CMO M216H1-L01 Specification

Global LCD Panel Exchange Center

ಖᙕ

ՠ܂

ᐉு

ߡۥ

ދป

TFT LCD Approval Specification

MODEL NO.: M216H1-L01

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Customer : Samsung

Approved by :

Note :



2009-03-26

PMMD II



kevin_wu(ܦᕬ



Director Accept

13:47:13 CST

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Director

/56520/54894)

1 / 25



www.panelook.com

Global LCD Panel Exchange Center

REVISION HISTORY

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

- CONTENTS -

------------------------------------------------------- 3

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

------------------------------------------------------- 4

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7

3.1 .1 TFT LCD MODULE

3.1. 2 Vcc POWER DIP CONDITION

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM ------------------------------------------------------- 11

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12

5.1 TFT LCD MODULE

5.2 LVDS DATA MAPPING TABLE

5.3 BACKLIGHT UNIT

5.4 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 15

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 17

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING ------------------------------------------------------- 20

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL CHARACTERISTICS

------------------------------------------------------- 22

------------------------------------------------------- 23

------------------------------------------------------- 24

2 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

Version Date Section Description

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Ver 3.0

Ver 3.1

Sep,23,08’

Feb.11, ‘09

All

2.2.2

3.2

8.0

10.3

10.4

M216H1-L01 Specifications was first issuedΖ

Delete F

Modify Note (2) Add description ( It the value output voltage of NF circuit) Modify Note (5)

center point.)

Change Box dimensions:

Original:

New:

Min:40 Max 60 KHz ,Note (3),(4)

L

(a) When the brightness becomes 50% of its original value.Љ (b) When the effective ignition length becomes 80% of iЉ ts original value. (The effective ignition length is a scope that luminance is over 80% of that at the

(2) Box dimensions: 563(L) X 408 (W) X 375 (H) mm (3) Weight: 26.5 Kg (10 modules per box)

(2) Box dimensions: 563(L) X 390 (W) X 375 (H) mm (3) Weight: 26.23 Kg (10 modules per box)

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows: (1) UL60950-1 or updated standard. (2) IEC60950-1 or updated standard.

10.4 OTHER

When fixed patterns are displayed for a long time, remnant image is

likely to occur.

3 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M216H1-L01 model is a 21.6 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a

30-pin 2ch-LVDS interface. This module supports 1920 x 1080 Full HD (16:9 wide screen) mode and

displays up to 16.7 millions colors. The inverter module for the Backlight Unit is not built in.

1.2 FEATURES

- Super wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation (EBU Like Specifications)

- FULL HD(1920 x 1080 pixels) resolution

- DE (Data Enable) only mode

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

- LVDS (Low Voltage Differential Signaling) interface

- RoHS compliance.

1.3 APPLICATION

- Workstation & desktop monitor

- Display terminals for AV application

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Diagonal size 547.863 mm Active Area 477.504 x 268.596 mm Bezel Opening Area 481.5 (H) x 272.6 (V) mm Driver Element a-Si TFT active matrix - Pixel Number 1920 x R.G.B. x 1080 pixel Pixel Pitch 0.248(H) x 0.248(V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7 millions color Transmissive Mode Normally White - Surface Treatment Hard coating (3H), AG (Haze 25%) - Module Power Consumption 29.51 Watt (2)

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 499 499.5 500 mm

Module Size

I/F connector mounting

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Please refer to sec. 3.1 & 3.2 in this document for more information of power consumption

Vertical(V) 292.1 292.6 293.1 mm Depth(D) 16.5 17 17.5 mm

Weight -- 2350 2400 g

The mounting inclination of the connector makes

position

the screen center within ±0.5 mm as the horizontal.

4 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

(1)

www.panelook.com

Global LCD Panel Exchange Center



A

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

LCD Cell Life Time L

Relative Humidity (%RH)

100

90

80

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Value

Min. Max.

- 50 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

50,000 - Hrs

CELL

Unit Note

MTBF based

60

Operating Range

40

20

10

Storage Range

-20 40 0 20 -40

Temperature (

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90% RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.

