CMO M260J3-P01 Specification

Global LCD Panel Exchange Center

ಖᙕ

ՠ܂

ᐉு

ߡۥ

ދป

A

TFT LCD Approval Specification

MODEL NO.: M260J3-P01

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Customer :

pproved by :

Note :



2008-04-24

PMMD

kj_cheng(ᔤ٠୲

Director

17:43:26

CST

Director

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

/56505/54419/14107)

1 / 22

(deputy)



Accept

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

- CONTENTS -

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

------------------------------------------------------- 4

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M260J3-L01)

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 6

3.1 TFT LCD OPEN CELL

4. BLOCK DIAGRAM ------------------------------------------------------- 8

4.1 TFT LCD OPEN CELL

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 9

5.1 TFT LCD MODULE

5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 11

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 13

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

7.3 FLICKER ADJUSTMENT

8. PACKAGING ------------------------------------------------------- 18

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ------------------------------------------------------- 20

9.1 OPEN CELL LABEL

9.2 CARTON LABEL

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL DRAWING

------------------------------------------------------- 21

------------------------------------------------------- 22

2 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

Version Date Section Description

Ver. 2.0 Apr, 15 ’08 - M260J3-P01 Approval Specifications was first issued.

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

3 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M260J3-P01 is a 25.54-inch wide TFT LCD cell with driver ICs and a 30-pins-2ch-LVDS circuit

board. The product supports 1920 x 1200 WUXGA mode and can display up to 16.7M colors. The

backlight unit is not built in.

1.2 FEATURES

- Extra-wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation

- WUXGA (1920 x 1200 pixels) resolution

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- RoHS Compliance

1.3 APPLICATION

- TFT LCD Monitor

- TFT LCD TV

- Workstation & desktop monitor

- Display terminals for AV application

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Diagonal Size 25.54 inch Active Area 550.08 (H) x 343.8 (V) mm (1) Driver Element a-si TFT active matrix - Pixel Number 1920 x R.G.B. x 1200 pixel Pixel Pitch 0.2865 (H) x 0.2865 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Transmissive Mode Normally White - Surface Treatment Hard coating (3H), Anti-glare (Haze 25%) - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note Weight I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

(2) Connector mounting position

The mounting inclination of the connector makes the screen center within ±0.5mm as the horizontal.

- -

865 g -

(2)

+/- 0.5mm

4 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M260J3-L01)

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

Min. Max.

Relative Humidity (%RH)

100

90

Value

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Unit Note

80

60

Operating Range

40

20 10

Storage Range

8060-20 400 20-40

Temperature (ºC)

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

High temperature or humidity may reduce the performance of panel. Please store LCD panel within

the specified storage conditions.

Storage Condition: With packing.

Storage temperature range: 25±5 ºC.

Storage humidity range: 50±10%RH.

Shelf life: 30days

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

Item Symbol

Power Supply Voltage VCC -0.3 +6.0 V (1)

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum

values.

Value

Min Max

Unit Note

5 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 100 mV -

Rush Current I

- -- 5 A (2)

RUSH

White - 0.5 0.6 mA (3)a

Power Supply Current

Black - 0.92 1.1 mA (3)b

Vertical Stripe

lcc

- 0.85 1.02 mA (3)c LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic -- 1.2 -- V

3.2 Vcc Power Dip Condition:

Value

Unit Note

Approval

Vcc

4.5V

4.0V

Td

Dip condition:

Note (1) The module is recommended to operate within specification ranges listed above for normal

function.

Note (2) Measurement Conditions:

+5.0V

R1

47K

msTdVVccV 20,5.40.4 ddd

Q1 2SK1475

FUSE

C3

1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

R2

1K

47K

VR1

C1

1uF

0.01uF

Q2

2SK1470

C2

6 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

GND

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Vcc rising time is 470Ps

Vcc

0.9Vcc

0.1Vcc

470Ps

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f

Hz, whereas a power dissipation check pattern below is displayed.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

B

R

G

B

R

= 60

v

R

B

R R

Active Area

7 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

G

B

R

G

B

R

www.panelook.com

Global LCD Panel Exchange Center

)

4. BLOCK DIAGRAM

4.1 TFT LCD OPEN CELL

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

RXO0(+/-)

RXO1(+/-)

RXO2(+/-)

RXO3(+/-)

RXOC(+/-)

RXE0(+/-)

RXE1(+/-)

RXE2(+/-)

RXE3(+/-)

RXEC(+/-)

NC

Vcc

GND

(Starconn 093G30B0001A

or JAE FI-X30SSL-HF

INPUT CONNECTOR

REFERENCE VOLTAGE

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

SCAN DRIVER IC

TFT LCD PANEL

(1920x3x1200)

DATA DRIVER IC

8 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Basic Colors

Gray Scale Of Red

Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

0

1

0

1

0

:

1

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

Green(0) / Dark Green(1)

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

10 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 50.0 77 83.0 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

NoteΚ(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

Period Tc - 13.0 - ns High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 40 60 63 Hz Tv=Tvd+Tvb Total Tv 1209 1235 1245 Th Display Tvd 1200 1200 1200 Th Blank Tvb Tv-Tvd 35 Tv-Tvd Th Total Th 1030 1040 1075 Tc Th=Thd+Thb Display Thd 960 960 960 Tc Blank Thb Th-Thd 80 Th-Thd Tc -

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

DE

Th

DCLK

T

DE

DATA

C

Thb

hd

T

11 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the

conditions shown in the following diagram.

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Power Supply

for LCD, Vcc

0V

- Interface Signal

(LVDS Signal of Transmitter), V

0V

I

- Power for Lamp

Timing Specifications:

0.5< t1 Љ 10 msec

0 < t2 Љ 50 msec

0 < t3 Љ 50 msec

t4 Њ 500 msec

Power On

90%

10%

Power Off

90%

t1

t3t2

Valid Data

t6t5

50%50%

ONOFF OFF

Restart

10%

t4

t5 Њ 500 msec

t6 Њ 90 msec

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off, the display may, instantly, function abnormally.

(3) In case of

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the module has been fully discharged between power on/off periods.

(5) Interface signal shall not be kept at high impedance when the power is on.

12 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 7.0 mA Inverter Driving Frequency FL 55±5 KHz

Inverter CMO : 27-D017187 Darfon:VK13165101

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following items

should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Color Chromaticity

Center Transmittance T% 8.8 9.9 ---

Contrast Ratio CR

Response Time

Transmittance uniformity

Viewing Angle

Green

Blue

White

Horizontal

Vertical

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

o

25r2

50r10

Rcx 0.648 Rcy

0.331

Gcx 0.278

T

=0q, TY =0q

Gcy Bcx 0.144

Bcy

Standard light source “C”

x

CS-1000T

Typ -

0.03

0.594

0.089

Typ +

0.03

Wcx 0.320

Wcy

=0q, TY =0q

T

x

CS-1000T, CMO BLUʳ

˼˻ʳ˗˕˘˙˗

TR --- 1 6 ms T

F

GT%

T

=0q, TY =0q

x

T

=0q, TY =0q

x

USB2000

600 1000 --- - (1), (3)

Tx+

T

x

TY+

T

Y

-

CRt10

USB2000

0.355

--- 4 9 ms

--- 1.4 1.5

75 85 ---

70 80 --60 70 ---

C

%RH

-

%

-

Deg.

(0),(6)

(1), (8)

(4)

(1), (7)

(1), (2)

(6)

13 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7.3 Flicker Adjustment

(1) Adjustment Pattern: 2H1V checker pattern as follows.

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

(2) Adjustment Method:

Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is adjusted

to the point with least flickering of the whole screen. After making it surely overrun at once, it should be

adjusted to the optimum point.

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are based

on suitable gamma voltages. The calculating method is as following

1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with signal

input. BLU(for M260J3-L01) is supplied by CMO.

2. Calculate cell’s spectrum.

：

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”

14 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable gamma

voltages.

Note (2) Definition of Viewing Angle (Tx, Ty):

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Normal

Tx = Ty = 0º

Ty- Ty

TX- = 90º

6 o’clock

T

y- = 90º

Note (3) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

x-

y-

Tx

Tx

12 o’clock direction

y+

T

y+ = 90º

x+

TX+ = 90º

15 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

.67 ms

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Note (4) Definition of Response Time (T

Gray Level 255

100%

90%

Optical

Response

10%

0%

T

R

, TF):

66.67 ms

Note (5) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point

Gray Level 255

Time

T

F

66

):

C

L

= L (5)

C

L (x) is corresponding to the luminance of the point X at Figure in Note (7).

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 30 minutes in a windless room.

LCD

LCD Panel

USB2000

CS-1000T

Field of View = 1º

Center of the Screen

Light Shield Room

(Ambient Luminance < 2 lux)

16 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (7) Definition of Transmittance Variation (GT%):

Measure the transmittance at 9 points

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

GT% =

Maximum [L (1), L (2),……….L (12), L (9)]

Minimum [L (1), L (2),…… ….L (12), L (9)]

D/10 D/2

1 3

4

W

W/10

W/2

Vertical Line

W/10

Note (8) Definition of Transmittance (T%):

7

Horizontal Line

D

2

5

8

Active Area

D/10

6

9

X

: Test Point

X=1 to 9

Module is without signal input.

Luminance of LCD module

Transmittance =

Luminance of backlight

Ϡ 100%

17 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 13 open cells / 1 Box

(2) Box dimensions: 840 (L) X 575 (W) X 320 (H) mm

(3) Weight: approximately 22Kg (13 open cells per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items

Test Item Test Conditions Note

ISTA STANDARD

Packing Vibration

Random, Frequency Range: 1 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Non Operation

(2) Packing method.

Carton

Carton dimensions: 840(L)x575(W)x315(H)mm Weight

: Approx.22.8Kg(13 panels per carton)

18 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Carton Label

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

19 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMO OPEN CELL LABEL

The barcode nameplate is pasted on each OPEN CELL as illustration for CMO internal control.

Barcode definition:

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

26J31 Model number M260J3-P01=26J31

X Revision code C1:1 ,C2:2……

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 0~12=1~C

XX Module location Tainan, Taiwan=TN

L Module line # 0~12=1~C

YMD

NNNN Serial number Manufacturing sequence of product

-26J31-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

9.2 CARTON LABEL

The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation

20 / 22

(a) Model Name: M260J3 –P01

(b) Carton ID: CMO internal control

(c) Quantities: 13 pcs

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc. No.: Issued Date: Apr. 15, 2008 Model No.: M260J3-P01

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the product during assembly.

(2) To assemble backlight or install module into user’s system can be only in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer.

(3) It is not permitted to have pressure or impulse on the module because the LCD panel will be

damaged.

(4) Always follow the correct power sequence when the product is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the

product when it is operating.

(8) High temperature or humidity may reduce the performance of module. Please store this product within

the specified storage conditions.

(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly.

10.2 SAFETY PRECAUTIONS

(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(2) After the product’s end of life, it is not harmful in case of normal operation and storage.

11. MECHANICAL DRAWING

21 / 22

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

CMO M260J3-P01 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual