How it Works
CMO
Loading...
M170E7-L01
Specification
28 pgs1.09 Mb0

CMO M170E7-L01 Specification

Download
Page 1
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
- CONTENTS -
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 11
------------------------------------------------------- 12
------------------------------------------------------- 15
------------------------------------------------------- 17
------------------------------------------------------- 23
------------------------------------------------------- 25
------------------------------------------------------- 26
------------------------------------------------------- 27
2 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
REVISION HISTORY
Version Date Section Description
M170E7-L01 approval specification was first issued.
Ver. 3.0
Ver. 3.1
Ver. 3.2
Jul. 21, 05
Sep. 26, 05
Sep. 27, 05
-
7.2
7.2
To modify “Viewing Angle” value in “OPTICAL SPECIFICATIONS” table.
To modify “Viewing Angle” value in “OPTICAL SPECIFICATIONS” table.
3 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M170E7-L01 model is a 17.0 inch TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin
2ch-LVDS interface. This module supports 1280 x 1024 SXGA mode and displays 16.2M colors. The
inverter module for the Backlight Unit is not built in.
1.2 FEATURES
- Wide viewing angle
- High contrast ratio
- Fast response time
- High color saturation (EBU Like Specifications)
- SXGA (1280 x 1024 pixels) resolution
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- Compact size and slim border
- RoHS compliance
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Active Area 337.92 (H) x 270.34 (V) (17.0” diagonal) mm Bezel Opening Area 340.92 (H) x 273.34 (V) mm Driver Element a-si TFT active matrix - ­Pixel Number 1280 x R.G.B. x 1024 pixel ­Pixel Pitch 0.264 (H) x 0.264 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 16.2M color ­Transmissive Mode Normally white - ­Surface Treatment Hard coating (3H), AG (Haze 25%) - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 354.42 354.92 355.42 mm
Module Size
I/F connector mounting
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 289.84 290.34 290.84 mm Depth(D) - 12.8 13.3 mm
Weight - 1825 1895 g -
position
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
(2)
(1)
(1)
(2) Connector mounting position
+/- 0.5mm
4 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V
LCD Cell Life Time L
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Value
Min. Max.
- 50 G (3), (5)
NOP
- 1.5 G (4), (5)
NOP
50,000 - Hrs
CELL
Unit Note
MTBF based
Note (3) 11ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis
Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid
enough to prevent the module from twisting or bending by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
5 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8060 -20 400 20-40
www.panelook.com
Page 6
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V Logic Input Voltage VIN -0.3 4.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL - 2.5K V Lamp Current IL - 7.5 mA Lamp Frequency FL - 80 KHz
Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum
values.
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
(1)
(1), (2), IL = 6.5 mA
RMS
RMS
(1), (2)
Approval
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
6 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V ­Ripple Voltage VRP - -- 100 mV ­Rush Current I
- -- 3.8 A (2)
RUSH
White - 420 590 mA (3)a
Power Supply Current
Black - 570 800 mA (3)b
= 75Hz,
f
V
Vcc=4.5V
lcc
- - 1200 mA (4)
LVDS differential input voltage Vid -100 - +100 mV LVDS common input voltage Vic -- 1.2 -- V Logic “L” input voltage (SELLVDS) Vil Vss - 0.8 V
Note (1) The module is recommended to operate within specification ranges listed above for normal
function.
Value
Unit Note
Approval
Note (2) Measurement Conditions:
+5.0V
R1
47K
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
Vcc
(LCD Module Input)
Vcc rising time is 470Ps
+5.0V
0.9Vcc
0.1Vcc
GND
470Ps
7 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Note (4) The specified power supply current is under the conditions at Vcc = 4.5 V, Ta = 25 ± 2 ºC, f
a. White Pattern
Active Area
Hz, whereas a power dissipation check pattern (Black Pattern) below is displayed.
Black Pattern
b. Black Pattern
Active Area
= 75
v
Active Area
8 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
3.2 BACKLIGHT UNIT
Parameter Symbol
Lamp Input Voltage VL 576 640 704 V Lamp Current IL 2.0 7.0 7.5 mA
Lamp Turn On Voltage VS
Operating Frequency FL 40 60 80 KHz (3) Lamp Life Time LBL 40,000 - - Hrs (5) IL = 7.0 mA Power Consumption PL - 17.92 - W (4), IL = 7.0 mA
Note (1) Lamp current is measured by utilizing high-frequency current meters as shown below:
LCD
Module
Min. Typ. Max.
