CMO N133B6-L24 Specification

Global LCD Panel Exchange Center

ு଱ழၴ ຝ ᐉு ߡۥ ދป

ข঴ጥ෻๠

楊

竣 傑

TFT LCD Preliminary Specification

MODEL NO.: N133B6-L24

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

Customer :

Approved by :

Note :

NB

2009-12-21

16:09:56

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

2009.12.21

1 / 32

Director Accept

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

- CONTENTS -

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

------------------------------------------------------- 4

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM ------------------------------------------------------- 11

4.1 TFT LCD MODULE

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12

5.1 TFT LCD MODULE

5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.3 COLOR DATA INPUT ASSIGNMENT

5.4 EDID DATA STRUCTURE

6. CONVERTER ------------------------------------------------------- 19

6.1 ABSOLUTE MAXIMUM RATINGS

6.2 RECOMMENDED OPERATING RATINGS

7. INTERFACE TIMING ------------------------------------------------------- 21

7.1 INPUT SIGNAL TIMING SPECIFICATIONS

7.2 POWER ON/OFF SEQUENCE

8. OPTICAL CHARACTERISTICS ------------------------------------------------------- 24

8.1 TEST CONDITIONS

8.2 OPTICAL SPECIFICATIONS

9. PRECAUTIONS ------------------------------------------------------- 27

9.1 HANDLING PRECAUTIONS

9.2 STORAGE PRECAUTIONS

9.3 OPERATION PRECAUTIONS

10. PACKING ------------------------------------------------------- 28

10.1 CARTON

10.2 PALLET

11. DEFINITION OF LABELS

11.1 CMO MODULE LABEL

11.2 CARTON LABEL

------------------------------------------------------- 30

12. MECHANICAL DRAWING

------------------------------------------------------- 32

2 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

REVISION HISTORY

Version Date

Ver. 0.0

Ver. 1.0

Jul.14, 2009

Oct.14, 2009

Page

(New)

All

All

Section Description

All

Tentative spec 0.0 was first issued for N133B6-L24

All

Preliminary spec 1.0 was first issued for N133B6-L24

3 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

N133B6-L24 is a 13.3” (13.3” diagonal) TFT Liquid Crystal Display module with LED Backlight unit and 40

pins LVDS interface. This module supports 1366 x 768 HD mode and can display 262,144 colors. The

optimum viewing angle is at 6 o’clock direction.

1.2 FEATURES

- HD (1366 x 768 pixels) resolution

- 3.3V LVDS (Low Voltage Differential Signaling) interface

- WLED and LED converter embedded

- Flat Type

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

1.3 APPLICATION

- TFT LCD Notebook

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Active Area 293.4168 (H) x 164.9664 (V) (13.3” diagonal) mm
Bezel Opening Area 296.816 (H) x 168.366 (V) mm
Driver Element a-si TFT active matrix - ­Pixel Number 1366 x R.G.B. x 768 pixel ­Pixel Pitch 0.2148 (H) x 0.2148 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally white - ­Surface Treatment Glare, 3H - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H)
With Bracket
Horizontal(H)
W/o Bracket

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V)
With PCB
Vertical(V)
W/o PCB
Thickness(T) - 3.3 3.6 mm

Weight 280 290 g -

313.6 314.1 314.6 mm

305.8 306.3 306.8 mm

188.25 188.75 189.25 mm

177.2 177.7 178.2

(1)

(1)

4 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V

Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC min. and 50 ºC max.

Relative Humidity (%RH)

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

Value

Min. Max.

- 220/2 G/ms (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Unit Note

100

90

80

60

Operating Range

40

20
10

Storage Range

8060-20 40 0 20 -40

Temperature (ºC)

Note (3) 1 time for ± X, ± Y, ± Z. for Condition (220G / 2ms) is half Sine Wave,.

Note (4) 10~500 Hz, 0.5hr/cycle 1cycle for X,Y,Z

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid

enough so that the module would not be twisted or bent by the fixture.

The fixing condition is shown as below:

5 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 +4.0 V
Logic Input Voltage VIN -0.3 VCCS+0.3 V

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

2.2.2 BACKLIGHT UNIT

Item

LED Light Bar Power Supply Voltage -40 26.4 V
LED Light Bar Power Supply Current 0 125 mA

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

www.panelook.com

Value

Min. Max.

Value

Min Max.

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

Unit Note

(1)

Unit Note

DC

DC

(1), (2)

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for LED (Refer to Section 3.2 for further information).

6 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max.
Power Supply Voltage VCCS 3.0 3.3 3.6 V ­Ripple Voltage VRP - 50 - mV ­Inrush Current I

- - 1.5 A (2)

INRUSH

Initial Stage Current IIS - - 1.0 A (2)

Power Supply Current

LVDS Differential Input High Threshold V

LVDS Differential Input Low Threshold V

White - (150) (160) mA (3)a
Black

lcc

TH(LVDS)

-100 - - mV

TL(LVDS)

- (200) (220) mA (3)b

- - +100 mV

LVDS Common Mode Voltage VCM 1.125 - 1.375 V (4)
LVDS Differential Input Voltage |VID| 100 - 600 mV (4)
LVDS Terminating Resistor RT - 100 - Ohm -

CE_EN Input Voltage

CABC_EN Input Voltage

High Level V
Low Level V
High Level V
Low Level V

(2.3) - (3.6) V -

IHCE

(0) - (0.5) V -

ILCE

(2.3) - (3.6) V -

IHCABC

(0) - (0.5) V -

ILCABC

Power per EBL WG PEBL - TBD - W (5)

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

Value

Unit Note

Preliminary

(4),

=1.2V

V

CM

(4)

=1.2V

V

CM

Note (2) I

: the maximum current when VCCS is rising

RUSH

I

: the maximum current of the first 100ms after power-on

IS

Measurement Conditions: Shown as the following figure. Test pattern: black.

(High to Low)

(Control Signal)

SW

+12V

+3.3V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

VCCS

(LCD Module Input)

7 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

|

|

|

|

Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

VCCS rising time is 0.5ms

Current and f

a. White Pattern

Note (4) The parameters of LVDS signals are defined as the following figures.

= 60 Hz, whereas a power dissipation check pattern below is displayed.

v

b. Black Pattern

Active Area

CM

V

Active Area

VID

Single Ended

0V

V

VID

Differential

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

0V

V

8 / 32

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

Note (5) The specified power are the sum of LCD panel electronics input power and the converter input

power. Test conditions are as follows.

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

(a) VCCS = 3.3 V, Ta = 25 ± 2 ºC, f

(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file

“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.

(c) Luminance: 60 nits.

= 60 Hz,

v

9 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.: 400041212

Issued Date: Oct. 14, 2009

Model No.: N133B6-L24

Preliminary

3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC

Parameter Symbol

LED light bar Power
Supply Voltage
LED light bar Power
Supply Current

23.2 24.8 26.4 V

V

L

71.25 75 78.75 mA

I

L

Min. Typ. Max.

Power Consumption PL 1.653 1.86 2.079 W

LED Life Time LBL 15,000 - - Hrs (4)

Note (1) LED light bar configuration is shown as below:

VL,I

Value

Unit Note

dc

(1) Duty 100%

(3)

Duty=100%

L

LED

Light Bar Feedback

Light Bar

Channels

Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter with

current balancing function to drive LED light-bar.

Note (3) P

= IL ×V

L

L

Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at

Ta = 25 ±2

o

C and IL = 15 mA(Per EA) until the brightness becomes Љ 50% of its original value.

10 / 32

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com