CMO M190A1-C03 Specification

Global LCD Panel Exchange Center

A

TFT LCD Approval Specification

MODEL NO.:M190A1-C03

FUNAI MODEL No.:TLCD100CME19

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Customer :

pproved by :

Note :

/16

1

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

- CONTENTS -

.

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION ------------------------------------------------------- 4

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS ---------------------------------------------- 4

3. SUGGESTIVE DRIVING CONDITION ---------------------------------------------- 5

4. PANEL PIN DEFINITION ------------------------------------------------------- 6

5. OPTICAL CHARACTERISTICS ---------------------------------------------- 8

5.1 TEST CONDITIONS

5.2 OPTICAL SPECIFICATIONS

6. PACKAGING --------------------------------------------- 12

6.1 PACKING SPECIFICATIONS

6.2 PACKING METHOD

7. DEFINITION OF LABELS ---------------------------------------------- 14

8. PRECAUTIONS ---------------------------------------------- 15

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

8.2 SAFETY PRECAUTIONS

9. PANEL DRAWING ---------------------------------------------- 16

/16

2

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

Version Date Section Description

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Ver 2.0

Aug,28 ’07

-

M190A1-C03 Specifications was first issuedΖThe spec is same as M190A1-C01 .

M190A1-C03 is for Funai Normal grade .

/16

3

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

1.GENERAL DESCRIPTION

1.1 OVERVIEW

The M190A1-C03 is a 19-inch wide LCD cell with thin film transistors as active elements and contains

1440x900 pixels. Each pixel is divided into red, green and blue dot, which are arranged in vertical stripe.

The cell is normally white mode, and can be applied to the transmission type display. Backlight unit (BLU)

and circuit board for the cell are not built in.

1.2 FEATURES

- Wide viewing angle

- High contrast ratio

- Fast response time

- WXGA+ (1440 x 900 pixels) resolution

1.3 APPLICATION

- LCD Monitor

- LCD TV

1.4 GENERAL SPECIFICATIONS

Item Specification Unit
Max Panel Dimension (TFT) 419.84 X 266.05 mm
Glass thickness( TFT/ CF ) 0.7/0.7 mm
Active Area 410.4 (H) x 256.5 (V) (19.05” diagonal) mm
Driver Element a-si TFT active matrix ­Pixel Number 1440X R.G.B X 900 pixel
Pixel Pitch 0.285 (H) X 0.285 (V) mm
Pixel Arrangement RGB vertical stripe ­Transmissive Mode Normally white ­Surface Treatment Hard coating (3H), AG (Haze 25%) ­Polarizer Type E -Wide View -

Polarizer Dimension

Polarizer Thickness

Weight 446(typ.) g

TFT 414.0 X 259.7 mm

CF 415.84 X 262.15 mm

TFT 0.21 mm

CF 0.21 mm

2. ABSOLUTE MAXIMUM RATINGS

1. Storage condition : With shipping package.

2. Storage temperature range : 25±5 к

3. Storage humidity range : 50±10% RH.

4. Shelf life : 30 days

Version 2.0

.

/16

4

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3. Suggestive Driving Condition

Item Min. Typ. Max. Unit

V

Driving
Voltage

B: Black pattern

W: White pattern

V

V
GЦ-D offset

Charging time - 12.43 - us

On 23.7 24.5 25.3 V

G

Off -6.6 -6.8 -7.0 V

Gam1 - 11.722 - V

B

D

COM

Gam14 - 0.187 - V
Gam7 - 6.397 - V

W

Gam8 - 5.993 - V

Center - 5.16 - V

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

2 - - us

Gamma Voltage : Gam1 > Gam2 > Gam3 > … > Gam10 GЦ

: gate pulse falling edge

DRIVING TIMING DIAGRAM

VG

VD

VCOM

/16

5

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

4. PANEL PIN DEFINITION

4.1 DATA PIN DEFINE

pin number TAB1 TAB2~9 TAB10

1
2

3
4
5
6
7
8

9

10

11

12
13
14

15

16

17

18

19
20

21

22
23

24

25

26~457

458

459

460
461
462
463
464

465
466
467
468
469

Note: Test pin is recommand for floating

Test Test Test
Test Test Test

Test dummy dummy

XAO dummy dummy

OE dummy dummy

CPV dummy dummy

STV2 dummy dummy

VSS dummy dummy

˩˦˦ʳ
˩˗˗ʳ
˩˗˗ʳ

˩˸˸ʳ

dummy dummy
dummy dummy
dummy dummy

dummy dummy
Vgl dummy dummy
Vgl dummy dummy

˩˺˿ʳ
˩˺˿ʳ

dummy dummy

dummy dummy

˷ʳ ˷ʳ ˷ʳ

˩˺˻ʳ
˩˺˻ʳ

dummy dummy

dummy dummy

Vgh dummy dummy

˩˺˻ʳ

dummy dummy

˷ʳ ˷ʳ ˷ʳ

Vst dummy dummy

˩˶ʳ ˩˶ʳ ˩˶ʳ

Test Test Test

ˢ˨˧˄ˇˆ˅ʳ ˢ˨˧˄ˇˆ˅ʳ ˢ˨˧˄ˇˆ˅ʳ

Test Test Test

dummy dummy Test

˩˶ʳ ˩˶ʳ ˩˶ʳ

dummy dummy Vst
dummy dummy Vgl
dummy dummy Vcom
dummy dummy Vcom

dummy dummy Test

Vcom Vcom Vcom
Vcom Vcom Vcom

Test Test Test
Test Test Test

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

/16

6

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.2 SCAN PIN DEFINE

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Scan 1~3

ʳʳʳʳʳʳʳʳʳʳʳ

OE

CPV

VGL

STV2

VSS

VDD

VEE

Vgl

Vgl

DUMMY

ʳʳʳʳʳʳʳʳʳʳVGL

XAO ʳʳVGL

MODE ʳʳVGH

Vdd ʳʳVGH
TEST ʳʳVGH
TEST ʳʳVGH

ʳʳDummy PAD

DUMMY ʳʳOUT300

. ʳʳ.
. ʳʳ.

ʳʳ.
ʳʳ.

. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.

ʳʳ.
ʳʳ.
ʳʳ.

. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.
. ʳʳ.

DUMMY ʳʳOUT1

ʳʳDummy PAD
TEST ʳʳVGH
TEST ʳʳVGH

VSS ʳʳVGH

TEST ʳʳVGH

XAO ʳʳVGL

ʳʳʳʳʳʳʳʳʳʳVGL

OE

CPV

VGL

STV1

VSS

VDD

VEE

Vgl

Vgl

DUMMY

/16

7

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. OPTICAL CHARACTERISTICS

5.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta
Ambient Humidity Ha
Gamma voltage - Refer to Item 3 driving condition V

Vcom - most suitable Vcom V

5.2 OPTICAL SPECIFICATION

ITEM Symbol Condition MIN. TYP. MAX. UNIT NOTE

Contrast Ratio

Response Time

(Black/White)

Center point Transmittance T%

Transmittance uniformity

(13pts)

Horizontal x

Viewing

Angle

Color

Coordinate

at center

point

(y=0ш)

Verti ca l y

(x=0ш)

Red

Green

Blue

White

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

o

25r2

50r10

CR

Tr x=y=0ш
Tf x=y=0ш

ӬT%

Right

Left 75

Up 70

Down

Rcx x=y=0ш 0.649 ­Rcy x=y=0ш 0.332 ­Gcx x=y=0ш 0.274 ­Gcy x=y=0ш 0.589 ­Bcx x=y=0ш 0.148 -

Bcy x=y=0ш 0.101 ­Wcx x=y=0ш 0.320 ­Wcy x=y=0ш

x=y=0ш

CS-1000T

x=y=0ш

CS-1000T

x=y=0ш - 1.25 1.4 - 6,1

CRɪ10
BM-5A

600 850

--- 1.5 6.5

--- 3.5 8.5

5.4 6.0 - % 7,1

75 85

85
80

70

Typ

-0.03

80

0.356

- % 4,1

- Deg

- Deg

- Deg

- Deg

Typ

+0.03

C

%RH

ms 5,1
ms

2,3,1

2,0

-

Note (0)

Light source is the standard light source “C” which is defined by CIE and driving voltages are based on

suit

able gamma voltages. The calculating method is as followingǺ

1.Measure Module’s and BLU’s spectrums. White is without

BLU is supplied by CMO.

2.Calculate cell’s spectrum.

3.Calculate cell’s chromaticity by using the sp

Version 2.0

ectrum of standard light source “C”

/16

8

signal input and R, G, B are with signal input.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Note (1)

Light source is the BLU which is supplied by CMO and driving voltages are based on suitable gamma

voltages. White is without signal input and R, G, B are with signal input. SPEC is judged by CMO’s golden sample .

Note (2) : Measurement setup:

The LCD module should be stabilized at given temperature for

change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting

backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

USB2000

Field of View = 2º

Center of the Screen

500 mm

20 minutes to avoid abrupt temperature

CS-1000T

Light Shield Room

(Ambient Luminance < 2 lux)

/16

9

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (3) : Definition of viewing angle (x ,y):

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Note (4) : Definition of Contrast Ratio (CR):

Ratio of gray max (Gmax), gray min (Gmin), at the center point of panel.

Luminance with all pixel white (Gmax)

CR =

Luminance with all pixel Black (Gmin)

Note (5) : Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 255

R, TF):

T

R

Gray Level 0

Gray Level 255

Time

T

F

66.67ms

/16

10

66.67ms

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (6) : Definition of Transmittance Variation (GT%):

Measure the transmittance at 13 points

T% =

Maximum [T%(1), T%(2), … T%(13)]

Minimum [T%(1), T%(2), … T%(13)]

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

D/10

W

W/10

W/4

W/2

3W/4

Vertical Line

6 8

9

9W/10

11 12 13

Note (7) : Definition of Transmittance(T%):

Module is without signal input.

BLU is Supplied by CMO .

D

D/4 D/2 3D/4

7

2 3

1

4

Active Area

5

9D/10

10

X

: Test Point

X=1 to 13

Transmittance

Luminance of LCD module

=

Ϡ 100%

Luminance of backlight

/16

11

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. PACKAGING

6.1.PACKING SPECIFICATION

1. 20 pcs LCD panel / 1 Box

2. Box Dimension :472 (L) X376 (W) X 617(H) mm

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

3. Weight : Approximately 26.9Kg (4

6.2 PACKING METHOD

0 cells per Carton)

W
9

1

W
9

1

W

9

1

W

9

1

W
9
1

Figure. 6-1 Packing method

]

/16

12

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Figure. 6-2 Packing method

/16

13

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. DEFINITION OF LABEL

1. Mode Name: M190A1- C03

2. Panel Type: version control

3. Quantity: 19pcs / PP box

4. Case ID: serial number.

5. Note: Notification, if necessary.

6. Barcode: Case ID in code39 format

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

Figure. 7-1 Carton Label

/16

14

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

DOC NO: 24079023

Issue Date: Sep. 03 2007

Model No.: M190A1-C03

Approval

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

1. Do not apply rough force such as bending or twisting to the cell during assembly.

2. To assemble or install cell into customer’s module can be only in clean working areas. The dust and

oil may cau

3. It’s not permitted to have pressure or impulse on the module be

will be damaged.

4. Use a soft dry cloth without chemicals for cleaning, becau

easily scratched.

5. It is dangerous that moisture come into or cont

TFT circuit .

6. High temperature or humidity may reduce the perfo

specified storage conditions.

8.2 SAFETY PRECAUTIONS

se electrical short or worsen the polarizer.

cause the LCD panel and Backlight

se the surface of polarizer is very soft and

acted the LCD panel, because moisture may damage

rmance of cell. Please store LCD cell within the

1. If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

/16

15

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com