CMO M190A1-L06 Specification

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

TFT LCD Approval Specification

MODEL NO.: M190A1-L06

Customer: Fujitsu Approved by: Note:

記錄工作審核角色投票

2009-02-20

15:02:55 CST

PMMD II

Director

kevin_wu(吳柏勳

Director Accept

/56520/54894)

1 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

- CONTENTS -

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATI NGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

10.3 SAFETY STANDARDS

10.4 OTHER

11. MECHANICAL CHARACTERISTICS

2 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

REVISION HISTORY

Version Date Section Description

3.0

3.1

3.2

Aug, 13, 07’

Oct, 08, 07’

Feb. 09, ‘09

All

9.1

2.22

3.2

8.

10.3

10.4

M190A1-L06 Specifications was first issued. CMO MODULE LABEL From

M190A1-L06 Rev. XX

01A

M190A1-L06 Rev. XX

XXXXXXXYMDLNNNN

(LEOO)

(LEOO) (RoHS)

(RoHS)

CM19A16XXXXXLXXLYM DNNNN

change to

CM19A16XXXXXLXXLYM DNNNN

CP361822-01

M190A1-L06 Rev. XX

0XA

M190A1-L06 Rev. XX

XXXXXXXYMDLNNNN

CP361822-01

(LEOO)

(LEOO) (RoHS)

(RoHS)

Note: Add mark ”LEOO”, ”RoHS” If prod uction by NBCMO,

Add lamp frequency minimum value “40”. Modify the graphic of note(1)

Modify the description of note (2), adding “It is the value output voltage of NF circuit.”

Change package from 5pcs/box to 7pcs/box. Add “Safety Standards”

Add “Other

3 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M190A1-L06 is a 19” wide TFT Liquid Crystal Display module with 4 CCFL Backlight unit and 30 pins

2ch-LVDS interface. This module supports 1440 x 900 WXGA+ mode and can display 16.7M colors. The inverter module for Backlight is not built in.

1.2 FEATURES

- Super Wide viewing angle.

- Super High contrast ratio

- Super fast response time

- High color saturation

- WXGA+ (1440 x 900 pixels) resolution

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- RoHS Compliance

1.3 APPLICA TION

- TFT LCD Monitor

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Diagonal Size 483.96 (19.05” diagonal) mm Active Area 410.4 (H) x 256.5 (V) mm Bezel Opening Area 414.36 x 260.45 mm Driver Element a-si TFT active matrix - Pixel Number 1440 x R.G.B. x 900 pixel Pixel Pitch 0.285 (H) x 0.285 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Transmissive Mode Normally White - Color saturation 72%NTSC (typ.) - Surface Treat ment Hard coating (3H), Anti-glare (Haze 25) - Module Power Consumption 25.2 Watt (2)

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 426.7 427.2 427.7 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. Note (2) Please refer to sec.3.1 & 3.2 for more information of power consumption.

Vertical(V) 276.9 277.4 277.9 mm Depth(D) - 16.0 16.5 mm

Weight - 1780 1800 g -

4 / 25

(1)

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

A

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Min. Max. Storage Temperature TST -20 +60 ºC (1) Operating Ambient T emperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

- 50 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Note (1) Temperature and relative humidity range is shown in the figure below.

Relative Humidity (%RH)

100

90

Value

Unit Note

80

60

40

20

10

Temperature (ºC)

Operating Range

Stor age Range

8060-20 40020-40

(a) 90 %RH Max. (Ta ≦ 40 ºC). (b) Wet-bulb temperature should be 39 º C Max. (Ta > 40 ºC). (c) No condensation.

Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max. Note (3) 50G,11ms, half sine wave, 1 time for ± X, ± Y, ± Z. Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

t Room Temperature

Side Mount Fixing Screw

LCD Module

Side Mount Fixing Screw

Stage

Gap=2mm

Bracket

5 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6.0 V Logic Input Voltage VIN -0.3 4.3 V

Min. Max.

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2.0K V Lamp Current IL - 7.5 mA Lamp Frequency FL 40 80 KHz

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Min. Max.

Value

Unit Note

(1)

Unit Note

(1), (2), IL = 7.0mA

RMS

(1), (2)

Note (2) Specified values are for lamp (Refer to 3.2 for further information).

6 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I

White - 0.5 0.7 A (3)a

Power Supply Current

Black - 0.7 1.0 A (3)b Vertical Stripe

RUSH

lcc

- 1.6 3 A (2)

- 0.7 1.0 A (3)c

Power Consumption PLCD 3.5 5.5 Watt (4) LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic - 1.2 - V Logic “L” input voltage Vil Vss - 0.8 V

Note (1) The module should be always operated within above ranges.

Value

Unit Note

Note (2) Measurement Conditions:

+5.0V

R1

47K

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R2

1K

47K

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3 1uF

Vcc

(LCD Module Input)

Vcc rising time is 470µs

+5.0V

0.9Vcc

0.1Vcc

GND

470µs

7 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern belo w is displayed.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B B

R R

R

G G

B B

R

Note (4)The power consumption is specified at the pattern with the maximum current.

Active Area

8 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

3.2 BACKLIGHT UNIT

Parameter Symbol

Min. Typ. Max. Lamp Input Voltage VL --- 775 853 V Lamp Current IL 2.0 7.0 7.5 mA

Lamp Turn On Voltage VS

--- ---

Value

1300(25℃)

1400(0℃)

Ta = 25 ± 2 ºC

Unit Note

I

RMS

V

(2)

RMS

(2)

V

RMS

= 7.0 mA

L

(1)

Operating Frequency FL 40 --- 80 KHz (3) Lamp Life Time LBL 40000 --- --- Hrs (5) Power Consumption PL --- 21.7 --- W (4), IL = 7.0 mA

Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:

LCD Module

HV (Pink)

HV (Pink) LV (White)

LV (White)

HV (Blue)

LV (Black)

Current Probe

1

2

1

1 2

2

A

Inverter

A

Current Amplify

Oscilloscope

Measure equipment: Current Amplify: T ektronix TCP A300

Current probe: Tektronix TCP312 Oscilloscope: TDS3054B

Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second

after startup. Otherwise the lamp may not be turned on. It is the value output voltage of NF circuit.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the

display, and this may cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible.

Note (4) P

= IL ×VL × 4 CCFLs

L

Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition

Ta = 25 ±2

o

C and IL = 7.0 mA rms until one of the following events occurs:

(a) When the brightness becomes or lower than 50% of its original value. (b) When the effective ignition length becomes or lower than 80% of its original value. (Effective

ignition length is defined as an area that has less than 80% brightness compared to the brightness in the center point.)

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. When designing or ordering the

9 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument.

The output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference.

Requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and redu ce its leakage current. a. The asymmetry rate of the inverter waveform should be 10% below; b. The distortion rate of the waveform should be within √2 ± 10%;

c. The ideal sine wave form shall be symmetric in positive and negative polarities.

* Asymmetry rate:

I p

I -p

| I

* Distortion rate I

– I –p | / I

p

(or I –p) / I

p

rms

* 100%

10 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

RXO0(+/-) RXO1(+/-) RXO2(+/-) RXO3(+/-) RXOC(+/-) RXE0(+/-) RXE1(+/-) RXE2(+/-) RXE3(+/-) RXEC(+/-)

NC Vcc

GND

VL

(JAE- FI-X30SSL-HF or

INPUT CONNECTOR

-

LAMP CONNECTOR

(JST-BHSR-02VS-1)

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1440x3x900)

DA TA DRIVER IC

BACKLIGHT UNIT

4.2 BACKLIGHT UNIT

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

1 HV(Pink)

2 LV(White)

1 HV(Blue)

2 LV(Black)

Note: On the same side, the same-polarity lamp voltage design for lamps is recommended.

11 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd) 10 RXO3- Negative LVDS differential data input. Channel O3(odd) 11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC Not connection, this pin should be open. 26 NC Not connection, this pin should be open. 27 NC Not connection, this pin should be open. 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply

Note (1) Connector Part No.: 093G30-B0001A (STARCONN ) or FI-X30SSL-HF (JAE) or equivalent. Note (2) The first pixel is odd. Note (3) Input signal of even and odd clock should be the same timing.

12 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

L VDS Channel E0

L VDS Channel E1

L VDS Channel E2

L VDS Channel E3

L VDS Channel O0

L VDS Channel O1

L VDS Channel O2

L VDS Channel O3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8

Data

order LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6

EB1 EB0 EG5 EG4 EG3 EG2 EG1

13 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

5.2 BACKLIGHT UNIT

Pin Symbol Description Remark

1 HV High Voltage Pink 2 LV Low Voltage White

1 HV High Voltage Blue 2 LV Low Voltage Black

Note (1) Connector Part No.: BHSR-02VS-1 (JST) or equivalent Note (2) User’s connector Part No.:SM02B-BHSS-1-TB (JST) or equivalent

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

: Red(253) Red(254) Red(255)

Green(0) / Dark Green(1) Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

1

0

1

0

:

1

0

:

0

:

0

Red Green Blue

0

1

0

1

0

1

:

1

0

1

0

:

0

:

0

Data Signal

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

14 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc - 44.5 65 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

Period Tc 17.9 22.5 - ns High Time Tch - 4/7 - T c Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 50 60 77 Hz Tv=Tvd+Tvb Total Tv 905 926 1050 Th Display Tvd 900 900 900 Th Blank Tvb Tv-Tvd 26 Tv-Tvd Th Total Th 750 800 960 Tc Th=Thd+Thb Display Thd 720 720 720 Tc Blank Thb Th-Thd 80 Th-Thd Tc -

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set

to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

DE

Th

DCLK

T

DE

DATA

C

Thb

T

hd

15 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

≤<≤

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.

Restart

Power On

Power Off

Power Supply

for LCD, Vcc

-

Interface Signal (LVDS Signal of Transmitter), V

-

Power for Lamp

0V

I

Timing Specifications:

0.5< t1 ≦ 10 msec 0 < t2 ≦ 50 msec 0 < t3 ≦ 50 msec

t4 ≧ 500 msec t5 ≧ 450 msec

10%

90%

t1

t2

90%

Valid Data

t6 t5

50%50%

ONOFF OFF

t3

t7

10%

t4

t6 ≧ 90 msec

5 ≦t7 ≦ 100 msec

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off before the backlight turns off, the display may momentarily become abnormal screen.

(3) In case of VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the mo dule has been fully discharged between power of and on period. (5) Interface signal shall not be kept at high impedance when the power is on. (6) Vcc Power Dip Condition:

Vcc

0.8Vcc

0.9Vcc

Dip condition:

msTdVccVccVcc 20,9.08.0

Td

16 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current IL 7.0 mA Inverter Operating Frequency FL 55 KHz Inverter Darfon VK.13165.101

25±2

50±10

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

o

C

%RH

be measured under the test conditions described in 7.1 and stable environment shown in Note (5).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Green

Color Chromaticity

Blue

White

Center Luminance of White L Contrast Ratio CR

Response Time White Variation δW θx=0°, θY =0° ---

Horizontal

Viewing Angle

Vertical

Rx Ry Gx Gy

Bx

By Wx Wy

C

TR --- 1.5 6.5 ms

T

F

θx+ 75 85 ---

-

θ

x

θY+ θ

-

Y

=0°, θY =0°

θ

x

CS-1000T

θ

=0°, θY =0°

x

CR ≧ 10

Typ –

0.03

230 300 --- cd/m2(4), (5) 500 850 --- - (2), (5)

--- 3.5 8.5 ms

75 70 70

0.647

0.334

0.284

0.607

0.151

0.071

0.313

0.329

1.3 1.5

85 --80 --80 ---

Typ +

0.03

(1), (5)

- (5), (6)

Deg. (1), (5)

(3)

17 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

Note (1) Definition of Viewing Angle (θx, θy):

θX- = 90º

x-

6 o’clock

θ

y- = 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Normal

θx = θy = 0º

θy- θy+

θx−

θx+

y+

12 o’clock direction

θ

y+ = 90º

x+

θX+ = 90º

Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (1) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 255

R

T

R

, TF):

Gray Level 255

Gray Level 0

Time

TF

66.67ms

18 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

A

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 255 at center point LC = L (1) L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 40 minutes in a windless room.

LCD Module

LCD Panel

USB2000

Center of the Screen

CS-1000T

Field of View = 2º

Light Shield Room (Ambient Luminance < 2 lux)

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 13 points δW = Maximum [L (1), L (2) ……L (4), L (13)] / Minimum [L (1), L (2) …… L (4), L (13)]

10mm

6

H/4

H

Vertical Line Number

H/4 H/4 H/4

9 10

11 12

10mm 10mm

10mm

Horizontal Line Number

W/4 W/4 W/4 W/4

7

23

1

8

X

：Test Point X＝1 to 13

45

13

W

ctive area

19 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

8. PACKAGING

8.1 PACKIN G SPECIFICATIONS

(1) 7 LCD modules / 1 Box (2) Box dimensions: 525(L) X 300 (W) X 360 (H) mm (3) Weight: approximately 14.78 Kg (7 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Corner, 3 Edge, 6 Face, 61cm Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

Non Operation

Figure. 8-1 Packing method

20 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

For ocean shipping

Sea / Land Transportation (40ft HQ Container)

Sea / Land Transportation (40ft Container)

Corner Protector (50*50*1000mm)

PE Sheet

Film

PE Sheet

Film

For air transport

PP Belt

Carton label

Corner Protector (50*50*1000mm)

Pallet (1150*1150*143mm)

Corner Protector (50*50*1000mm)

PE Sheet

Film

PE Sheet

Film

PP Belt

Carton label

Corner Prot ector (50*50*625mm)

Corner Protector (50*50*1000mm)

Pallet (1150*1150*143mm)

Figure. 8-2 Packing method

Air Transportation

Corner Protector (50*50*1000mm)

PE Sheet

Film

PP Belt

Carton label

Corner Protector (50*50*1000mm)

Pallet (1150*1150*143mm)

Figure. 8-3 Packing method

21 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Doc. No.: 400004308

Issued Date: Feb, 09, 2009

Model No.: M190A1-L06

Approval

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and it s definitions are as following explanation.

(Fab ID)

M190A1-L06 Rev. XX

0XA

(a) Model Name: M190A1-L06

M190A1-L06 Rev. XX

XXXXXXXYMDLNNNN

CP361822-01

RoHS

(LEOO)

(RoH S)

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) CMO barcode definition:

Serial ID: XX

-XX-X-XX-YMD-L-NNNN

Code Meaning Description

XX CMO internal use XX Revision Cover all the change

X CMO internal use -

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

YMD

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM

-19A16-X-X-X-XX-L-XX-L-YMD-NNNN

Code Meaning Description

CM Supplier code CMO=CM

19A16 Model number M190A1-L06=19A16

X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z X Source driver IC code

X Gate driver IC code

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, T oshiba =L, Windbond=M

XX Cell location Tainan, Taiwan=TN

L Cell line # 1,2,~,9,A,B,~,Y,Z

XX Module location Tainan, Taiwan=TN ; Ning bo China=NP

L Module line # 1,2,~,9,A,B,~,Y,Z

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

YMD

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

NNNN Serial number Manufacturing sequence of product

22 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Issued Date: Feb, 09, 2009

Doc. No.: 400004308

Model No.: M190A1-L06

Approval

(e) FAB ID(UL Factory ID):

Region Factory ID

TWCMO GEMN

NBCMO LEOO

NBCME CANO

NHCMO CAPG

10. PRECAUTIONS

10.1 ASSEMBL Y AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bendi ng or twisting to the module during assembly. (2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or o ut while the mod ule is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions. (10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disa ssemble the module or insert anything into the Backlight unit. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washe d away thoroughly with soap. (3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows: (1) UL60950-1 or updated standa rd. (2) IEC60950-1 or updated standard.

10.4 OTHER

When fixed patterns are displayed for a long time, remnant image is likely to occur.

23 / 25

Version 3.2

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

CMO M190A1-L06 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual