Page 1
Global LCD Panel Exchange Center
ಖᙕ
ՠ܂
ᐉு
ߡۥ
ދป
A
TFT LCD Preliminary Specifications
Model No. : M220Z2-L02
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Customer :
pproved by :
Note :
09:34:32 CST
2008-08-25
System
Products
Biz Div.
cy_kung(֞ᐜ
ႆ/52860/֫ᖲ
54060)
Director Accept
1 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.1.1
Vcc Power Dip Condition
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 BACKLIGHT UNIT
5.4 CONVERTER DATA TRANSFER
5.4.1 I
5.4.2 Register Table
5.5 COLOR DATA INPUT ASSIGNMENT
2
C Format
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING ------------------------------------------------------- 20
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
------------------------------------------------------- 22
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 10
------------------------------------------------------- 11
------------------------------------------------------- 15
------------------------------------------------------- 17
------------------------------------------------------- 23
------------------------------------------------------- 24
2 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
REVISION HISTORY
Version Date Section Description
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Ver. 1.0 Jul,09 ‘08
- M220Z2-L02 RGB BLU Module Preliminary Specifications was first issued.
3 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M220Z2-L02 model is a 22 inch wide TFT-LCD module with 4pcs LED light-bar Backlight unit and
LVDS interface. This module supports 1680 x 1050 WSXGA+ mode and displays up to 16.7 millions colors.
The Converter module for the Backlight Unit is built in.
1.2 FEATURES
z 22” wide WSXGA+ TFT LCD Panel
z TN Mode Liquid Crystal
z Super Wide Viewing Angle
z High Color saturation
z High Brightness & Contrast Ratio
www.panelook.com
Doc No.: 4086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
z High Brightness & Contrast Angular Dependent
z Fast LC Response Time
z LVDS (Low Voltage Differential Signaling) interface
z RGB LED Backlight
1.3 APPLICATION
- Workstation & desktop monitor
- Display terminals for AV application
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Diagonal size 558.68 mm
Active Area 473.76x296.1 mm
Bezel Opening Area 477.7 (H) x 300.1 (V) mm
Driver Element a-Si TFT active matrix - Pixel Number 1680 x R.G.B. x 1050 pixel Pixel Pitch 0.282(H) x 0.282(V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7 millions color Transmissive Mode Normally White - Color saturation 104%NTSC - Surface Treatment Hard coating (3H), AG (Haze 25%) - -
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 493.2 493.7 494.2 mm
Module Size
I/F connector mounting
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 319.6 320.1 320.6 mm
Depth(D) -- 21.42 21.92 mm
Weight 2498 g
position
The mounting inclination of the connector makes
the screen center within ±0.5 mm as the horizontal.
4 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(1)
www.panelook.com
Page 5
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
LCD Cell Life Time L
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90% RH Max. (Ta 40 ºC).Љ
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Value
Min. Max.
- 50 G (3), (5)
NOP
- 1 G (4), (5)
NOP
50,000 - Hrs
CELL
Unit Note
MTBF
based
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
8060-20 400 20-40
Note (3) 11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis
Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid
enough to prevent the module from twisting or bending by the fixture.
5 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6 V
Logic Input Voltage VIN -0.3 +4.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
Converter Voltage Vin 21.6 26.4 V (1) , (3)
Converter Current Iin - 1.9 A (1) , (3)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function
operation should be restricted to the conditions described under Normal Operating Conditions.
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
(1) , (2)
Note (2) Testing Environment Temperature = 25ºC , Duty Ratio=1/10, Pulse Width=0.1ms.
Note (3) Specified values are for LED (Refer to 3.2 for further information).
6 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 100 mV Rush Current I
- -- (3) A (2)
RUSH
White - 530 (819) mA (3)a
Power Supply Current
Black - 900 (1521) mA (3)b
Vertical Stripe
lcc
- 850 (1400) mA (3)c
LVDS differential input voltage Vid 200 - 600 mV
LVDS common input voltage Vic -- 1.2 -- V
Note (1) The module should be always operated within above ranges.
Value
Preliminary
Unit Note
Note (2) Measurement Conditions:
+5.0V
R1
47K
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
47K
Q1 2SK 1475
FUSE
Q2
2SK1470
1K
C2
0.01uF
C3
1uF
Vcc
(LCD Module Input)
Vcc rising time is 470Ps
Vcc
0.9Vcc
0.1Vcc
GND
470Ps
7 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
3.1.1 Vcc Power Dip Condition:
Dip condition:
Active Area
Td
Vcc
4.5V
4.0V
msTdVVccV 20,5.40.4 ddd
8 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
Light bar Red LED
Input Voltage
Light bar Red LED
Lamp Current
Light bar Green LED
Input Voltage
Light bar Green LED
Lamp Current
Light bar Blue LED
Input Voltage
Light bar Blue LED
Lamp Current
LED Life Time LBL 30000 --- --- Hrs (2)
Power Consumption PO --- 33.42 --- W (3)
Note (1) LED current is measured by utilizing a high frequency current meter as shown below:
--- 29 37 VDC (Duty 100%)
R
Out
-- 300 -- mADC (Duty 100%)
I
R
--- 48 52 VDC (Duty 100%)
G
Out
-- 300 -- mADC (Duty 100%)
I
G
--- 43 47 VDC (Duty 100%)
B
Out
-- 240 -- mADC (Duty 100%)
I
B
Min. Typ. Max.
Value
Unit Note
Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at
Ta = 25 ±2 к and I = 60 mA(Per EA) until the brightness becomes 50% of its original value.Љ
Note (3) P
Ta = 25 ± 2 ºC
= IR × R
O
Power Supply
+ IG x G
out
+ IB x B
out
out
Input Power
Vi, Ii
GND
Pi
Converter
Output Power
Po
Vo, Io
Light Bar
Paralles:12
Series:13
9 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
A
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
RXEC(+/-)
GMODE
Vcc
GND
INPUT CONNECTOR
(FI-X30SSL-HF)
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
CONVERTER CONNECTOR
(Connector, 87213-XX0XX, 1.0mm, WTB, 10pin, Aces)
LVDS INPUT /
Converter
SCAN DRIVER IC
TFT LCD PANEL
(1680x3x1050)
DATA DRIVER IC
LED BACKLIGHT
UNIT
COLOR SENSOR
4.2 BACKLIGHT UNIT
LED drive out
LEDx Return
LED drive out
LEDx Return
LED drive out
LEDx Return
LED drive out
LEDx Return
10 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC Not connection, this pin should be open.
26 AGMODE AGMODE should be tied to ground or open.
27 VCC +5.0V power supply
28 VCC +5.0V power supply
29 VCC +5.0V power supply
30 VCC +5.0V power supply
Note (1) Connector Part No.: 093G30-B0001A(STARCONN) or FI-X30SSL-HF(JAE) or EQUIVALENT.
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Note (2) The first pixel is odd.
Note (3) Input signal of even and odd clock should be the same timing.
11 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
5.2 LVDS DATA MAPPING TABLE
LVDS Channel O0
LVDS Channel O1
LVDS Channel O2
LVDS Channel O3
LVDS Channel E0
LVDS Channel E1
LVDS Channel E2
LVDS Channel E3
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA OB7 OB6 OG7 OG6 OR7 OR6
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA EB5 EB4 EB3 EB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA EB7 EB6 EG7 EG6 ER7 ER6
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
5.3 BACKLIGHT UNIT(Converter connector pin)
Pin Symbol Description Remark
1 V
2 Vin Converter input voltage 24V
3 Vin Converter input voltage 24V
4 5V MCU input voltage 5V
5 V
6 V
7 V
8 EN Enable pin 3.3V
9 SCL I2C clock pin
10 SDA I2C bi-directional data pin
Note (1) Connector Part No.: SM10B-SRSS-TB (JST), 87213-1000G(ACES) or equivalent
Note (2) User’s connector Part No.: SHR-10V-S-B (JST), 87214-1000 (ACES) or equivalent
in
Converter ground Ground
GND
Converter ground Ground
GND
Converter ground Ground
GND
Converter input voltage 24V
12 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
5.4 CONVERTER DATA TRANSFER( via I2C interface) :
5.4.1 I
Byte Write:
2
C Format
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
A7 A6 A5 A4 A3 A2 A1
S
W A
Slave Address + W
Byte Read:
S A7 A6 A5 A4 A3 A2 A1
Slave Address + W
D7 D6 D5 D4 D3 D2 D1 D0AS A7A6A5A4A3A2A1 RAD7 D6 D5 D4 D3 D2 D1 D0AP
W
A
Slave AddressΚ38H
ΚWrite (0)
W
RΚRead (1)
2
SΚI
C Start Bit
AΚAcknowledge
ΚNot Acknowledge
A
2
I
C SCL clock frequencyΚ100KHz
D7 D6 D5 D4 D3 D2 D1 D0
D7 D6 D5 D4 D3 D2 D1 D0
A
Register Address Data
Register Address DataSlave Address + R
P
A
5.4.2 Register Table
Symbol Register Definition R/W Default Note
CTRL 01 Bit[7] Reserved
BRIGHT 02 Brightness Value R/W FFH 00H ~ FFH
CT 03 Color Temperature Value, (CT*100) oK R/W 41H 6500
CTXL 04 Color temperature CIE X [7:0] R/W 01H 10 bits
CTXH 05 Color temperature CIE X [9:8] R/W 39H X = 313
CTYL 06 Color temperature CIE Y [7:0] R/W 01H 10 bits
CTYH 07 Color temperature CIE Y [9:8] R/W 49H Y = 329
NITSL 08 Brightness Display [7:0] R
NITSH 09 Brightness Display [15:8] R
Bit[6] Reserved
Bit[5] Reserved
Bit[4] Reserved
Bit[3] 1: Open loop, 0: Close loop
Bit[2] 1: PWM enable, 0:PWM disable
Bit[1] 1: HW Reset (Avago power restart)
0: Reset finished
Bit[0] 1: SW Reset, 0: Reset finished
R/W 00H
o
K(Kelvin)
13 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
5.5 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Basic
Colors
Gray
Scale
Of
Red
Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(0) / Dark
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Green(1)
Green(2)
:
:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
14 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc 50 59.5 82 MHz -
LVDS Clock
LVDS Data
Vertical Active Display Term
Horizontal Active Display Term
NoteΚ(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be
Period Tc 13.4 16.8 - ns
High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 50 60 76 Hz Tv=Tvd+Tvb
Total Tv 1060 1080 1195 Th Display Tvd 1050 1050 1050 Th Blank Tvb Tv-Tvd 30 Tv-Tvd Th Total Th 890 920 1000 Tc Th=Thd+Thb
Display Thd 840 840 840 Tc Blank Thb Th-Thd 80 Th-Thd Tc -
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
set to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
15 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
d
d
d
d
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the
conditions shown in the following diagram.
CC
Power Supply
0.9 V
0.9 V
CC
V
0.5 ms
T2 d 50 ms
0
T3 d 50 ms
0
500ms
CC
T1 d10 ms
T4
0V
Signals
0V
Backlight (Recommended)
450msdT5
90msdT6
0.1V
CC
T
1
2
T
Power On
50%
T
5
Power ON/OFF Sequence
VALI D
50%
DD
0.1V
T
3
4
T
P
T
6
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation of the LCD turns off, the display may, instantly, function abnormally.
(3) In case of
(4) T4 should be measured after the module has been fully discharged between power on/off periods.
(5) Interface signal shall not be kept at high impedance when the power is on.
VCC = off level, please keep the level of input signals on the low or keep a high impedance.
16 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 5.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current - - -
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Green
Color
Chromaticity
Blue
White
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
www.panelook.com
T
=0q, TY =0q
x
CS-1000T
R=G=B=255
Grayscale
25r2
50r10
Typ –
0.03
0.693
0.296
0.164
0.693
0.148
0.083
0.313
0.329
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
o
C
%RH
Typ +
0.03
(1), (5)
Center Luminance of White L
C
Contrast Ratio CR
Response Time
White Variation
Horizontal
Viewing Angle
Vertical
TR --- 1.3 6.3 ms
T
F
GW T
Tx+
T
-
x
TY+
-
T
Y
Note (1) Definition of Viewing Angle (Tx, Ty):
T
=0q, TY =0q
x
=0q, TY =0q
x
CR>10
200 250 --- cd/m2(4), (5)
700 1000 --- - (2), (6)
--- 3.7 8.7 ms
(3)
--- 1.3 1.5 - (5), (6)
75
75
70
70
85 --85
80
80
---
---
---
Deg. (1), (5)
17 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Note (3) Definition of Response Time (T
100%
90%
Gray Level 255
Optical
Response
10%
0%
T
R
66.67ms
, TF):
R
Gray Level 0
Gray Level 255
Time
T
F
66.67ms
Note (4) Definition of Luminance of White (L
):
C
Measure the luminance of gray level 255 at center point
L
= L (5)
C
L (x) is corresponding to the luminance of the point X at Figure in Note (6).
18 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 40 minutes in a windless room.
LCD Module
LCD Panel
USB2000
Field of View = 2º
Center of the Screen
Gray 0
CS-1000T
Light Shield Room
(Ambient Luminance < 2 lux)
Note (6) Definition of White Variation (GW):
Measure the luminance of gray level 255 at 13 points
GW = Maximum [L (1) ~ L (13)] / Minimum [L (1) ~ L (13)]
˄˃
ˉ
˛˂ˇ
˅ˆ
˛
ˌ
ˇˈ
ˊ
˄
ˋ
˄˃
˛˂ˇ ˛˂ˇ ˛˂ˇ
˄˄ ˄˅
˄˃ ˄˃
˄˃
˪˂ˇ ˪˂ˇ ˪˂ˇ ˪˂ˇ
˪
˄ˆ
19 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 6 LCD modules / 1 Box
(2) Box dimensions: 595(L) X 330 (W) X 440 (H) mm
(3) Weight: 16.50 Kg (6 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD
Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Non Operation
Figure. 8-1 Packing method
20 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
For ocean shipping
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
For air transport
Figure. 8-2 Packing method
Figure. 8-3 Packing method
21 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
(a) Model Name: M220Z2-L02
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMO barcode definition:
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
Serial ID: XX
Code Meaning Description
XX CMO internal use -
XX Revision Cover all the change
X CMO internal use -
XX CMO internal use -
XXX Year, month, day
X Product line # Line 1=1, Line 2=2, Line 3=3, …
XXXX Serial number Manufacturing sequence of product
(d) Customer’s barcode definition:
Serial ID: CM
Code Meaning Description
CM Supplier code CMO=CM
22Z22 Model number M220Z2-L02=22Z22
X Revision code Non ZBD: 0~9, ZBD: A~Z
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan, Taiwan=TN
L Cell line # 1~12=0~C
XX Module location Tainan, Taiwan=TN
L Module line # 1~12=0~C
YMD
NNNN Serial number By LCD supplier
-XX-X-XX-XXX-X-XXXX
Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
-22Z22-X-X-X-XX-L-XX-L-YMD-NNNN
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V
22 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 44086116
Issued Date: Jul. 09, 2008
Model No.: M220Z2-L02
Preliminary
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight
will be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
10.2 SAFETY PRECAUTIONS
(1) Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
23 / 25
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Page 25
Loading...