CMO M220Z1-L02 Specification

A

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

TFT LCD Tentative Specification

MODEL NO.: M220Z1-L03

Customer :

pproved by :

Note :

Liquid Crystal Display Division

QRA Division. OA Head Division.

Approval Approval

1 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING ------------------------------------------------------- 20

8.1 PACKING SPECIFICATIONS

------------------------------------------------------- 3

------------------------------------------------------- 4

------------------------------------------------------- 5

------------------------------------------------------- 11

------------------------------------------------------- 12

------------------------------------------------------- 15

------------------------------------------------------- 17

8.2 PACKING METHOD

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

------------------------------------------------------- 23

10. PRECAUTIONS

10.1 ASSEMBL Y AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

------------------------------------------------------- 24

11. MECHANICAL CHARACTERISTICS

------------------------------------------------------- 25

2 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

REVISION HISTORY

Version Date Section Description

Ver 0.0 Aug,31 ‘06

All M220Z1-L03 Specifications was first issued。

3 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M220Z1-L03 model is a 22 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin
2ch-LVDS interface. This module supports 1680 x 1050 WSXGA+ (16:10 wide screen) mode and displays
up to 16.7 millions colors. The inverter module for the Backlight Unit is not built in.

1.2 FEATURES

- Super wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation (EBU Like Specifications)

- WSXGA

+

(1680 x 1050 pixels) resolution

Tentative

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

1.3 APPLICA TION

- Workstation & desktop monitor

- Display terminals for AV application

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Diagonal size 558.68 mm
Active Area 473.76x296.1 mm
Bezel Opening Area 477.7 (H) x 300.1 (V) mm
Driver Element a-Si TFT active matrix - ­Pixel Number 1680 x R.G.B. x 1050 pixel ­Pixel Pitch 0.282(H) x 0.282(V) mm ­Pixel Arrangem ent RGB vertical stripe - ­Display Colors 16.7 millions color ­Transmissive Mode Normally White - ­Surface Treat ment Hard coating (3H), AG (Haze 25%) - -

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 493.2 493.7 494.2 mm

Module Size

I/F connector mounting

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 319.6 320.1 320.6 mm
Depth(D) 16 16.5 17 mm

Weight 2900 g

position

The mounting inclination of the connector makes

the screen center within ±0.5 mm as the horizontal.

(1)

4 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V

LCD Cell Life Time L

Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90% RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.

- 50 G (3), (5)

NOP

- 1 G (4), (5)

NOP

50,000 - Hrs

CELL

Min. Max.

Value

Unit Note

MTBF
based

Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

10

-40 40-20 200 60 80

Storage Range

Temperature (ºC)

Note (3) 11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis
Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid

enough to prevent the module from twisting or bending by the fixture.

5 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply V oltage Vcc -0.3 +5.5 V
Logic Input Voltage VIN -0.3 +4.3 V

Min. Max.

Value

Unit Note

(1)

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2.5K V
Lamp Current IL 3.0 8.0 mA
Lamp Frequency FL 40 80 KHz

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum

values.

Min. Max.

Value

Unit Note

(1), (2), IL = 7.0 mA

RMS

RMS

(1), (2)

Tentative

Note (2) Specified values are for lam p (Refer to 3.2 for further information).

6 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max.
Power Supply V oltage Vcc 4.5 5.0 5.5 V ­Ripple Voltage VRP - -- 100 mV ­Rush Current I

- -- 3 A (2)

RUSH

White - 630 819 mA (3)a

Power Supply Current

Black - 1170 1521 mA (3)b

= 75Hz,

f

V

Vcc=4.5V

lcc

- - 1330 mA (4)

LVDS differential input voltage Vid -100 - +100 mV
LVDS common input voltage Vic -- 1.2 -- V

Note (1) The module is recommended to operate within specification ranges listed above for normal

function.

Note (2) Measurement Conditions:

Value

Unit Note

+5.0V

R1

47K

Q1 2SK1475

FUSE

C3
1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470µs

+5.0V

0.9Vcc

0.1Vcc

GND

470µs

7 / 26

Version 0.0

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

Note (4) The specified power supply current is under the conditions at Vcc = 4.5 V, Ta = 25 ± 2 ºC, f

a. White Pattern

Active Area

Hz, whereas a power dissipation check pattern (Black Pattern) below is displayed.