Note (3) 50G,11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.

C)

60

80

Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis

Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid

enough to prevent the module from twisting or bending by the fixture.

t Room Temperature

Side Mount Fixing Screw

Gap=3~5mm

Bracket

LCD Module

Side Mount Fixing Screw

Stage

5 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6 V (1)

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2500 V Lamp Current IL 3.0 8.0 mA Lamp Frequency FL 40 80 KHz (1), (2)

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function

operation should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for lamp (Refer to 3.2 for further information).

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Unit Note

(1), (2), IL = 7.0 mA

RMS

(1), (2)

Approval

6 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

3. ELECTRICAL CHARACTERISTICS

3.1.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 100 mV Rush Current I

- -- 3 A (2)

RUSH

White - 630 820 mA (3)a

Power Supply Current

Black - 1010 1450 mA (3)b Vertical Stripe

lcc

- 1030 1500 mA (3)c Power consumption (without Backlight Unit) Plcd 5.15 7.5 Watt (4) LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic -- 1.2 -- V

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

Note (4) The power consumption is specified at the pattern with the maximum current.

Value

Unit Note

Approval

(High to Low)

(Control Signal)

SW

+12V

+5.0V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

Vcc

(LCD Module Input)

Vcc rising time is 470μs

Vcc

0.9Vcc

0.1Vcc

GND

470μs

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f

Hz, whereas a power dissipation check pattern below is displayed.

7 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

= 60

v

www.panelook.com

Global LCD Panel Exchange Center

≤≤≤

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B

R

G

B

R

Active Area

3.1.2 Vcc Power Dip Condition:

Dip condition:

Vcc

4.5V

4.0V

Td

msTdVVccV 20,5.40.4

8 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3.2 BACKLIGHT UNIT

Parameter Symbol

Lamp Input Voltage VL 783 870 957 V Lamp Current IL 3 7.0 8 mA

Lamp Turn On Voltage V

Operating Frequency FL 40 55 80 KHz (3) Lamp Life Time LBL 40000 50000 - Hrs (5) IL = 7.0 mA Power Consumption PL - 24.36 - W (4), IL = 7.0 mA

Note (1) Lamp current is measured by utilizing high-frequency current meters as shown below:

S

www.panelook.com

Value

Min. Typ. Max.

- - 1370(25°C) V

- - 1770(0°C) V

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Unit Note

I

RMS

(2)

RMS

(2)

RMS

= 7.0 mA

L

(1)

LCD

Module

HV+ (Pink) LV (White) HV- (Blue)

LV (Black)

HV+ (Pink) LV (White)

HV- (Blue) LV (Black)

Current

1 2

A

Inverter

Current Amplify

1

2

A

Oscilloscope

Probe

Measure equipment: Current Amplify: TektronixTCPA300 Current probe: Tektronix TCP312 Oscilloscope: TDS3054B

Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second

after startup. Otherwise, the lamp may not be turned on normally. It is the value output voltage of

NF circuit.

Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the

display, which might cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronization frequency and its harmonics

as far as possible.

Note (4) P

L

= I

LVL

X 4CCFLs

Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the

condition Ta = 25 2

o

C and IL = 7 mA until one of the following events occurs:

(a) When the brightness becomes 50% of its original value.Љ (b) When the effective ignition length becomes 80% of its original value.Љ

(The effective ignition length is a scope that luminance is over 80% of that at the

center point.)

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter

9 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrument.

The output of the inverter must have symmetrical (negative and positive) voltage waveform and

symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter

which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may

produce interface with horizontal synchronous frequency and as a result this may cause beat on the

display. Therefore lamp frequency shall be as away possible from the horizontal synchronous

frequency and from its harmonics in order to prevent interference.

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Requirements for a system inverter design, which is intended to have a better display performance, a

better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its

leakage current.

a. The asymmetry rate of the inverter waveform should be 10% below;

b. The distortion rate of the waveform should be within Ѕ2 ± 10%;

c. The ideal sine wave form shall be symmetric in positive and negative polarities.

