CMO M190E6-L01 Specification
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 11
------------------------------------------------------- 12
------------------------------------------------------- 15
------------------------------------------------------- 17
------------------------------------------------------- 23
------------------------------------------------------- 25
------------------------------------------------------- 26
------------------------------------------------------- 27
2 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
REVISION HISTORY
Version Date Section Description
Ver. 1.0
May, 9, 06’
All
1.M190E6 -L01 Preliminary specifications was first issued.
3 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M190E6-L01 is a 19.0” TFT Liquid Crystal Display module with LED Backlight unit and 30 pins 2ch-LVDS
interface. This module supports 1280 x 1024 SXGA mode and can display 16.2M colors. The converter
module for Backlight is not built in. LED Backlight unit is designed by Red, Green, and Blue color LED
devise packed into single chip, and a Photo Sensor is built in the Backlight unit to feedback chromaticity for
dynamically adjusting white balance.
1.2 FEATURES
- LED Backlight
- High color saturation
- Wide viewing angle.
- High contrast ratio
- Super fast response time
- DE (Data Enable) only mode
- RoHS Compliance
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 376.32 (H) x 301.056 (V) (19.0” diagonal) mm
Bezel Opening Area 380.2(H) x 305(V) mm
Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 1024 pixel Pixel Pitch 0.294 (H) x 0.294 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.2M color Transmissive Mode Normally White - Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - -
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 395.5 396.0 396.5 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 16.0 16.5 17.0 mm
Weight - TBD g -
4 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(1)
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
A
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.
- 50 G (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Min. Max.
Value
Unit Note
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
Note (3) 11ms, half sine wave, 1 time for ± X, ± Y, ± Z.
80 60 -20 400 20-40
Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
t Room Temperature
Side Mount Fixing Screw
Gap=2mm
Bracket
LCD Module
Side Mount Fixing Screw
Stage
5 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V
Logic Input Voltage VIN -0.3 4.3 V
Min. Max.
2.2.2 BACKLIGHT UNIT
Item
LED DC Forward Current 120 120 80 mA
LED Peak Pulse Current 480 400 400 mA
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Red Green Blue
Value
Max. Value
Unit Note
(1), (2)
Unit Note
(1), (2)
Note (2) Testing Environment Temperature = 25ºC , Duty Ratio=1/10, Pulse Width=0.1ms.
6 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: May. 9, 2006
Model No.: M190E6-L01
Preliminary
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I
White
Power Supply Current
Black
Vertical Stripe
RUSH
-
-
-
- 2 3 A (2)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic - 1.2 - V
Logic “L” input voltage Vil Vss - 0.8 V
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
Value
0.5
1.3
0.9
Unit Note
0.8 A (3)a
1.5 A (3)b
1.3 A (3)c
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470Ps
+5.0V
0.9Vcc
0.1Vcc
GND
470Ps
7 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
Active Area
8 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: May. 9, 2006
www.panelook.com
Model No.: M190E6-L01
Preliminary
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
3.2.1 LED DRIVER SPEC
Parameter SYMBOL MIN TYP MAX UNIT REMARK
Red LED Driver RD1, RD2 28.8 35.2 44.8 V
Green LED Driver GD1, GD2 44 54.4 58 V
Blue LED Driver BD1, BD2 44 54.4 56 V
Red return RR1, RR2 - 76 480 mA
Green return GR1, GR2 - 118 400 mA
Blue return BR1, BR2 - 45 400 mA
`
3.2.2 PHOTO SENSOR SPEC
Parameter SYMBOL MIN TYP MAX UNIT REMARK
RGB Sensor power supply VCC - 3.3 5 V
R Sensor voltage output Rout - - 3.3 V
G Sensor voltage output Gout - - 3.3 V
B Sensor voltage output Bout - - 3.3 V
9 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Loading...