CMO M236H1-P07 Specification

Global LCD Panel Exchange Center

ு଱ழၴ ຝ ᐉு ߡۥ ދป

ข঴ጥ෻๠

吳

柏 勳

TFT LCD Approval Specification

MODEL NO.: M236H1-P07

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

Customer : TPV

Approved by :

Note :

2009-10-01

MTR

2009.10.01

Director Accept

10:18:16

1 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

- CONTENTS -

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION ------------------------------------------------------- 4

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASE ON CMO MODULE M236H1-L07)

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 6

3.1 TFT LCD MODULE

3.2 Vcc POWER DIP CONDITION

4. BLOCK DIAGRAM ------------------------------------------------------- 8

4.1 TFT LCD MODULE

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 9

5.1 TFT LCD MODULE

5.2 LVDS DATA MAPPING TABLE

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 11

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 15

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

7.3 FLICKER ADJUSTMENT

8. PACKAGING ------------------------------------------------------- 19

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ------------------------------------------------------- 20

9.1 OPEN CELL LABEL

9.2 CARTON LABEL

10. RELIABILITY TEST ------------------------------------------------------- 21

11. PRECAUTIONS ------------------------------------------------------- 22

11.1 ASSEMBLY AND HANDLING PRECAUTIONS

11.2 SAFETY PRECAUTIONS

11.3 OTHER

12. MECHANICAL DRAWING ------------------------------------------------------- 22

2 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Sep. 21, 2009

REVISION HISTORY

Version Date Section Description

Ver. 2.0 Sep. 21, ’09 - M236H1-P07 Approval Specification was first issued.

Model No.: M236H1-P07

Approval

3 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M236H1-P07 is a 23.6-inch wide TFT LCD open cell with driver ICs and a 30-pins-2ch-LVDS

circuit board. The product supports 1920 x 1080 Full HD mode and can display up to 16.7M colors. The

backlight unit is not built in.

1.2 FEATURES

- Super wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation

- Full HDTV (1920 x 1080 pixels) resolution

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- RoHS Compliance

1.3 APPLICATION

- TFT LCD Monitor

1.4 GENERAL SPECIFICATIONS

Item Specification Unit Note

Diagonal Size 23.547 inch

Active Area 521.28 (H) x 293.22 (V) mm (1)

Driver Element a-Si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

Pixel Pitch 0.2715 (H) x 0.2715 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 16.7M color -

Transmissive Mode Normally White - -

Surface Treatment Hard coating (3H), Anti-glare (Haze 25%) - -

Power Consumption 7.5 Watt (3)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note
Weight
I/F connector mounting
position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

(2) Connector mounting position

(3) Please refer to sec.3.1 for more information of power consumption.

The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.

- -

710 g -

(2)

+/- 0.5mm

4 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M236H1-L07)

Item Symbol

Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta 40 ºC)Љ

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC)

(c) No condensation.

Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

Min. Max.

Value

Approval

Unit Note

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

High temperature or humidity may reduce the performance of panel. Please store LCD panel within the

specified storage conditions.

Storage Condition: With packing

Storage temperature range: 25±5 ºC

Storage humidity range: 50±10%RH

Shelf life: 30days

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

Item Symbol

Power Supply Voltage VCC -0.3 +6.0 V (1)

Logic Input Voltage Vlogic -0.3 +3.6

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum

values.

Value

Min Max

Unit Note

5 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD OPEN CELL Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V ­Ripple Voltage VRP - - 300 mV ­Rush Current I
AC OFF Rush Current Ioff_

- - 3.5 A (2)

RUSH

RUSH

- - 4 A (5)

White - 0.55 0.67 A (3)

Power Supply Current

Black - 1.5 1.9 A (3)
Vertical Stripe

lcc

- 1.18 1.43 A (3)
Power Consumption PLCD - 7.5 9.5 Watt (4)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic -- 1.2 - V
Logic High Input Voltage VIH 2.64 - 3.6 V
Logic Low Input Voltage VIL -0.3 - 0.66 V

Note (1) The product should be always operated within above ranges.