* Asymmetry rate:

I p

I -p

| I

* Distortion rate

I

– I –p | / I

p

(or I –p) / I

p

rms

* 100%

10 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

RXO0(+/-)

RXO1(+/-)

RXO2(+/-)

RXO3(+/-)

RXOC(+/-)

RXE0(+/-)

RXE1(+/-)

RXE2(+/-)

RXE3(+/-)

RXEC(+/-)

AGMODE

Vcc

GND

VL

INPUT CONNECTOR

(093G30-B0001A)

LAMP CONNECTOR

4.2 BACKLIGHT UNIT

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1920x3x1080)

DATA DRIVER IC

BACKLIGHT UNIT

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

Note: On the same side, the same-polarity lamp voltage design for lamps is recommended

11 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd) 10 RXO3- Negative LVDS differential data input. Channel O3(odd) 11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC Not connection, this pin should be open. 26 NC Not connection, this pin should be open. 27 AGMODE AGMODE should be tied to ground or open. 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply

Note (1) Connector Part No.: 093G30-B0001A(STARCONN) or EQUIVALENT.

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Note (2) The first pixel is odd.

Note (3) Input signal of even and odd clock should be the same timing.

12 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.2 LVDS DATA MAPPING TABLE

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

LVDS Channel O0

LVDS Channel O1

LVDS Channel O2

LVDS Channel O3

LVDS Channel E0

LVDS Channel E1

LVDS Channel E2

LVDS Channel E3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6

5.3 BACKLIGHT UNIT

Pin Symbol Description Remark

1 HV High Voltage Pink 2 LV Low Voltage White 1 HV High Voltage Blue 2 LV Low Voltage Black

Note (1) Connector Part No.: YEONHO 35001HS-02L or equivalent

Note (2) User’s connector Part No.: YEONHO 35001WR-02L or equivalent

13 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.4 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Basic Colors

Gray Scale Of Red

Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

0

1

0

1

0

:

1

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

Approval

0

1

0

1

0

:

0

1

0

1

0

:

0

Green(0) / Dark Green(1)

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

14 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 58.54 74.25 98 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

NoteΚ(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

Period Tc - 13.47 - ns High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 50 60 75 Hz Tv=Tvd+Tvb Total Tv 1115 1125 113 6 Th - Display Tvd 1080 1080 1080 Th Blank Tvb 35 45 56 Th Total Th 1050 1100 1150 Tc Th=Thd+Thb Display Thd 960 960 960 Tc Blank Thb 90 140 190 Tc -

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

15 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

≤

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the

conditions shown in the following diagram.

CC

Power Supply

0.9 V

CC

V

0.5 ms ≤ T1≤10 ms

2

50 ms

T

0

500ms

T

3

50 ms

CC

0V

T

4

Signals

0V

Backlight (Recommended)

450ms≤T5

90ms≤T6

0.1V

CC

T1

2

T

Power On

50%

5

T

Power ON/OFF Sequence

VALID

50%

T

6

3

T

Power Off

0.1V

DD

T4

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off, the display may, instantly, function abnormally.

(3) In case of

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the module has been fully discharged between power on/off periods.

(5) Interface signal shall not be kept at high impedance when the power is on.

(6) CMO won’t take any responsibility for the products which are damaged by the customers not following the

Power Sequence.

(7) There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To avoid this

symptom, we suggest "Vcc falling timing" to follow "t7 spec"

16 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 7.0±0.5 mA Inverter Driving Frequency FL 55±5 KHz Inverter Darfon VK.13165.101

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Green

Color Chromaticity

Blue

White

Rx

Ry

Gx Gy Bx

By

Wx

Wy

www.panelook.com

θ

=0° , θY =0°

x

CS-1000T

R=G=B=255

Grayscale

25±2

50±10

Typ –

0.03

0.651

0.334

0.286

0.600

0.152

0.075

0.313

0.329

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

o

C

%RH

Typ +

0.03

(1), (5)

Center Luminance of White L

C

250 300 --- cd/m2(4), (5)

Contrast Ratio CR 700 1000 --- - (2), (6)

Response Time

TR --- 1.3 2.2 ms T

White Variation δW

Horizontal

Viewing Angle

Vertical

Horizontal

Viewing Angle

Vertical

θx+

θ

θY+

θ

θx+

θ

θY+

θ

F

-

x

-

Y

-

x

-

Y

θ

=0° , θY =0°

x

θ

=0° , θY =0°

x

USB2000

CR>10

USB2000

CRЊ5

USB2000

--- 3.7 5.8 ms

--- ---- 1.33 - (5), (6)

75 75 70

70

80 80 80 80

85 --85 80 80

---

--89 89 89 89

-

Deg. (1), (5)

Note (1) Definition of Viewing Angle (θx, θy)

(3)

17 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (2) Definition of Contrast Ratio (CR):

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

Gray Level 255

100%

90%

Optical

Response

10%

0%

, TF):

R

Gray Level 0

Gray Level 255

Time

T

R

66.67ms

T

F

66.67ms

18 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 255 at center point

L

= L (5)

C

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 40 minutes in a windless room.

LCD Module

LCD Panel

USB2000

Center of the Screen

Gray 0

CS-1000T

Field of View = 2º

Light Shield Room

(Ambient Luminance < 2 lux)

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 9 points

δW = Maximum [L (1) ~ L (9)] / Minimum [L (1) ~ L (9)]

Horizontal Line

D

D/10 D/2

1 3

4

2

5

W

W/10

W/2

Vertical Line

W/10

7

8

D/10

6

9

X

: Test Point

X=1 to 9

Active Area

19 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 10 LCD modules / 1 Box

(2) Box dimensions: 563(L) X 390 (W) X 375 (H) mm

(3) Weight: 26.23 Kg (10 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Corner, 3 Edge, 6 Face, for ISTA Standard Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Non Operation

Carton dimensions:563(L)x390(W)x375(H)mm

Weight : Approx. 26.23 Kg(10 modules per carton)

PE Foam(Bottom)

Carton

LCD Module

PE Bag

Drier

Carton Label

Figure. 8-1 Packing method

20 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

For Ocean shipping

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

Sea / Land Transportation

(40ft HQ Container)

(L1000mm,t=3mm)

Film

(L1130mm,t=5mm)

Carton Label

PE Sheet

(L1150*W1190*H143mm)

PP Belt

Sea / Land Transportation

(40ft Container)

PE Sheet

(L1000mm,t= 3mm)

Film

(L625mm,t=5mm)

(L1130mm,t=5mm)

PP Belt

Carton Label

(L1150*W1190*H143mm)

Figure. 8-2 Packing method

For Air transport

Air Transportation

(L1000mm,t=3mm)

(L1130mm,t=5mm)

Film

Carton Label

PE Sheet

PP Belt

(L1150*W1190*H143mm)

Figure. 8-3 Packing method

21 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

(a) Model Name: M216H1-L01

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) CMO barcode definition:

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

(Fab ID)

CM21H11XXXXXLXXLYMDNNNN

Serial ID: XX

Code Meaning Description

XX CMO internal use XX Revision Cover all the change

X CMO internal use -

XX CMO internal use -

YMD Year, month, day

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

21H11 Model number M216H1-L01=21H11

Revision code ZBD, C1=A, C2=B, ….

X

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 1~Z

XX Module location Tainan, Taiwan=TN ; NB, China=NP ; NH, China=NH

L Module line # 1~Z

YMD Year, month, day

NNNN Serial number Manufacturing sequence of product

(e) UL Factory ID:

-XX-X-XX-YMD-L-NNNN

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

-21H11-X-X-X-XX-L-XX-L-YMD-NNNN

Non ZBD, C1=1, C2=2, …. Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V

Region Factory ID

TWCMO GEMN

NBCMO LEOO

NBCME CANO

NHCMO CAPG

22 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Feb. 11, 2009

Model No.: M216H1-L01

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight

will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.

(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

(1) UL60950-1 or updated standard.

(2) IEC60950-1 or updated standard.

10.4 OTHER

When fixed patterns are displayed for a long time, remnant image is likely to occur.

23 / 25

Version 3.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

CMO M216H1-L01 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual