Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
A
TFT LCD Tentative Specification
MODEL NO.: M220Z3-L03
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Customer :
pproved by :
Note :
記錄 工作 審核 角色 投票
2008-05-22
15:14:33 CST
PMMD II
Director
kevin_wu(吳柏勳
Director Accept
/56520/54894)
1 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATI NGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3. 1.1 TFT LCD MODULE
3.1.2 Vcc Power Dip Condition:
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 BACKLIGHT UNIT
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING ------------------------------------------------------- 20
8.1 PACKING SPECIFICATIONS
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 11
------------------------------------------------------- 12
------------------------------------------------------- 15
------------------------------------------------------- 17
8.2 PACKING METHOD
9. DEFINITION OF LABELS
------------------------------------------------------- 23
9.1 CMO MODULE LABEL
10. PRECAUTIONS
10.1 ASSEMBL Y AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS
------------------------------------------------------- 24
------------------------------------------------------- 25
2 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
REVISION HISTORY
Version Date Section Description
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Ver 0.0 Mar,04’08
All M220Z3-L03 Specifications was first issued。
3 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M220Z3-L03 model is a 22 inch wide TFT-LCD module with a 4 LED Light-Bar Backlight Unit and a
30-pin 2ch-LVDS interface. This module supports 1680 x 1050 WSXGA
displays up to 16.7 millions colors. The Converter module for the Backlight Unit is built in.
1.2 FEATURES
- Super wide viewing angle
- High contrast ratio
- Fast response time
- WSXGA
- DE (Data Enable) only mode
+
(1680 x 1050 pixels) resolution
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
+
(16:10 wide screen) mode and
- LVDS (Low Voltage Differential Signaling) interface
- White LED Backlight Unit
- Low power consumption
1.3 APPLICA TION
- Workstation & desktop monitor
- Display terminals for AV application
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Diagonal size 558.68 mm
Active Area 473.76x296.1 mm
Bezel Opening Area 477.7 (H) x 300.1 (V) mm
Driver Element a-Si TFT active matrix - Pixel Number 1680 x R.G.B. x 1050 pixel Pixel Pitch 0.282(H) x 0.282(V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7 millions color Transmissive Mode Normally White - Surface Treat ment Hard coating (3H), AG (Haze 25%) - -
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 493.2 493.7 494.2 mm
Module Size
I/F connector mounting
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 319.6 320.1 320.6 mm
Depth(D) 13 13.5 14 mm
Weight 1850 1900 g
position
The mounting inclination of the connector makes
the screen center within ±0.5 mm as the horizontal.
4 / 25
Version 0.0
(1)
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
LCD Cell Life Time L
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90% RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Value
Min. Max.
- 50 G (3), (5)
NOP
- 1 G (4), (5)
NOP
50,000 - Hrs
CELL
Unit Note
MTBF
based
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
80 60 -20 400 20-40
Note (3) 11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis
Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid
enough to prevent the module from twisting or bending by the fixture.
5 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +5.5 V (1)
2.2.2 BACKLIGHT UNIT
Item
LED Converter Input Voltage LED Converter Input Current (1.4) ADC (1), (2)
Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum
values.
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Value
Min. Max.
Value Unit Note
Min. Typ Max.
(12)
Unit Note
V
DC
Note (2) Specified values are for LE D (Refer to 3.2 for further information).
6 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
3. ELECTRICAL CHARACTERISTICS
3.1.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 250 mV Rush Current I
- -- 3 A (2)
RUSH
White - 630 819 mA (3)a
Power Supply Current
Black - 1170 1521 mA (3)b
= 75Hz,
f
V
Vcc=4.5V
lcc
- 1330 1729 mA (4)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic -- 1.2 -- V
Note (1) The module is recommended to operate within specification ranges listed above for normal
function.
Note (2) Measurement Conditions:
Value
Unit Note
Tentative
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470µs
+5.0V
0.9Vcc
0.1Vcc
GND
470µs
7 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern belo w is displayed.
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Note (4) The specified power supply current is under the conditions at Vcc = 4.5 V, Ta = 25 ± 2 ºC, f
a. White Pattern
Active Area
Hz, whereas a power dissipation check p attern (Black Pattern ) below is displayed.
Black Pattern
b. Black Pattern
Active Area
= 75
v
Active Area
8 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
3.1.2 Vcc Power Dip Condition:
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Vcc
4.0V
4.5V
Td
Dip condition:
3.2 BACKLIGHT UNIT
Parameter Symbol
(LED Converter Input Voltage) VL (12) VDC (Duty 100%)
(LED Converter Input Current) IL (1.4) ADC (Duty 100%)
Enable EN (0.5) (3.3) VDC
Brightness control PWMIN
(LED Light Bar Input Voltage) V
(LED Light Bar Input Current) I
(Power Consumption) PL (16.8) W (2)
(LED Life Tim e) L
Note (1) LED current is measured by utilizing a high frequency current meter as shown below:
msTdVVccV 20,5.40.4 ≤≤≤
Value
Min. Typ. Max.
(3.3) VDC Square Wave
(1) KHz
(33) VDC (1)
LED
(120) mADC (1)
LED
(20000) Hrs (3)
LED
Unit Note
Power on :3.3V,typ.
Power off :0.5V, typ
PWM
Signal
Generator
Note (2) P
Note (3) The lifetime of LED is defined as the time when it continues to operate under the conditions at
= IL ×VL
L
Ta = 25±2
(a) When the brightness becomes ≦ 50% of its original value.
o
C and I = 20 mA(Per EA) until one of the following events occurs:
PWMIN
Power Supply
VL, I
L
Converter
LED
GND
V
LED ILED
X4
LED
Backlight
Module
8
9 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
r
r
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
RXEC(+/-)
Vcc
GND
(STARCONN 093G30-B0001A)
INPUT CONNECTOR
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
SCAN DRIVER IC
TFT LCD PANEL
(1680x3x1050)
DA TA DRIVER IC
Tentative
VL
GND
PWMIN
EN
CONVERTER CONNECTOR
4.2 BACKLIGHT UNIT
V
V
LED ILED
LED ILED
V
V
(
Aces 91208)
LED
Converter
LED light ba
LED ILED
LED ILED
BACKLIGHT UNIT
LED light ba
10 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC Not connectio n, this pin should be open.
26 NC Not connectio n, this pin should be open.
27 NC Not connectio n, this pin should be open.
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply
Note (1) Connector Part No.: 093G30-B0001A(STARCONN) or FI-X30SSL-HF(JAE) or EQUIVALENT.
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Note (2) Mating Connector Part No.:FI-X30H ; FI-X30C* ; FI-X30M* ; FI-X30HL(-T),FI-X30C*L(-T) [JAE]
Note (3) The first pixel is odd.
Note (4) Input signal of even and odd clock should be the same timing.
11 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5.2 LVDS DATA MAPPING TABLE
SELLVDS = Low or Open
L VDS Channel E0
L VDS Channel E1
L VDS Channel E2
L VDS Channel E3
L VDS Channel O0
L VDS Channel O1
L VDS Channel O2
L VDS Channel O3
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA EB5 EB4 EB3 EB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA EB7 EB6 EG7 EG6 ER7 ER6
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA OB7 OB6 OG7 OG6 OR7 OR6
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
12 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5.3 CONVERTER SPECIFICATION
5.3.1 Connector type
Input connector type: Aces 91208
Output connector: Aces 91500-01201
5.3.2 Input connector pin assignment
Input Connector pin assignment:
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Input connector
Aces 91208
Pin Function
V
1
2
3
4
5
6
7
8
9
10
L
V
L
V
L
V
L
GND
GND Ground
GND Ground
GND Ground
PWMIN
EN
Input voltage Power Supply + (12V.typ)
Input voltage Power Supply + (12V.typ)
Input voltage Power Supply + (12V.typ)
Input voltage Power Supply + (12V.typ)
Ground
Brightness control (PWM signal input, 1kHz. Typ, Active-low)
Enable signal (Power of : 3.3V.typ, Power off : 0.5V.typ)
Comments
13 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
5.4 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Basic
Colors
Gray
Scale
Of
Red
Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(0) / Dark
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Volt age, 1: High Level Voltage
Green(1)
Green(2)
:
:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
14 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc 50 59.5 82 MHz -
LVDS Clock
LVDS Data
Vertical Active Display Term
Horizontal Active Display Term
Note：(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be
Period Tc 13.4 16.8 - ns
High Time Tch - 4/7 - T c Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 50 60 76 Hz Tv=Tvd+Tvb
Total Tv 1060 1080 1195 Th Display Tvd 1050 1050 1050 Th Blank Tvb Tv-Tvd 30 Tv-Tvd Th Total Th 890 920 1000 Tc Th=Thd+Thb
Display Thd 840 840 840 Tc Blank Thb Th-Thd 80 Th-Thd Tc -
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
set to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
DE
Th
DCLK
T
C
DE
DATA
Thb
T
hd
15 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the
conditions shown in the following diagram.
Restart
Power On
Power Off
Power Supply
for LCD, Vcc
- Interface Signal
(LVDS Signal of
Transmitter), V
- Power for Lamp
Timing Specifications:
0.5< t1 ≦ 10 msec
0 < t2 ≦ 50 msec
0 < t3 ≦ 50 msec
0V
0V
I
10%
t4 ≧ 500 msec
t5 ≧ 450 msec
90%
90%
10%
t1
t4
t3 t2
Valid Data
t6 t5
50%50%
ONOFF OFF
t6 ≧ 90 msec
16 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 5.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
(LED Light Bar Input Voltage) V
(LED Light Bar Input Current) I
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
be measured under the test conditions described in 7.1 and stable environment shown in Note (6).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Green
Color
Chromaticity
Blue
White
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
25±2
50±10
LED
(120) mADC
LED
θ
=0°, θY =0°
x
CS-1000T
R=G=B=255
Grayscale
(33) VDC
(0.664)
(0.320)
(0.201)
Typ
(–0.05)
(0.673)
(0.153)
Typ
(+0.05)
(0.086)
0.313
0.329
Tentative
o
C
%RH
(1), (5)
Center Luminance of White L
C
Contrast Ratio CR
Response Time
White Variation
Horizontal
Viewing Angle
Vertical
TR --- 1.3 2.2 ms
T
F
δW θ
θ
+
x
-
θ
x
θ
+
Y
θ
-
Y
Note (1) Definition of Viewing Angle (θx, θy):
θ
=0°, θY =0°
x
=0°, θY =0°
x
CR>10
(240) (280) --- cd/m2(4), (5)
700 1000 --- - (2), (6)
--- 3.7 5.8 ms
(3)
--- 1.3 1.42 - (5), (6)
75
75
70
70
85 --85
80
80
---
---
---
Deg. (1), (5)
17 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (7)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (T
Gray Level 255
100%
90%
Optical
Response
10%
, TF):
R
Gray Level 255
Gray Level 0
0%
Time
T
R
66.67m
T
F
66.67m
Note (4) Definition of Luminance of White (L
):
C
Measure the luminance of gray level 255 at center point
18 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
LC = L (7)
L (x) is corresponding to the luminance of the point X at Figure in Note (6).
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
USB2000
Center of the Screen
Gray 0
CS-1000T
Light Shield Room
(Ambient Luminance < 2 lux)
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 9 points
δW = Maximum [L (1) ~ L (9)] / Minimum [L (1) ~ L (9)]
D/10 D/2
1 3
4
W
W/10
W/2
Vertical Line
W/10
7
Horizontal Line
D
2
5
8
D/10
6
9
X
: Test Point
X=1 to 9
X
Active Area
19 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 9 LCD modules / 1 Box
(2) Box dimensions: 585(L) X 315 (W) X 440 (H) mm
(3) Weight: 19.2 Kg (9 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD
Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Non Operation
Figure. 8-1 Packing method
20 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
For ocean shipping
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
For air transport
Figure. 8-2 Packing method
Figure. 8-3 Packing method
9. DEFINITION OF LABELS
21 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and it s definitions are as following explanation.
(a) Model Name: M220Z3-L03
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…et c.
(c) CMO barcode definition:
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
Serial ID: XX
Code Meaning Description
XX CMO internal use XX Revision Cover all the change
X CMO internal use -
XX CMO internal use -
YMD
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence o f product
(d) Customer’s barcode definition:
Serial ID: CM
Code Meaning Description
CM Supplier code CMO=CM
22Z33 Model number M220Z3-L03=22Z33
X Revision code C1=1, C2=2, ….
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan, Taiwan=TN
L Cell line # 1~12=0~C
XX Module location Tainan, Taiwan=TN; Nin gbo China=NP
L Module line # 1~12=0~C
YMD
NNNN Serial number By LCD supplier
-XX-X-XX-YMD-L-NNNN
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
-22Z33-X-X-X-XX-L-XX-L-YMD-NNNN
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V
22 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
10. PRECAUTIONS
10.1 ASSEMBL Y AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight
will be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
10.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washe d away thoroughly with soap.
(2) After the module’s end of life, it is not harmful in case of normal operation and storage.
23 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
24 / 25
Version 0.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.:
Issued Date: Mar. 4, 2008
Model No.: M220Z3-L03
Tentative
25 / 25
Version 0.0
Loading...