description
All Approval Specification wa s first issued.
3 / 29
Version 2.0
Page 4
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
1 GENERAL DESCRIPTION
1.1 OVERVIEW
N133I5 - L01 is a 13.3” TFT Liquid Crystal Display module with LED Backlight unit and 40 pins LVDS
interface. This module supports 1280 x 800 WXGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction. The converter module for Backlight is built in.
1.2 FEATURES
- Thin and Light Weight
- WXGA (1280 x 800 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
- RoHS compliance
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
1.3 APPLICA TION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 286.08 (H) x 178.8 (V) mm
Bezel Opening Area (Polarizer Size) 289.5 (H) x 182.2 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 800 pixel Pixel Pitch 0.2235 (H) x 0.2235 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treatment Glare, 3H - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 295.5 296.0 296.5 mm
Horizontal(H, with Bracket) 303.5 304.0 304.5 mm
Module
Size
Vertical(V) 191.5 192.0 192.5 mm
Vertical(V, with PCB) 202.0 202.5 203.0 mm
Depth(D / top side) --- --- 2.94 mm
Depth(D / bottom side) --- --- 3.67 mm
Weight --- 235 245 g
(1)
(1)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions
4 / 29
Version 2.0
Page 5
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2 ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Packing Drop (Non-Operating) PD
Packing Vibration (Non-Operating) PV
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The ambient temperature means the temperature of panel surface.
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Value
Min. Max.
- ISTA Standard cm (3)
NOP
- 1.14 Grms (4)
NOP
Unit Note
Relative Humidity (%RH)
100
90
80
60
40
20
10
Operating
Storage
80 60-20 400 20-40
Temperature (ºC)
Note (3) Follow ISTA standard: Drop 1 corner, 3 sides, 6 faces, each one for 1 time.
Note (4) Follow ISTA standard: 1.14Grms Random frequency1~200Hz, 30min/Bottom, 10min/Top,
10min/Right-Left, 10min/Front-Back.
The fixing condition is shown as item 9. PACKING
:
5 / 29
Version 2.0
Page 6
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 +4.0 V
Logic Input Voltage VIN -0.3 VCC+0.3 V
Value
Min. Max.
Unit Note
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
(1)
6 / 29
Version 2.0
Page 7
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
3 ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 3.0 3.3 3.6 V Permissive Ripple Voltage VRP 50 mV Rush Current I
1.5 A (2)
RUSH
Initial Stage Current IIS 1.0 A (2)
Power Supply Current
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
White 364 400 mA (3)a
Black
Icc
TH(LVDS)
TL(LVDS)
424 460 mA (3)b
+100 mV
-100 mV
LVDS Common Mode Voltage VCM 1.125 1.375 V (5)
LVDS Differential Input Voltage |VID| 100 600 mV (5)
Terminating Resistor RT 100 Ohm
Power per EBL WG P
LED Power Supply V
LED Power Current
Vi=7V 500 581 mA
Vi=21V
- 1.32 - W (4)
EBL
7 12 21 V
BL+
IBL
167 194 mA
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Value
Unit Note
Approval
(5),
=1.2V
V
CM
(5)
=1.2V
V
CM
Note (2) I
I
: the maximum current when VCC is rising
RUSH
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black
+3.3V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470us
0.9Vcc
0V
470us
0.1Vcc
+3.3V
100ms
I
RUSH
I
IS
Vcc
(LCD Module Input)
VCC
ICC
7 / 29
Version 2.0
Page 8
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
|
|
|
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, DC
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Current and f
Note (4) The specified power are the sum of LCD panel electronics input power and the inverter input
a. White Pattern
power. Test conditions are as follows.
(a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
= 60 Hz, whereas a power dissipation check p attern below is displayed.
v
b. Black Pattern
Active Area
= 60 Hz,
v
Active Area
(c) Luminance: 60 nits.
(d) The inverter used is provided from Sumida. Please contact them for detail information. CMO
doesn’t provide the inverter in this product.
Note (5) The parameters of LVDS signals are defined as the following figures.
CM
Single Ended
Differential
V
0V
V
0V
V
VID|
VID
8 / 29
Version 2.0
Page 9
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
LED Life Time L
Note(1) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25
o
±2
C and If = 16 mA until the brightne ss becomes ≦ 50% of its original value.
LED
Min. Typ. Max.
10000 -
Value
Unit Note
- Hrs (1)
9 / 29
Version 2.0
Page 10
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
4 BLOCK DIAGRAM
4.1 TFT LCD MODULE
LVDS Display
Data & Clock
Vcc
GND
Data
EDID
CLK
EDID
V
EDID
INPUT CONNECTOR
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
EDID
EEPROM
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
SCAN DRIVER IC
TFT LCD PANEL
DA TA DRIVER IC
Approval
LED Power & Signal
LED
Converter
BACKLIGHT UNIT
10 / 29
Version 2.0
Page 11
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5 INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Symbol Description Polarity Remark
1 VSS Ground
2 CONNTST Connector test
3
VDD
4
VDD
5
VDD
6 VEDID EDID 3.3V power DDC 3.3V Power
7 TEST Panel Self Test
8 CLK EDID clock DDC Clock
9 DATA EDID data DDC Data
10 VSS Ground (Panel logic, BL logic)
11 VSS Ground (Panel logic, BL logic)
12
NC no connect
13
RIN0-
14
RIN0+
15 VSS0 Ground-LVDS0
16
RIN1-
17
RIN1+
18 VSS1 Ground-LVDS1
19
RIN2-
20
RIN2+
21 VSS2 Ground-LVDS2
22 CLK- - LVDS differential clock input
23 CLK+ + LVDS differential clock input
24 VSS3 Ground-LVDS3
INV_PWM /
25
R_PWM PWM brightness control / Red PWM
26 NC no connect
27 VSS LED Ground
28 VSS LED Ground
29 VSS LED Ground
30 VSS LED Ground
31 NC no connect
32 VBL+ 7V - 20V LED power
33 VBL+ 7V - 20V LED power
34 VBL+ 7V - 20V LED power
35 VBL+ 7V - 20V LED power
36 VBL+ 7V - 20V LED power
37 CONNTST Connector test
38
39
40 VSS Ground
Reserved
Reserved
Logic power 3.3V (Panel logic, BL
logic)
Logic power 3.3V (Panel logic, BL
logic)
Logic power 3.3V (Panel logic, BL
logic)
- LVDS differential data input (R0-R5,
G0)
+ LVDS differential data input
(R0-R5, G0)
- LVDS differential data input (G1-G5,
B0-B1)
+ LVDS differential data input
(G1-G5, B0-B1)
- LVDS differential data input
(B2-B5,HS,VS, DE)
+ LVDS differential data input
(B2-B5,HS,VS, DE)
Green PWM / etc. (SMBus Clk for
Dell)
Blue PWM / etc. (SMBus Data for
Dell)
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Negative
Positive
Negative
Positive
Negative
B2~B5, DE, Hsync, Vsync
Positive
R0~R5,G0
G1~G5, B0, B1
LVDS Level Clock
11 / 29
Version 2.0
Page 12
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Note (1) Connector Part No.: I-PEX 20347-140E-02 or equivalent
Note (2) User’s connector Part No: I-PEX 20345-*40T or equivalent
Note (3) The first pixel is odd as shown in the following figure.
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL
CLK+
Rxin2
Rxin1
Rxin0
T/7
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN6 IN5 IN4 IN3 IN2 IN1 IN0
G0 R3 R2 R1 R0 R5 R4
Signal for 1 DCLK Cycle (T)
12 / 29
Version 2.0
Page 13
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Volt age
Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)
:
:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(61)
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)
:
:
Blue(61)
Blue(62)
Blue(63)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
13 / 29
Version 2.0
Page 14
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5.4 EDID DATA STRUCTURE
The EDID (Extended Display Identification Data) data formats are to support displays as defined in the
VESA Plug & Display and FPDI standards.