HV (Pink)
LV (White)
HV (Blue) LV (Black)
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Value
- - 1260(25
- - 1500 (0
o
o
Unit Note
I
RMS
RMS
C) V
C) V
(2)
RMS
(2)
RMS
1 2
A
Inverter
1
2
A
Approval
= 7.0 mA
L
(1)
A
Current Meter YOKOGAWA 2016
Ta = 25 ± 2 ºC
Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.
Otherwise, the lamp may not be turned on normally.
Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the
display, which might cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronization frequency and its harmonics
as far as possible.
Note (4) P
Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
= IL × VL × 4 CCFLs
L
condition Ta = 25 2
o
C and IL = 7.0 mArms until one of the following events occurs:
(a) When the brightness becomes or lower than 50% of its original value.
(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective
ignition length is defined as an area that has less than 70% brightness compared to the
brightness in the center point.)
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter
for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too
much current leakage from high voltage output of the inverter. When designing or ordering the
inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the
inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module
should be operated in the same manners when it is installed in your instrument.
9 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
The output of the inverter must have symmetrical (negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interface with horizontal synchronous frequency and as a result this may cause beat on the
display. Therefore lamp frequency shall be as away possible from the horizontal synchronous
frequency and from its harmonics in order to prevent interference.
Requirements for a system inverter design, which is intended to have a better display performance, a
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its
leakage current.
a. The asymmetry rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within Ѕ2 ± 10%;
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
c. The ideal sine wave form shall be symmetric in positive and negative polarities.
* Asymmetry rate:
I p
-p
I
| I
* Distortion rate
I
– I –p | / I
p
(or I –p) / I
p
rms
rms
* 100%
10 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
RXEC(+/-)
NC
Vcc
GND
(JAE-FI-XB30SRL-HF11)
INPUT CONNECTOR
VL
LAMP CONNECTOR
(JST-BHSR-02VS-1)
www.panelook.com
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
SCAN DRIVER IC
TFT LCD PANEL
(1280x3x1024)
DATA DRIVER IC
BACKLIGHT UNIT
Approval
4.2 BACKLIGHT UNIT
1 HV(Pink)
2 LV(White)
1 HV(Blue)
2 LV(Black)
1 HV(Pink)
2 LV(White)
1 HV(Blue)
2 LV(Black)
11 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd) 9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC Not connecting(should keep open) 26 NC Not connecting(should keep open) 27 NC Not connecting(should keep open) 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply
Note (1) Connector Part No.: FI-XB30SRL-HF11(JAE).
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Note (2) Mating Connector Part No.:FI-X30H ; FI-X30C* ; FI-X30M* ; FI-X30HL(-T),FI-X30C*L(-T) [JAE]
Note (3) The first pixel is odd.
Note (4) Input signal of even and odd clock should be the same timing.
12 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
LVDS interface receiver required input data mapping table
LVDS Channel E0
LVDS Channel E1
LVDS Channel E2
LVDS Channel E3
LVDS Channel O0
LVDS Channel O1
LVDS Channel O2
LVDS Channel O3
LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
13 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
5.2 BACKLIGHT UNIT
Pin Symbol Description Remark
1 HV High Voltage Pink 2 LV Low Voltage White 1 HV High Voltage Blue 2 LV Low Voltage Black
Note (1) Connector Part No.:JST-BHSR-02VS-1 or equivalent(YEON HO_LOCKING TYPE 35001HS-02L)
Note (2) User’s connector Part No.: JST-SM02B-BHSS-1-TB (JST) or equivalent [35001TS-L(YEON HO)]
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Basic Colors
Gray Scale Of Red
Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)
:
: Red(253) Red(254) Red(255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(0) / Dark
Gray Scale Of Green
Gray Scale Of Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Green(1) Green(2)
:
: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)
:
: Blue(253) Blue(254) Blue(255)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
14 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc - 54 67.5 MHz -
LVDS Clock
LVDS Da t a
Vertical Active Display Term
Horizontal Active Display Term
NoteΚ(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be
Period Tc 14.8 18.5 - ns High Time Tch - 4/7 - Tc ­Low Time Tcl - 3/7 - Tc ­Setup Time Tlvs 600 - - ps ­Hold Time Tlvh 600 - - ps ­Frame Rate Fr 56 60 75 Hz Tv=Tvd+Tvb Total Tv 1034 1066 1274 Th ­Display Tvd 1024 1024 1024 Th ­Blank Tvb Tv-Tvd 42 Tv-Tvd Th ­Total Th 690 844 960 Tc Th=Thd+Thb Display Thd 640 640 640 Tc ­Blank Thb Th-Thd 204 Th-Thd Tc -
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
set to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
15 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
dT2d
dT3d
d
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the
conditions shown in the following diagram.