Value

Unit Note

Approval

Note (2) Power On Rush Current Measurement Conditions: (must follow power sequence)

(High to Low)

(Control Signal)

SW

+12V

+5.0V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

Vcc

(LCD Module Input)

Vcc rising time is 470μs

Vcc

0.9Vcc

0.1Vcc

GND

470μs

6 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

≤≤≤

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, Fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

B

R

B

G

B

R

B

G

B

R

R

R

G

G

G

B

B

B

R

R

R R

G

Active Area

Note (4) The power consumption is specified at the pattern with the maximum current.

Note (5) The rush current would happen if system doesn’t follow power sequence.

3.2 Vcc Power Dip Condition:

B

G

Vcc

4.5V

4.0V

Td

Dip condition:

msTdVVccV 20,5.40.4

B

7 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM

4.1 TFT LCD OPEN CELL

RXO0(+/-)

RXO0(+/-)

RXO1(+/-)

RXO1(+/-)

RXO2(+/-)

RXO2(+/-)

RXO3(+/-)

RXO3(+/-)

RXOC(+/-)

RXOC(+/-)

RXE0(+/-)

RXE0(+/-)

RXE1(+/-)

RXE1(+/-)

RXE2(+/-)

RXE2(+/-)

RXE3(+/-)

RXE3(+/-)

RXEC(+/-)

RXEC(+/-)

AGMODE

NC

Vcc

Vcc

GND

GND

INPUT CONNECTOR

INPUT CONNECTOR

(FI-X30SSL-HF)

www.panelook.com

LVDS INPUT /

LVDS INPUT /

TIMING CONTROLLER

TIMING CONTROLLER

DC/DC CONVERTER &

DC/DC CONVERTER &

REFERENCE VOLTAGE

REFERENCE VOLTAGE

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

SCAN DRIVER IC

SCAN DRIVER IC

TFT LCD PANEL

TFT LCD PANEL

(1920x3x1200)

(1920x3x1080)

DATA DRIVER IC

DATA DRIVER IC

8 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC Not connection, this pin should be open.
26 NC Not connection, this pin should be open.
27 NC Not connection, this pin should be open.
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply

Note (1) Connector Part No.: 187066-30091 (P-TWO) or FI-XB30SL-HF10 (JAE)
Note (2) The first pixel is odd.
Note (3) Input signal of even and odd clock should be the same timing.

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

5.2 LVDS DATA MAPPING TABLE

LVDS Channel O0

LVDS Channel O1

LVDS Channel O2

LVDS Channel O3

LVDS Channel E0

LVDS Channel E1

LVDS Channel E2

LVDS Channel E3

LVDS output D7 D6 D4 D3 D2 D1 D0
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA OB7 OB6 OG7 OG6 OR7 OR6
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA EB5 EB4 EB3 EB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA EB7 EB6 EG7 EG6 ER7 ER6

9 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input

for the color. The higher the binary input, the brighter the color. The table below provides the

assignment of color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Basic
Colors

Gray
Scale
Of
Red

Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)

:

:
Red(253)
Red(254)
Red(255)

0

0

1

1

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

:

:

:

:

1

1

1

1

1

1

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

Data Signal

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Green(0) / Dark
Green(1)

Gray
Scale
Of
Green

Gray
Scale
Of
Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(2)

:

:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)

:

:
Blue(253)
Blue(254)
Blue(255)

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

1

1

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

10 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 58.54 74.25 98 MHz ­Period Tc - 13.47 - ns
Input cycle to
cycle jitter
Spread spectrum

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display

Te rm

Note: (1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

modulation range
Spread spectrum
modulation
frequency
High Time Tch - 4/7 - Tc ­Low Time Tcl - 3/7 - Tc ­Setup Time Tlvs 600 - - ps
Hold Time Tlvh 600 - - ps
Frame Rate Fr 50 60 75 Hz Tv=Tvd+Tvb
Total Tv 1115 1125 1136 Th ­Display Tvd 1080 1080 1080 Th ­Blank Tvb 35 45 56 Th ­Total Th 1050 1100 1150 Tc Th=Thd+Thb
Display Thd 960 960 960 Tc ­Blank Thb 90

www.panelook.com

-0.02*Tc - 0.02*Tc ns (1)

T

rcl

clkin_mod

F

F

0.98*Fc - 1.02*Fc MHz

- - 200 KHz

SSM

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

(2)

(3)

140 190 Tc -

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

Tv

TVb

DE

T

h

DCLK

T

DE

DATA

C

Thb

hd

T

11 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

Note (2) The SSCG (Spread spectrum clock generator) is defined as below figures.

