The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Change Model No. dash code: M180E1 - 01àM180E1 - L01
Add weight maximum value.
Absolute Ratings Of Environment notes (1), (2) update.
Shock maximum value update.
Update Color Chromaticity:
Eliminated all blanket symbol of color chromaticity.
12
Add boss at module rear side.
(250)(Typ)/(200)(Min) à (220)(Typ)/200(Min)
: (15)(Typ.)/TBD(Max)à20(Typ.)/30(Max)
R
: TBD(Max)à25(Max)
F
1.5
3.1
3.2
3.2/4.2
5.1
5.2
7.1
7.2
9/10/11
1.5
2.1
7.2
3 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.1
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M180E1 - L01 is an 18.0” TFT Liquid Crystal Display module with 6 CCFL Backlight unit and 30 pins
2ch-LVDS interface. This module supports 1280 x 1024 SXGA mode and can display 16.7M colors. The
inverter module for Backlight is not built in.
1.2 FEATURES
- Wide viewing angle
- High contrast ratio
- Fast response time
- High color saturation
- SXGA (1280 x 1024 pixels) resolution
www.panelook.com
Issued Date: Aug. 16, 2001
Model No.: M180E1 - L01
Approval
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 357.12 (H) x 285.696 (V) (18.0” diagonal) mm
Bezel Opening Area 361.1 (H) x 289.7 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 1024 pixel Pixel Pitch 0.279 (H) x 0.279 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Transmissive Mode Normally black - Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 403.5 404.0 404.5 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 321.7 322.2 322.7 mm
Depth(D) - 20.2 21.2 mm
Weight - 2500 2550 g -
(1)
(1)
4 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.1
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
(d) The measured point should be not more than 2cm from module surface.
Note (2) The temperature of panel display area surface should be 0 ºC Min. and 60 ºC Max.
www.panelook.com
Issued Date: Aug. 16, 2001
Model No.: M180E1 - L01
Approval
Value
Min. Max.
- 50 G (3), (5)
NOP
- 2.0 G (4), (5)
NOP
Unit Note
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 0.5 Hr, 4 times each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
Storage Range
5
Temperature (ºC)
5 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8060 -20 400 20-40
Version 3.1
www.panelook.com
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V
Logic Input Voltage VIN -0.3 4.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL - 2.5K V
Lamp Current IL - 6.5 MA
Lamp Frequency FL - 80 KHz
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Issued Date: Aug. 16, 2001
Model No.: M180E1 - L01
(1)
(1), (2), IL = 6.0 mA
RMS
RMS
(1), (2)
Approval
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
6 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 16, 2001
Model No.: M180E1 - L01
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I
- - 3.5 A (2)
RUSH
White - 1320 1600 mA (3) a
Power Supply Current
Black - 820 980 mA (3) b
Vertical Stripe
lcc
- 1150 1400 mA (3) c
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic - 1.2 - V
Logic “L” input voltage (SELLVDS) Vil Vss - 0.8 V
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
Value
Unit Note
Approval
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470ms
+5.0V
0.9Vcc
0.1Vcc
GND
470ms
7 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 16, 2001
Model No.: M180E1 - L01
Approval
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
B
B
B
R
R
R
G
G
G
B
B
B
R
R
= 60
v
RR
Active Area
G
B
G
B
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
1
2
1
2
1
2
Value
Unit Note
I
RMS
o
C)V
o
C)V
A
RMS
(2)
RMS
(2)
RMS
Inverter
A
A
= 6.0 mA
L
(1)
Current Meter
YOKOGAWA 2016
Parameter Symbol
Lamp Input Voltage VL 640 675 710 V
Lamp Current IL 6.0 mA
Lamp Turn On Voltage VS
Operating Frequency FL 35 50 80 KHz (3)
Lamp Life Time LBL 50,000 60,000 - Hrs (5)
Power Consumption PL - 24.3 - W (4), IL = 6.0 mA
Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:
LCD
Module
Min. Typ. Max.
- 1005 (25
- 1305 (0
HV (Pink)
LV (White)
HV (Blue)
LV (White)
HV (Pink)
LV (White)
A
8 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.1
www.panelook.com
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.