CC
Power Supply
0.9 V
0.9 V
CC
V
0.5msdT1d10ms
50ms
50ms
0
0
500ms
CC
0V
T
4
Signals
0V
Backlight (Recommended)
450msdT5
90msdT6
0.1V
CC
T
1
2
T
Power On
50%
T
5
Power ON/OFF Sequence
VALID
50%
T
6
3
T
Power Off
0.1V
DD
4
T
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation of the LCD turns off, the display may, instantly, function abnormally.
(3) In case of
VCC = off level, please keep the level of input signals on the low or keep a high impedance.
(4) T4 should be measured after the module has been fully discharged between power on/off periods.
(5) Interface signal shall not be kept at high impedance when the power is on.
16 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 6.5 mA Inverter Driving Frequency FL 60 KHz Inverter SUMIDA H05-5307
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
be measured under the test conditions described in 7.1 and stable environment shown in Note (6).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Green
Color Chromaticity
Blue
White
Center Luminance of White L
Contrast Ratio CR
Response Time
White Variation
Cross Talk CT
Horizontal
Viewing Angle
Vertica l
TCO’99 Luminance Uniformity
(Angular-dependent)
TCO’99 Luminance Contras
(Angular-dependent)
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
o
25r2
50r10
Rx
Ry
Gx Gy Bx
By
Wx
Wy
C
=0q, TY =0q
T
x
CS-1000
Typ –
0.03
230 300 - cd/m2(4), (6)
0.645
0.348
0.280
0.605
0.142
0.069
0.313
0.329
Typ +
0.03
450 700 - - (2), (6)
TR - 2 7 ms T
F
GW
Tx+
T
-
x
TY+
-
T
Y
L
R
C
m
T
=0q, TY =0q
x
=0q, TY =0q
T
x
BM-5A
CR Њ 5
BM-5A
ˀʳ
ˀʳ
- 6 11 ms
- 1.25 1.40 - (6), (7)
- - 2.0 % (5), (6)
80 88 ­80 88 ­70 80 ­65 80 -
- - 1.7 - (8)
0.5 - - - (9)
C
%RH
(1), (6)
(3)
Deg. (1), (6)
17 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
Note (1) Definition of Viewing Angle (Tx, Ty):
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
TX- = 90º
x-
6 o’clock
T
y- = 90º
y-
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Normal
Tx = Ty = 0º
Ty- Ty
Tx
Tx
12 o’clock direction
y+
T
y+ = 90º
x+
TX+ = 90º
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).
Note (3) Definition of Response Time (T
100%
90%
Optical
Response
Gray Level 255
10%
0%
T
R
66.68 ms
, TF) and measurement method:
R
T
F
66.68 ms
Gray Level 255
Time
18 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
A
A
y
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
L
= L (5)
C
L (x) is corresponding to the luminance of the point X at Figure in Note (7).
Note (5) Definition of Cross Talk (CT):
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
CT = | Y
Where:
Y
= Luminance of measured location without gray level 0 pattern (cd/m2)
A
Y
= Luminance of measured location with gray level 0 pattern (cd/m2)
B
(0, 0)
Y
(D/8,W/2)
A, L
Y
(D/2,7W/8)
A, D
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
– YA | / YA u 100 (%)
B
ctive Area
Gray 128
(D,W)
Y
(D/2,W/8)
A, U
Y
(7D/8,W/2)
A, R
(D/4,W/4)
Y
(D/8,W/2)
B, L
Y
(D/2,7W/8)
B, D
(0, 0)
ctive Area
Gray 0
Gra
128
Y
B, U
Y
B, R
(3D/4,3W/4)
(D,W)
(D/2,W/8)
(7D/8,W/2)
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
Center of the Screen
BM-5A
CA-1000
Field of View = 2º
500 mm
Light Shield Room
(Ambient Luminance < 2 lux)
19 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
Note (7) Definition of White Variation (GW):
Measure the luminance of gray level 255 at 9 points
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Maximum [L (1), L (2), L (3), L (4), L (5), L (6), L (7), L (8), L (9)]
GW =
Minimum [L (1), L (2), L (3), L (4), L (5), L (6), L (7), L (8), L (9)]
D/10
Horizontal Line
D
D/2
9D/10
W/10
1
2
3
X
W
W/2
4
5
6
: Test Point
X=1 to 9
Vertical Line
9W/10
7 8 9
Active Area
20 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
W
Note (8) Definition of TCO 99 Luminance Uniformity (Angular-dependent) (LR):
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
D/2
D/2
W/2
W/2
0.1 D
D
0.1 D
Luminance is measured at the center measurement position “C” on the LCD panel. The optical
axis of the luminance meter shall be aligned with the normal of the panel surface. The measuring
distance between the photometer and the surface of the panel is defined as:
Md (cm) = diagonal of the panel (cm) X 1.5 with minimum distance 50 cm.
The panel is rotated around a vertical axis which passes the center of the display by changing
the azimuthal angle to +30q. The distance between the panel and the photometer remains
unchanged and the measured point is exact the same as the previous measured point.
The photometer is then rotated by changing its azimuthal angle with the fixed distance to the
panel. Luminance at points “L” and “R” are given:
LCD panel
30q
R
L
L
min, +30
min, +30
q
q and L
max, +30
q
C
Md
Photometer
L
L
max, +30
The LCD panel is then rotated to another azimuthal angle to -30q; and L
q
min, -3T
q and L
max, -30
q
are obtained by using the same procedure.
The Luminance Uniformity (L
R) is calculated as follow:
L
R = ((L
max, +30
q/ L
min, +30
q)+( L
max, -30
q/ L
min, -30
q)) / 2.
21 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
Note (9) Definition of TCO 99 Luminance Contrast (Angular-dependent) (Cm):
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
W
Luminance contrast is measured at the center point of the LCD panel “C” along with the normal
of the display with the same distance described in Note 13. The display is then rotated around
the vertical axis by changing its azimuthal axis to +30q; and this gives:
D/2
L
255
G. L ., + 30
D
q and L
D/2
0 G.L., +30
W/2
W/2
q.
The LCD panel is then rotated to azimuthal angle to -30q; and L
are obtained by using the same procedure. The Luminance Contrast (Cm) is calculated:
For both +30q and -30q. The lower value for Cm is reported.
LCD panel
30q
C
Cm = (L
255
G. L .
- L
0 G.L.
)/ (L255
Photometer
+ L
G. L .
0 G. L., -30
)
0 G.L
q and L
255 G.L., -30
q
22 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 5 LCD modules / 1 Box
(2) Box dimensions: 470(L) X 268(W) X 430(H) mm
(3) Weight: approximately 10.5 Kg (5 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
Non Operation
˟˖˗ʳˠ˷˿˸
ˣ˘ʳ˕˴˺
˖˻˼ʻ˦˼˷˸ʼ
˖˻˼ʻ˨ˣʼ
˗˥˜˘˥
˖˴ 
˖˴ʳ˟˴˵˸˿
Figure. 8-1 Packing method
23 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
ˣ˘ʳ˦˻˸˸
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
˖˸ʳˣ˸˶ˍ˟˄˄ˊ˃ʳˈ˃ʽˈ˃
ˣ˴˿˿˸ˍ˟˄˄˃˃ʽ˪ˌˊ˃ʽ˛˄ˆˈ
ˣ˴˿˿˸ʳ˦˶˾ʳ˗˼ˍ˟˄˄˃˃ʽ˪ˌˊ˃ʽ˛˄ˇˆˈ ˪˸˼˺˻ˍ˔ˁʳ˅ˋ˃˾˺
˖˸ʳˣ˸˶
˙˼˿
˖˴ʳ˟˴˵˸˿
ˣˣʳ˕˸˿
ˣ˴˿˿˸
Figure. 8-2 Packing method
24 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
(a) Model Name: M170E7-L01
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
(c) CMO barcode definition:
Serial ID: XX
Code Meaning Description
XX CMO internal use ­XX Revision Cover all the change
X CMO internal use -
XX CMO internal use -
YMD
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence of product
(d) Customer’s barcode definition:
Serial ID: CM
Code Meaning Description
CM Supplier code CMO=CM
17E71 Model number M170E7-L01=17E71
X Revision code Non ZBD: 0~9, ZBD: A~Z
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan, Taiwan=TN
L Cell line # 0~12=0~C
XX Module location Tainan, Taiwan=TN
L Module line # 0~12=0~C
YMD
NNNN Serial number By LCD supplier
-XX-X-XX-YMD-L-NNNN
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
-17E71-X-X-X-XX-L-XX-L-YMD-NNNN
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V
25 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 27, 2005
Model No.: M170E7-L01
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight
will be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly, and the starting voltage of CCFL will be higher than room
temperature.
10.2 SAFETY PRECAUTIONS
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
26 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 28
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use