12 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (3) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.

LVDS RECEIVER INTERFACE TIMING DIAGRAM

RXCLK+/-

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Tc

Approval

RXn+/-

Tlvs

Tlvh

1T

14

3T

14

5T

14

7T

14

9T

14

11T

14

13T

14

13 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions

shown in the following diagram.

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

- Power Supply

for LCD, Vcc

- Interface Signal

(LVDS Signal of
Transmitter), V

I

- Power for Lamp

Timing Specifications:

0.5< t1 Љ 10 msec

0 < t2 Љ 50 msec

0 < t3 Љ 50 msec

t4 Њ 500 msec

0V

0V

Power On

90%

10%

10%

Restart

t4

10%

Power Off

90%

t1

Valid Data

ONOFF OFF

t7

t3t2

t6t5

50%50%

t5 Њ 450 msec

t6 Њ 90 msec

5 Љ t7 Љ 100 msec

Note:

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off before the backlight turns off, the display may momentarily become abnormal

screen.

(3) In case of VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the module has been fully discharged between power off and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

(6)

CMO won’t take any responsibility for the products which are damaged by the customers not following the

Power Sequence.

(7)

There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To avoid this

symptom, we suggest "Vcc falling timing" to follow "t7 spec".

14 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 7.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Inverter Current I
Inverter Driving Frequency F

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following

items should be measured under the test conditions described in 7.1 and stable environment shown in

Note (6).

www.panelook.com

L

L

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

o

25 ± 2

50 ± 10

7.5 ± 0.5
55 ± 5

C

%RH

mA

KHz

Item Symbol Condition Min. Typ. Max. Unit Note

Rcx 0.650
Rcy

Gcx 0.268
Gcy

Bcx 0.147
Bcy

Wcx 0.313
Wcy

Color

Chromaticity

(CIE 1931)

Center

Transmittance

Red

Green

Blue

White

DBEFD T% 12 13.5 ­Diffuser T% 5.25 6.25 - % (1), (5)

Contrast Ratio CR

Response Time

TR - 0.7 1.5 ms
T

F

Transmittance uniformity δT%

Horizontal

Viewing Angle

Vertical

θx+

θ

x

θY+

θ

Y

θ

=0° , θY =0°

x

CS-1000T

Standard light source “C”

=0° , θY =0°

θ

x

CS-1000T, CMO BLU

θ

=0° , θY =0°

x

θ

=0° , θY =0°

x

USB2000

-

CR≥10

USB2000

-

0.328

Typ -

0.03

0.598

Typ +

0.03

0.111

0.366

800 1200 - - (1), (3)

- 2.3 4.5 ms

- - 1.33 -(1), (7)

75
75

70
70

85 -

85

80
80

-

-

-

-

-

-

-

-

-

-

-

%

Deg.

(0),(6)

(1), (5)

(4)

(1), (2)

(6)

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are based

on suitable gamma voltages. The calculating method is as following

：

1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with signal

input. BLU (for M236H1-L07) is supplied by CMO.

2. Calculate cell’s spectrum.

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”.

Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable gamma

voltages.

15 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (2) Definition of Viewing Angle (θx, θy):

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

Normal

θx = θy = 0º

θy- θy+

θX- = 90º

6 o’clock

θ

y- = 90º

x-

y-

Note (3) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

θx−

θx+

y+

12 o’clock direction

θ

y+ = 90º

x+

θX+ = 90º

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

Note (4) Definition of Response Time (T

Gray Level 255

100%

90%

Optical

Response

10%

0%

66.67ms 66.67ms

R

T

, TF):

R

Gray Level 0

Gray Level 255

T

F

16 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

500

Note (5) Definition of Transmittance (T%):

Module is without signal input.

Transmittance =

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

Luminance of LCD module L(5)

Ϡ 100%

Luminance of backlight LBLU(5)

L (x) and L

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt

BLU(X) are corresponding to the luminance of the point X at Figure in Note (7).

LCD Module

LCD Panel

USB2000

Center of the Screen

temperature change during measuring. In order to stabilize the luminance, the measurement

CS-1000T

Light Shield Room

mm

(Ambient Luminance < 2 lux)

should be executed after lighting Backlight for 40 minutes in a windless room.

Note (7) Definition of Transmittance Variation (δT%):

Measure the transmittance at 9 points

δT% =

Maximum [L (1), L (2),……….L (8), L (9)]

Minimum [L (1), L (2),…… ….L (8), L (9)]

Horizontal Line

D

4

5

Vertical Line

: Test Point

=

8

17 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Active Area

www.panelook.com

Global LCD Panel Exchange Center

7.3 Flicker Adjustment

(1) Adjustment Pattern: 2H1V checker pattern is as follows,

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

(2) Adjustment Method:

Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is

adjusted to the point with least flickering of the whole screen. After making it surely overrun at once, it

should be adjusted to the optimum point.

18 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 24 open cells / 1 Box

(2) Box dimensions: 670 (L) X 575 (W) X 325 (H) mm

(3) Weight: approximately 23.8Kg (24 open cells per box)

8.2 PACKING METHOD

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

LCD Panel

LCD Panel

LCD Panel

The design packing top layer for empty tray

Carton

19 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMO OPEN CELL LABEL

The barcode nameplate is pasted on each OPEN CELL as illustration for CMO internal control.

M236H1-P07

Barcode definition:

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

CM23H17XXXXXLXXLYMDNNNN

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

23H17 Model number M236H1-P07=23H17

X Revision code C1:1 ,C2:2……

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 1,2,~,9,A,B,~,Y,Z

XX Module location Tainan, Taiwan=TN ; Ningbo China=NP

L Module line # 1,2,~,9,A,B,~,Y,Z

YMD

NNNN Serial number Manufacturing sequence of product

-23H17-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

9.2 CARTON LABEL

The barcode nameplate is pasted on each box

as illustration, and its definitions are as following

explanation.

(a) Model Name: M236H1–P07

7

474

(b) Carton ID: CMO internal control

(c) Quantities: 24 pcs

20 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

10. RELIABILITY TEST

Environment test conditions are listed as following table.

Items Required Condition Note

Temperature Humidity Bias (THB)

High Temperature Operation (HTO)

Low Temperature Operation (LTO)

High Temperature Storage (HTS)

Low Temperature Storage (LTS)

Package Vibration Test

Thermal Shock Test (TST)

On/Off Test

Altitude Test

Note (1) The tests are done with LCD modules.

www.panelook.com

Issued Date: Sep. 21, 2009

Ta= 50к, 80%RH, 240hours

Ta= 50к, 50%RH , 240hours

Ta= 0к, 240hours

Ta= 60к, 240hours

Ta= -20к, 240hours

ISTA STANDARD

1.14Grms
Random, Frequency Range: 1 ~ 200 Hz
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)

-20к/30min, 60к/30min, 100 cycles

25к, On/10sec, Off/10sec, 30000 cycles

Operation: 10000 ft/24hours
Non-Operation: 30000 ft/24hours

Model No.: M236H1-P07

Approval

(1)

(2)

(1)

Note (2) The test is done with a package (24 open cells / 1 Box) shown in Section 8.

21 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Sep. 21, 2009

Model No.: M236H1-P07

Approval

11. PRECAUTIONS

11.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the product during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. Dust and oil

may cause electrical short or worsen the polarizer.

(3) It is not permitted to have pressure or impulse on the product because the LCD panel will be

damaged.

(4) Always follow the correct power sequence when the product is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull I / F connector in or out while the module is operating.

(6) Use a soft dry cloth without chemicals for cleaning because the surface of polarizer is very soft and

easily scratched.

(7) It is dangerous that moisture comes into or contacts the product because moisture may damage the

product when it is operating.

(8) High temperature or humidity may reduce the performance of module. Please store this product

within the specified storage conditions.

(9) When ambient temperature is lower than 10ºC, it may reduce display quality. For example, the

response time will become slowly.

11.2 SAFETY PRECAUTIONS

(1) If the liquid crystal material leaks from the panel, it should be kept away from eyes or mouth. In case

of contacting with hands, skin or clothes, it has to be washed away thoroughly with soap.

(2) After the product’s end of life, it is not harmful in case of normal operation and storage.

11.3 OTHER

(1) When fixed patterns are displayed for a long time, remnant image is likely to occur.

12. MECHANICAL DRAWING

22 / 23

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

www.panelook.com

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!