Black Pattern

b. Black Pattern

Active Area

= 75

v

Active Area

8 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

3.2 BACKLIGHT UNIT

Parameter Symbol

Min. Typ. Max.
Lamp Input Voltage VL 738 820 902 V
Lamp Current IL 3 7.0 8 mA

Lamp Turn On Voltage VS

- - 1560(25°C) V

- - 1800(0°C) V
Operating Frequency FL 40 60 80 KHz (3)
Lamp Life Time LBL 50000 - Hrs (5) IL = (7.0) mA
Power Consumption PL - 22.96 - W (4), IL = (7.0) mA

Note (1) Lamp current is measured by utilizing high-frequency current meters as shown below:

LCD
Module

HV (Pink)

LV (White)

HV (Blue)
LV (Black)

Value

1

2

A

Inverter

Unit Note

IL = (7.0) mA

RMS

(1)

RMS

(2)

RMS

(2)

RMS

A

Current Meter
YOKOGAWA 2016

1

2

A

Tentative

Ta = 25 ± 2 ºC

Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second

after startup. Otherwise, the lamp may not be turned on normally.

Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the

display, which might cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronization frequency and its harmonics

as far as possible.
Note (4) P
Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

= IL ×VL X 4CCFLs

L

condition Ta = 25 ±2

o

C and IL = 7 mArms until one of the following events occurs:
(a) When the brightness becomes or lower than 50% of its original value.
(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective

ignition length is defined as an area that has less than 70% brightness compared to the
brightness in the center point.)

inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter
for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too
much current leakage from high voltage output of the inverter. When designing or ordering the
inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the
inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module
should be operated in the same manners when it is installed in your instrume nt.

9 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

The output of the inverter must have symmetrical (negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interface with horizontal synchronous frequency and as a result this may cause beat on the
display. Therefore lamp frequency shall be as away possible from the horizontal synch ronous
frequency and from its harmonics in order to prevent interference.

Requirements for a system inverter design, which is intended to have a better display performance, a
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its
leakage current.

a. The asymmetry rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within √2 ± 10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities.

* Asymmetry rate:

I p

I -p

| I p – I –p | / I

* Distortion rate
I

(or I –p) / I

p

rms

rms

* 100%

10 / 26

Version 0.0

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
RXEC(+/-)
SELLVDS

Vcc

GND

(STARCONN 093G30-B0001A)

INPUT CONNECTOR

VL

LAMP CONNECTOR

(JST-BHSR-02VS-1)

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

SCAN DRIVER IC

TFT LCD PANEL

(1680x3x1050)

DA TA DRIVER IC

BACKLIGHT UNIT

4.2 BACKLIGHT UNIT

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

11 / 26

Version 0.0

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd)

10 RXO3- Negative LVDS differential data input. Channel O3(odd)

11 RXO3+ Positive LVDS differential data input. Chann el O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 TEST Test pin should be tied to ground or op en.
26 NC Not connection.
27 SELLVDS SELLVDS pin should be tied to ground or ope n.
28 VCC +5.0V power supply
29 VCC +5.0V power supply
30 VCC +5.0V power supply

Note (1) Connector Part No.: 093G30-B0001A(STARCONN) or FI-XB30SSL-HF(JAE) or EQUIVALENT.

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

Note (2) Mating Connector Part No.:FI-X30H ; FI-X30C* ; FI-X30M* ; FI-X30HL(-T),FI-X30C*L(-T) [JAE]
Note (3) The first pixel is odd.
Note (4) Input signal of even and odd clock should be the same timing.

12 / 26

Version 0.0

SELLVDS = Low or Open
L VDS Channel E0

L VDS Channel E1

L VDS Channel E2

L VDS Channel E3

L VDS Channel O0

L VDS Channel O1

L VDS Channel O2

L VDS Channel O3

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

LVDS output D7 D6 D4 D3 D2 D1 D0
Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA EB5 EB4 EB3 EB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA EB7 EB6 EG7 EG6 ER7 ER6
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA OB7 OB6 OG7 OG6 OR7 OR6

13 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

5.2 BACKLIGHT UNIT

Pin Symbol Description Remark

1 HV High Voltage Pink
2 LV Low Voltage White
1 HV High Voltage Blue
2 LV Low Voltage Black

Note (1) Connector Part No.: JST-BHSR-02VS-1 or equivalent
Note (2) User’s connector Part No.: JST-SM02B-BHSS-1-TB (JST) or equivalent

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.

Data Signal

Basic
Colors

Gray
Scale
Of
Red

Color

Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)

:

:
Red(253)
Red(254)
Red(255)

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

0

0

1

1

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

:

:

:

:

1

1

1

1

1

1

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

Tentative

0

0

0

0

0

0

1

1

1

1

1

1

0

0

1

1

0

0

0

0

0

0

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

Green(0) / Dark

Gray
Scale
Of
Green

Gray
Scale
Of
Blue

Note (1) 0: Low Level Volt age, 1: High Level Voltage

Green(1)
Green(2)

:

:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)

:

:
Blue(253)
Blue(254)
Blue(255)

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

14 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 50 59.5 82 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

Note：(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

Period Tc 13.4 16.8 - ns
High Time Tch - 4/7 - Tc ­Low Time Tcl - 3/7 - Tc ­Setup Time Tlvs 600 - - ps ­Hold Time Tlvh 600 - - ps ­Frame Rate Fr 50 60 76 Hz Tv=Tvd+Tvb
Total Tv 1060 1080 1195 Th ­Display Tvd 1050 1050 1050 Th ­Blank Tvb Tv-Tvd 30 Tv-Tvd Th ­Total Th 890 920 1000 Tc Th=Thd+Thb
Display Thd 840 840 840 Tc ­Blank Thb Th-Thd 80 Th-Thd Tc -

Tentative

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

15 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the
conditions shown in the following diagram.

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off, the display may, instantly, function abnormally.

(3) In case of

(4) T4 should be measured after the module has been fully discharged between power on/off periods.

(5) Interface signal shall not be kept at high impedance when the power is on.

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

16 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha

25±2

50±10
Supply Volt age VCC 5.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Inverter Current IL 7.0 mA
Inverter Driving Frequency FL 61 KHz
Inverter SUMIDA H05 5307

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

0.649

0.336

0.284

0.608

0.152

0.078

0.313

0.329

Typ +

0.03

Color
Chromaticity

Red

Green

Blue

White

Rx
Ry
Gx
Gy

Bx
By

Wx
Wy

=0°, θY =0°

θ

x

CS-1000T

R=G=B=255

Grayscale

Typ –

0.03

o

C

%RH

(1), (5)

Center Luminance of White L

C

Contrast Ratio CR
Response Time

White Variation

Horizontal

Viewing Angle

Vertical

TR --- 1.3 2.2 ms
T

F

δW θ

θ

+

x

θ

-

x

θ

+

Y

θ

-

Y

Note (1) Definition of Viewing Angle (θx, θy):

=0°, θY =0°

θ

x

=0°, θY =0°

x

CR>10

250 300 --- cd/m2(4), (5)
700 1000 --- - (2), (6)

--- 3.7 5.8 ms

(3)

--- 1.3 1.42 - (5), (6)
75

75
70

70

85 --­85
80
80

---

---

---

Deg. (1), (5)

17 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (7)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

, TF):

R

18 / 26

Version 0.0

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 255 at center point
L

= L (7)

C

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

USB2000

Field of View = 2º

Center of the Screen

Gray 0

CS-1000T

Light Shield Room
(Ambient Luminance < 2 lux)

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 13 points

δW = Maximum [L (1) ~ L (13)] / Minimum [L (1) ~ L (13)]

19 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

Horizontal Line

: Test Point

X

Vertical Line

X=1 to 13

Active Area

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 5 LCD modules / 1 Box
(2) Box dimensions: 595(L) X 330 (W) X 440 (H) mm
(3) Weight: 16.5 Kg (5 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD
Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)

Non Operation

20 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

For ocean shipping

Figure. 8-1 Packing method

21 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

For air transport

Figure. 8-2 Packing method

Figure. 8-3 Packing method

22 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

(a) Model Name: M220Z1-L03
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMO barcode definition:

Serial ID: XX

Code Meaning Description

XX CMO internal use ­XX Revision Cover all the change

X CMO internal use -

XX CMO internal use -

YMD

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

22Z13 Model number M220Z1-L03=22Z13

X Revision cod e C1=1, C2=2, ….
X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 1~12=0~C

XX Module location Tainan, Taiwan=TN; Ningbo China=CN

L Module line # 1~12=0~C

YMD

NNNN Serial number By LCD supplier

-XX-X-XX-YMD-L-NNNN

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

-22Z13-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V

23 / 26

Version 0.0

Issued Date: Aug. 31, 2006

Model No.: M220Z1-L03

Tentative

10. PRECAUTIONS

10.1 ASSEMBL Y AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight

will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disa ssemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washe d away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

24 / 26

Version 0.0