CMO M170E5-L0A Specification

Global LCD Panel Exchange Center

ಖᙕ

ՠ܂

ᐉு

ߡۥ

ދป

A

TFT LCD Approval Specification

MODEL NO.: M170E5-L0A

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Customer : Fujitsu

pproved by :

Note :



2006-11-23 14:54:35 CST



Approve by Dept. Mgr.(QA RA)



tomy_chen(ຫةԫ /52720/54140/43150)



Department Manager(QA RA)

Accept



2006-11-17 16:17:26 CST

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Approve by Director

kf_huang(႓഼୽ /56620/54380/14906/25075)

1 / 26

Director Accept

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

- CONTENTS -

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

------------------------------------------------------- 4

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM ------------------------------------------------------- 11

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.4 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 15

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 17

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING ------------------------------------------------------- 23

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ------------------------------------------------------- 25

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL CHARACTERISTICS

------------------------------------------------------- 26

------------------------------------------------------- 27

2 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

Version Date Section Description

-

Ver. 1.0

Ver. 1.1

Ver. 1.2

Ver. 3.0

Ver. 3.1

Ver. 3.2

Ver. 3.3

Oct. 18 ’04

Nov. 9 ‘04

Nov. 17 ‘04

Feb. 17 ‘05

Mar. 25 ‘05

Apr. 01 ‘05

Nov.,17 ‘06

1.2

1.5

3.0

3.2

7.1

7.2

4.1

5.1

9.1

M170E5-L0A Specifications was first issued.

Add item “Glare type polarizer” in features description.

To modify “weight” value in “Mechanical specifications table“.

To modify “weight” value in “Mechanical specifications table”.

To modify “weight” value in “packing specifications”.

To modify “CMO label position” in the mechanical characteristics.

11

To modify “Operating Frequency” value in “Lamp specification table”.

To add “Inverter Driving Frequency” item in “Test Condition table”.

To modify description and drawing in “Note(3)”.

To change the “input connector” Part No..

To change the “Note (1) Connector Part No.”. To change the version of label from 03AШ04A.

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

3 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M170E5-L0A model is a 17.0” TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin

2ch-LVDS interface. This module supports 1280 x 1024 SXGA mode and displays 16.2M colors. The

inverter module for the Backlight Unit is not built in.

1.2 FEATURES

- Wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation (EBU Like Specifications)

- SXGA (1280 x 1024 pixels) resolution

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- Glare type polarizer

1.3 APPLICATION

- TFT LCD Monitor

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 337.92 (H) x 270.34 (V) (17.0” diagonal) mm Bezel Opening Area 341.9 (H) x 274.4 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 1024 pixel Pixel Pitch 0.264 (H) x 0.264 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.2M color Transmissive Mode Normally white - Surface Treatment Hard coating (3H), Glare - -

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 358.0 358.5 359.0 mm

Module Size

I/F connector mounting

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 296.0 296.5 297.0 mm Depth(D) - 17.0 17.5 mm

Weight - 2355 2430 g -

position

The mounting inclination of the connector makes

the screen center within ±0.5mm as the horizontal.

(2)

(1)

(2) Connector mounting position

+/- 0.5mm

4 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

LCD Cell Life Time L

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Value

Min. Max.

- 50 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

50,000 - Hrs

CELL

Unit Note

MTBF based

Note (3) 11ms, half-sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis

Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid

enough to prevent the module from twisting or bending by the fixture.

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20

Storage Range

5

Temperature (ºC)

5 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8060-20 400 20-40

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6.0 V Logic Input Voltage VIN -0.3 4.3 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2.5K V Lamp Current IL - 7.5 mA Lamp Frequency FL - 80 KHz

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum

values.

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Unit Note

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

(1)

(1), (2), IL = 6.5 mA

RMS

(1), (2)

Note (2) Specified values are for lamp (Refer to 3.2 for further information).

6 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 100 mV Rush Current I

- -- 3.8 A (2)

RUSH

White - 420 590 mA (3)a

Power Supply Current

Black - 570 800 mA (3)b

= 75Hz,

f

V

Vcc=4.5V

lcc

- - 1200 mA (4)

LVDS differential input voltage Vid -100 - +100 mV LVDS common input voltage Vic -- 1.2 -- V Logic “L” input voltage (SELLVDS) Vil Vss - 0.8 V

Note (1) The module is recommended to operate within specification ranges listed above for normal

function.

Value

Unit Note

Approval

Note (2) Measurement Conditions:

+5.0V

R1

47K

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R2

1K

47K

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

Vcc

(LCD Module Input)

Vcc rising time is 470Ps

+5.0V

0.9Vcc

0.1Vcc

GND

470Ps

7 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

a. White Pattern

Active Area

Note (4) The specified power supply current is under the conditions at Vcc = 4.5 V, Ta = 25 ± 2 ºC, f

Hz, whereas a power dissipation check pattern (Black Pattern) below is displayed.