Byte #
(decimal)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Byte #
(hex)
Field Name and Comments
0 Header
1 Header
2 Header
3 Header
4 Header
5 Header
6 Header
7 Header
8 EISA ID manufacturer name (“CMO”)
9 EISA ID manufacturer name (Compressed ASCII)
0A ID product code (N133I5-L01) 09
0B ID product code (hex LSB first; N133I5-L01) 13
0C ID S/N (fixed “0”)
0D ID S/N (fixed “0”)
0E ID S/N (fixed “0”)
0F ID S/N (fixed “0”)
10 Week of manufacture (fixed “00H”)
11 Year of manufacture (fixed “00H”)
12 EDID structure version # (“1”)
13 EDID revision # (“3”)
14 Video I/P definition (“digital”)
15 Max H image size (“29cm”)
16 Max V image size (“18cm”)
17 Display Gamma (Gamma = ”2.2”)
18 Feature support (“Active off, RGB Color”)
19 Red/Green (Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0)
1A Blue/White (Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0)
1B Red-x (Rx = “0.613”)
1C Red-y (Ry = “0.358”)
1D Green-x (Gx = ”0.363”)
1E Green-y (Gy = ”0.544”)
1F Blue-x (Bx = ”0.156”)
20 Blue-y (By = ”0.144”)
21 White-x (Wx = ”0.313”)
22 White-y (Wy = ”0.329”)
23 Established timings 1
24 Established timings 2 (1280*800@60Hz)
25 Manufacturer’s reserved timings
26 Standard timing ID # 1
27 Standard timing ID # 1
28 Standard timing ID # 2
29 Standard timing ID # 2
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Value
(hex)
00 00000000
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
00 00000000
0D 00001101
AF 10101111
00 00000000
00 00000000
00 00000000
00 00000000
00 00000000
00 00000000
01 00000001
03 00000011
80 10000000
1D 00011101
12 00010010
78 01111000
0A 00001010
31 00110001
35 00110101
9D 10011101
5B 01011011
5D 01011101
8B 10001011
28 00101000
24 00100100
50 01010000
54 01010100
00 00000000
00 00000000
00 00000000
01 00000001
01 00000001
01 00000001
01 00000001
Value
(binary)
00001001
00010011
14 / 29
Version 2.0
Page 15
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
2A Standard timing ID # 3
2B Standard timing ID # 3
2C Standard timing ID # 4
2D Standard timing ID # 4
2E Standard timing ID # 5
2F Standard timing ID # 5
30 Standard timing ID # 6
31 Standard timing ID # 6
32 Standard timing ID # 7
33 Standard timing ID # 7
34 Standard timing ID # 8
35 Standard timing ID # 8
Detailed timing description # 1 Pixel clock (“71.53MHz”,
36
According to VESA CVT Rev1.1)
37 # 1 Pixel clock (hex LSB first)
38 # 1 H active (“1280”)
39 # 1 H blank (“167”)
3A # 1 H active : H blank (“1280 : 167”)
3B # 1 V active (”800”)
3C # 1 V blank (”24”)
3D # 1 V active : V blank (”800 :24”)
3E # 1 H sync offset (”50”)
3F # 1 H sync pulse width ("33”)
40 # 1 V sync offset : V sync pulse width (”3 : 6”)
# 1 H sync offset : H sync pulse width : V sync offset : V sync
41
width (”50: 33 : 3 : 6”)
42 # 1 H image size (”286 mm”)
43 # 1 V image size (”179 mm”)
44 # 1 H image size : V image size (”286 : 179”)
45 # 1 H boarder (”0”)
46 # 1 V boarder (”0”)
# 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol
47
Negatives
Detailed timing description # 2 Pixel clock (“71.53 MHz”,
48
According to VESA CVT Rev1.1)
49 # 2 Pixel clock (hex LSB first)
4A # 2 H active (“1280”)
4B # 2 H blank (“167”)
4C # 2 H active : H blank (“1280 : 167”)
4D # 2 V active (”800”)
4E # 2 V blank (”24”)
4F # 2 V active : V blank (”800 : 24”)
50 # 2 H sync offset (”50”)
51 # 2 H sync pulse width (”33”)
52 # 2 V sync offset : V sync pulse width (”3 : 6”)
# 2 H sync offset : H sync pulse width : V sync offset : V sync
53
width (”50 : 33 : 3 : 6”)
54 # 2 H image size (”286 mm”)
55 # 2 V image size (”179 mm”)
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
F1 11110001
1B 00011011
00 00000000
A7 10100111
50 01010000
20 00100000
18 00011000
30 00110000
32 00110010
21 00100001
36 00110110
00 00000000
1E 00011110
B3 10110011
10 00010000
00 00000000
00 00000000
1A 00011010
F1 11110001
1B 00011011
00 00000000
A7 10100111
50 01010000
20 00100000
18 00011000
30 00110000
32 00110010
21 00100001
36 00110110
00 00000000
1E 00011110
B3 10110011
15 / 29
Version 2.0
Page 16
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
56 # 2 H image size : V image size (”286 : 179”)
57 # 2 H boarder (”0”)
58 # 2 V boarder (”0”)
59 Module "A" Revision = Example: 00, 01, 02, 03, etc.
5A Detailed timing description # 3
5B # 3 Flag
5C # 3 Rese rved
5D # 3 FE (hex) defines ASCII string (Model Name “N133I5”, ASCII)
5E # 3 Flag
5F # Dell P/N "MC196" 1st character (“G”)
60 # Dell P/N " MC196" 1st character (“R”)
61 # Dell P/N " MC196" 1st character (“5”)
62 # Dell P/N " MC196" 1st character (“4”)
63 # Dell P/N " MC196" 1st character (“9”)
64 LCD Supplier EEDID Revision #: "2"
65 Manufacturer P/N ( "N")
66 Manufacturer P/N ( "1" )
67 Manufacturer P/N ( "3" )
68 Manufacturer P/N ( "3" )
69 Manufacturer P/N ( "I" )
6A Manufacturer P/N ( "5" )
Manufacturer P/N (If <13 char, then terminate with ASCII code
6B
0Ah, set remaining char = 20h)
6C Flag
6D Flag
6E Flag
6F Data Type Tag:
70 Flag
71 SMBUS value @ 10 [cd/m2]=7 07
72 SMBUS value @ 17 [cd/m2]=11 0B
73 SMBUS value @ 24 [cd/m2]=15 0F
74 SMBUS value @ 30 [cd/m2]=18 12
75 SMBUS value @ 60 [cd/m2]=34 22
76 SMBUS value @ 120 [cd/m2]=66 42
77 SMBUS value @ 190 [cd/m2]=105 69
78 SMBUS value @ 300 [cd/m2]=200 C8
79 Numbers of LVDS Recevier chip = 1
7A BIST Enable: Yes = '01' No = '00' ("Yes")
(If <13 char, then terminate with ASCII code 0Ah, set remaining
7B
char = 20h)
(If <13 char, then terminate with ASCII code 0Ah, set remaining
7C
char = 20h)
(If <13 char, then terminate with ASCII code 0Ah, set remaining
7D
char = 20h)
7E Extension flag
7F Checksum
10 00010000
00 00000000
00 00000000
1A 00011010
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
47 01000111
52 01010010
35 00110101
34 00110100
39 00111001
32 00110010
4E 01001110
31 00110001
33 00110011
33 00110011
49 01001001
35 00110101
0A 00001010
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
00000111
00001011
00001111
00010010
00100010
01000010
01101001
11001000
01 00000001
01 00000001
0A 00001010
20 00100000
20 00100000
00 00000000
EB 11101011
16 / 29
Version 2.0
Page 17
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
6 INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The specifications of input signal timing are as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 50 71.53 80 MHz -
Vertical Total Time TV 810 823 2000 TH -
DE
Vertical Addressing Time TVD 800 800 800 TH -
Horizontal Total Time TH 1360 1440 1900 Tc -
Horizontal Addressing Time THD 1280 1280 1280 Tc -
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
DE
DCLK
TC
DE
DATA
6.2 POWER ON/OFF SEQUENCE
INPUT SIGNAL TIMING DIAGRAM
Power On
90%
Power Off
90%
HD
T
Restart
t7
Power Supply
for LCD, Vcc
-L VDS Interface
- Power for LED
0V
0V
10%
10%
t1
t4
t3 t2
Valid Data
t6 t5
50%50%
ONOFF OFF
10%
17 / 29
Version 2.0
Page 18
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Timing Specifications:
0.5< t1 ≦ 10 msec
0 < t2 ≦ 50 msec
0 < t3 ≦ 50 msec
t4 ≧ 500 msec
t5 ≧ 200 msec
t6 ≧ 200 msec
Note (1) Please avoid floating state of interface signal at invalid period.
Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V.
Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the
interface signal is valid. The Backlight inverter power must be turned off before the power supply
for the logic and the interface signal is invalid.
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To
avoid this phenomenon, we suggest that the Vcc falling time had better to follow
t7 ≧ 5 msec
18 / 29
Version 2.0
Page 19
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Y
7 OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta 25±2
Ambient Humidity Ha 50±10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Converter Current If
The measurement methods of optical characteristics are shown in Section 7.2. The following items
should be measured under the test conditions described in Section 7.1 and stable environment shown in
Note (6).
7.2 OPTICAL SPECIFICATIONS
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 500 600 - (2), (5)
Response Time
Average Luminance of White L5p 319 382 cd/m2(4), (5)
Luminance Non-Uniformity
Color Gamut C.G 42 45 - % (5), (7)
Red
Color
Chromaticity
Viewing Angle
Green
Blue
White
Horizontal
Vertical
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
o
C
20
TR - 6 11 ms
- 14 19 ms
T
F
δW5p
δW
13p
=0°, θY =0°
θ
Rx 0.613 Ry
Gx
Gy
Bx
By
Wx 0.313 Wy
θ
+
x
θ
-
x
θ
+
Y
θ
-
x
Viewing Normal
Angle
CR≥10
- - 20 %
- - 35 %
0.358
0.354
TYP
-0.06
0.548
0.152
+0.06
0.145
0.329
50 60
50 60
40 50
50 60
TYP
mA / EA
-
-
-
-
-
-
Deg.
(3)
(5), (6)
(1), (5)
19 / 29
Version 2.0
Page 20
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
.67 ms
Note (1) Definition of Viewing Angle (θx, θy):
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
θX- = 90º
x-
6 o’clock
θ
y- = 90º
y-
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L
L
: Luminance of gray level 63
63
L
: Luminance of gray level 0
0
63
/ L0
Normal
θx = θy = 0º
θy- θy+
θx−
θx+
y+
12 o’clock direction
θ
y+ = 90º
x+
θX+ = 90º
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (T
100%
90%
Optical
Response
10%
0%
T
R
66.67 ms
, TF):
R
66
Time
T
F
20 / 29
Version 2.0
Page 21
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
500
Note (4) Definition of Average Luminance of White (L5p):
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Measure the luminance of gray level 63 at 5 points
L5p = [L (33)+ L (37)+ L (55)+ L (73)+ L (77)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (6)
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
USB2000
CS-1000T
Center of the Screen
mm
Light Shield Room
(Ambient Luminance < 2 lux)
21 / 29
Version 2.0
Page 22
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Note (6) Definition of White Variation (δW5p, δW
Measure the luminance of gray level 63 at 5, 13 points
δW
={1-{ Minimum [L (33) , L (37) , L (55) , L (73) , L (77)] / Maximum [L (33) , L (37) , L (55) , L (73),
5p
L (77)]}} *100%
δW
={1-{ Minimum [L (11)+ L (22)+ L (33)+ L (44)+ L (55)+L (66)+ L (77)+ L (88)+ L (99)+ L (19)+ L
13p
(37)+ L (73)+ L (91)] / Maximum [L (11)+ L (22)+ L (33)+ L (44)+ L (55)+L (66)+ L (77)+ L (88)+ L
(99)+ L (19)+ L (37)+ L (73)+ L (91)]}} *100%
13p
):
Note (7) Definition of color gamut (C.G):
C.G= ∆R G B /∆R
R
, G0, B0 : color coordinates of red, green, and blue defined by NTSC, respectively.
0
R, G, B
∆R
0 G0 B0
0 G0 B0
: color coordinates of module on 63 gray levels of red, green, and blue, respectively.
: area of triangle defined by R0, G0, B0
,*100%
∆R G B: area of triangle defined by R, G, B
CIE 1931
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 0.2 0.4 0.6 0.8
G
0
G
B
B
0
R
0
R
22 / 29
Version 2.0
Page 23
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
8 PRECAUTIONS
8.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not
to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is
very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use
Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for
a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed away thoroug hly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
8.2 STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.
8.3 OPERATION PRECAUTIONS
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This
can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with inverter. Do not disa ssemble the module or insert anything into the Backlight unit.
23 / 29
Version 2.0
Page 24
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
9 PACKAGING
9.1 CARTON
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Figure. 9-1 Packing method
24 / 29
Version 2.0
Page 25
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
9.2 PALLET
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
Figure. 9-2 Packing method
25 / 29
Version 2.0
Page 26
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
10 DEFINITION OF LABELS
10.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and it s definitions are as following explanation.
-
(a) Model Name: N133I5 - L01
(b) Revision: Rev. XX, for example: A1, …, C1, C2 …etc.
(c) Serial ID: X X
(d) Production Location: MADE IN XXXX. XXXX stands for production location.
(e) UL/CB logo: “LEOO” especially stands for panel manufactured by CMO Ningbo satisfying UL/CB
requirement. “LEOO” is the CMO’s UL factory code for Ningbo factory.
Serial ID includes the information as below:
(a) Manufactured Date: Year: 1~9, for 2001~2009
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
X X X X X Y M D X N N N N
10.2 CMO CARTON LABEL
Serial No.
CMO Internal Use
Year, Month, Date
CMO Internal Use
Revision
CMO Internal Use
Month: 1~9, A~C, for Jan. ~ De c.
Day: 1~9, A~Y, for 1
st
to 31st, exclude I , O and U
(a) Production location: Made In XXXX. XXXX stands for production location.
26 / 29
Version 2.0
Page 27
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
10.3 CARTON LABEL
PKG ID (3S)124161241729112345609886C20
Doc. No.: 14072158
Issued Date: Oct. 26, 2007
Model No.: N133I5 - L01
Approval
REV.A06
DP/N 03J849
BOX Qty 20 Made in Taiwan
10.4 PALLET LABEL
FROM :CMO Corporation
Tainan,
Taiwan 744 R.O.C
P.O.NUMBER
12345678
COUNTRY OF ORIGIN
TW
TO:DELL COMPUTER
2128 West Braker
Austin TX
DELL P/N
12345
PACKING LIST#
1234567890123
Vendor ID Loc Id
12416 12416
Mfg Id
70896
PACKING LIST QTY
654321
DESTINATION MAS LOC
DESTINATION LOCATION
B4
12345678901234567890
PKG CNT
999 OF 999 12345
PART DESCRIPTION XXXXXXXXXXXXXXXXXXXXXXXXX
12345678901234567890123456789012345678901
BOX CNT REVISION
A00-00 Apr 29,2003
60
AIRBILL NUMBER
SHIP DATE
27 / 29
Version 2.0
Page 28
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 29
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...