Black Pattern

b. Black Pattern

Active Area

= 75

v

Active Area

8 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3.2 BACKLIGHT UNIT

Parameter Symbol

Lamp Input Voltage VL 585 650 715 V Lamp Current IL 2.0 6.5 7.0 mA

Lamp Turn On Voltage V

Operating Frequency FL 40 60 80 KHz (3) Lamp Life Time LBL 50,000(25 oC) --- --- Hrs (5) IL = 6.5 mA Power Consumption PL - 16.9 - W (4), IL = 6.5 mA

Note (1) Lamp current is measured by utilizing high-frequency current meters as shown below:

S

www.panelook.com

Value

Min. Typ. Max.

- - 1260(25

- - 1500 (0

o

Unit Note

RMS

C) V

RMS

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

I

RMS

(2) (2)

= 6.5 mA

L

(1)

LCD

Module

HV (Pink)

LV (White)

HV (Blue) LV (Black)

1 2

A

Inverter

A

Current Meter YOKOGAWA 2016

1

2

A

Ta = 25 ± 2 ºC

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.

Otherwise, the lamp may not be turned on normally.

Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the

display, which might cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronization frequency and its harmonics

as far as possible.

Note (4) P

Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the

= I

L

LVL

condition Ta = 25 2

o

C and IL = 2.0 ~ 6.5 mArms until one of the following events occurs:

(a) When the brightness becomes or lower than 50% of its original value.

(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective

ignition length is defined as an area that has less than 70% brightness compared to the

brightness in the center point.)

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter

for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrument.

9 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

The output of the inverter must have symmetrical (negative and positive) voltage waveform and

symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter

which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may

produce interface with horizontal synchronous frequency and as a result this may cause beat on the

display. Therefore lamp frequency shall be as away possible from the horizontal synchronous

frequency and from its harmonics in order to prevent interference.

Requirements for a system inverter design, which is intended to have a better display performance, a

better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its

leakage current.

a. The asymmetry rate of the inverter waveform should be 10% below;

b. The distortion rate of the waveform should be within Ѕ2 ± 10%;

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

c. The ideal sine wave form shall be symmetric in positive and negative polarities.

* Asymmetry rate:

I p

I -p

| I

* Distortion rate

I

– I –p | / I

p

(or I –p) / I

p

rms

* 100%

10 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

RXO0(+/-)

RXO1(+/-)

RXO2(+/-)

RXO3(+/-)

RXOC(+/-)

RXE0(+/-)

RXE1(+/-)

RXE2(+/-)

RXE3(+/-)

RXEC(+/-)

SELLVDS

Vcc

GND

VL

(JAE FI-XB30SSRL-HF16)

INPUT CONNECTOR

LAMP CONNECTOR

(JST-BHSR-02VS-1)

4.2 BACKLIGHT UNIT

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1280x3x1024)

DATA DRIVER IC

BACKLIGHT UNIT

1 HV(Pink)

1 HV(Blue)

1 HV(Pink)

1 HV(Blue)

2 LV(White)

2 LV(Black)

2 LV(White)

2 LV(Black)

11 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd) 9 RXOC+ Positive LVDS differential clock input. (odd)

10 RXO3- Negative LVDS differential data input. Channel O3(odd)

11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 TEST Test pin should be tied to ground. 26 NC Not connection. 27 SELLVDS SELLVDS pin should be tied to ground or open. 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply

Note (1) Connector Part No.: ),;%665/+) (JAE).

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Note (2) Mating Connector Part No.:FI-X30H ; FI-X30C* ; FI-X30M* ; FI-X30HL(-T),FI-X30C*L(-T) [JAE]

Note (3) The first pixel is odd.

Note (4) Input signal of even and odd clock should be the same timing.

12 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

SELLVDS = Low or Open

LVDS Channel E0

LVDS Channel E1

LVDS Channel E2

LVDS Channel E3

LVDS Channel O0

LVDS Channel O1

LVDS Channel O2

LVDS Channel O3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

13 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.2 BACKLIGHT UNIT

Pin Symbol Description Remark

1 HV High Voltage Pink 2 LV Low Voltage White 1 HV High Voltage Blue 2 LV Low Voltage Black

Note (1) Connector Part No.: JST-BHSR-02VS-1 or equivalent

Note (2) User’s connector Part No.: JST-SM02B-BHSS-1-TB (JST) or equivalent

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Basic Colors

Gray Scale Of Red

Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

0

1

0

1

0

:

1

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

Green(0) / Dark Green(1)

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

14 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc - 54 67.5 MHz -

LVDS Clock

LVDS Da t a

Vertical Active Display Term

Horizontal Active Display Term

NoteΚ(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

Period Tc 14.8 18.5 - ns High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 56 60 75 Hz Tv=Tvd+Tvb Total Tv 1034 1066 1274 Th Display Tvd 1024 1024 1024 Th Blank Tvb Tv-Tvd 42 Tv-Tvd Th Total Th 690 844 960 Tc Th=Thd+Thb Display Thd 640 640 640 Tc Blank Thb Th-Thd 204 Th-Thd Tc -

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

15 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the

conditions shown in the following diagram.

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off, the display may, instantly, function abnormally.

(3) In case of

(4) T4 should be measured after the module has been fully discharged between power on/off periods.

(5) Interface signal shall not be kept at high impedance when the power is on.

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

16 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current IL 6.5 mA Inverter Driving Frequency FL 60 KHz Inverter Sumida H05-5307

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

www.panelook.com

25r2

50r10

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

o

C

%RH

be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Rx Ry Gx Gy Bx

By Wx Wy

Color Chromaticity

Red

Green

Blue

White

Center Luminance of White L Contrast Ratio CR

Response Time

White Variation

TR --- 2 4 ms T

GW

Cross Talk CT

Horizontal

Viewing Angle

Vertica l

Tx+

T TY+

T

Y

Typ -

=0q, TY =0q

T

x

0.03

CS-1000

C

300 400 --- cd/m2(4), (6) 400 500 --- - (2), (6)

T

=0q, TY =0q

F

x

=0q, TY =0q

T

x

BM-5A

65 75 ---

-

x

CRt10 BM-5A

-

65 75 --60 70 --50 60 ---

0.645

0.348

0.280

0.605

0.142

0.071

0.313

0.329

Typ +

0.03

-

--- 8 12 ms

--- 1.25 1.40 - (6), (7)

--- --- 2.0 % (5), (6)

Deg. (1), (6)

(1), (6)

(3)

17 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Definition of Viewing Angle (Tx, Ty):

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Normal

Tx = Ty = 0º

Ty- Ty

TX- = 90º

6 o’clock

T

y- = 90º

x-

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

Tx

Tx

y+

12 o’clock direction

T

y+ = 90º

x+

TX+ = 90º

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 255

T

R

66.68 ms

, TF) and measurement method:

R

T

F

66.68 ms

18 / 26

Gray Level 255

Time

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

A

y

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Note (4) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point

L

= L (5)

C

L (x) is corresponding to the luminance of the point X at Figure in Note (7).

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YAu 100 (%)

B

Where:

Y

= Luminance of measured location without gray level 0 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 0 pattern (cd/m2)

B

ctive Area

Gray 128

Y

A, U

Y

A, R

(D,W)

Y

(D/8,W/2)

A, L

Y

(D/2,7W/8)

A, D

(0, 0)

):

C

(D/2,W/8)

(7D/8,W/2)

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

(0, 0)

ctive Area

Gray 0

Gra

128

Y

B, U

Y

B, R

(3D/4,3W/4)

(D,W)

(D/2,W/8)

(7D/8,W/2)

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

Field of View = 2º

500 mm

BM-5A

CS-1000

Light Shield Room

(Ambient Luminance < 2 lux)

19 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (7) Definition of White Variation (GW):

Measure the luminance of gray level 255 at 9 points

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

GW =

Maximum [L (1), L (2), L (3), L (4), L (5), L (6), L (7), L (8), L (9)]

Minimum [L (1), L (2), L (3), L (4), L (5), L (6), L (7), L (8), L (9)]

Horizontal Line

D

9D/10

3

6

X

: Test Point

X=1 to 9

W

W/10

W/2

D/10

1

4

D/2

2

5

Vertical Line

9W/10

7 8 9

Active Area

20 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 5 LCD modules / 1 Box

(2) Box dimensions: 537(L) X 316(W) X 462(H) mm

(3) Weight: approximately 12Kg (5 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Non Operation

LCD Module

Anti-static Bag

PP Foam(Bottom)

PP Foam(Top)

DRIER

Cart on

Carton Label

21 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

Figure. 8-1 Packing method

Corner Protector:L1170 50mm*50mm

Pallet:L1100*W970*H135mm Pallet Stock Dim:L1100*W970*H1560mm

Weight:Appprox. 350kg

PE Sheet

Film

Carton Label

Corner Protector

PP Belt

Pallet

Figure. 8-2 Packing method

22 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

A

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

CHI MEI

OPTOELECTRONICS

04

(a) Model Name: M170E5 -L0A

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) Serial ID: X X

X X X X X Y M D L N N N N

M170E5 -L0A Rev. XX

X X X X X X X Y M D L N N N N

CP235916-01

MADE IN TAIWAN

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

E207943

MADE IN TAIWAN

Serial ID includes the information as below:

(a) Manufactured Date: Year: 1~9, for 2000~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: Cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

st

to 31st, exclude I ,O, and U.

Revision

CMO Internal Use

23 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Doc No.:

Issued Date: Nov. 17, 2006

Model No.: M170E5-L0A

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight

will be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.

(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

24 / 26

Version 3.3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

CMO M170E5-L0A Specification

Specifications and Main Features

Frequently Asked Questions

User Manual