How it Works
CMO
Loading...
M170E4-L02
Specification
28 pgs1.01 Mb0

CMO M170E4-L02 Specification

Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL CHARACTERISTICS
www.panelook.com
- CONTENTS -
------------------------------------------------------- 3
------------------------------------------------------- 5
------------------------------------------------------- 6
------------------------------------------------------- 8
------------------------------------------------------- 11
------------------------------------------------------- 12
------------------------------------------------------- 15
------------------------------------------------------- 17
------------------------------------------------------- 23
------------------------------------------------------- 25
------------------------------------------------------- 26
------------------------------------------------------- 27
rd
Issued Date: JAN. 03 Model No.: M170E4 -L02
, 2002
Approval
2 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
rd
Issued Date: JAN. 03
, 2002
Approval
REVISION HISTORY
Version Date Section Description
0.0
1.0
1.1
2.0
Jun., 13, 01’
Dec., 19, 01’
Jan.,02,02’
Jan.,25,02’
1.2
2.1
3.1
3.2
6.1
7.1
8
9
11
3.1
M170E4-L02 Specifications was first issued.
Wide viewing angle with biaxial polarizerÆwide viewing angle.
ABSOLUTE RATINGS OF ENVIRONMENT
1. Storage Temperature T
2. Operating Ambient Temperature T
ST (-20)(Min.)/(+60)(Max.)Æ-20(Min.)/+60(Max.)
OP (+50)(Max.)Æ+50(Max.)
3. Note (3) 6msÆ11ms
TFT LCD MODULE
1. Delete Ripple Voltage
2. Rush Current I
RUSH 1.56 (Typ.)/TBD(Max.)Æ- (Typ.)/1.8(Max.)
3. Power Supply Current White 1250(Typ.)/TBD(Max.)Æ950(Typ.)/1050(Max.)
4. Power Supply Current Black 760(Typ.)/TBD(Max.)Æ480(Typ.)/530(Max.)
5. Power Supply Current Vertical Stripe 1070(Typ.)/TBD(Max.)
Æ820(Typ.)/900(Max.)
BACKLIGHT UNIT
1. Lamp Input Voltage 630(Min.)/710(Typ.)/790(Max.)
Æ 605(Min.)/675(Typ.)/745(Max.)
2. Lamp Current 2.0(Min.)/6.0(Typ.)/6.5(Max.)Æ 6(Min.)/12(Typ.)/13(Max.)
3. Lamp Turn On Voltage 1050(25ΖC)(Max.)Æ1000(25ΖC)(Max.)
4. Lamp Turn On Voltage 1350(0ΖC)(Max.)Æ1300(0ΖC)(Max.)
5. Power Consumption 19.5(Typ.)Æ16.2(Typ.)
INPUT SIGNAL TIMING SPECIFICATIONS
1. LVDS Clock Frequency 31(Min.)/79(Max.)Æ40(Min.)/67.5(Max.)
2. LVDS Clock Period 12.6(Min.)/32.2(Max.)Æ14.8(Min.)/25(Max.)
3. Vertical Active Display Term Frame Rate 85(Max.)Æ75(Max.)
Add Note (2).
OPTICAL SPECIFICATIONS
1. Revising White Variation: 1.25 (Typ.) & 1.40 (Max) Æ 1.18 (Typ.) & 1.25
(Max) & Note (7)
2. Revising Color Chromaticity
3. Adding TCO’99 specifications
4. Adding Note (9).
5. Adding Note (10).
Revising PRECAUTIONSÆ10. PRECAUTIONS
Adding PACKAGING
Adding DEFINITION OF LABELS
Revising outline drawing.
TFT LCD MODULE:
1. LVDS differential input voltage Vid 100 (Min.)/600 (Max.)Æ
-100 (Min.)/+100(Max.)
2. Power Supply Current White lcc 950 (Typ.)/1050 (Max.)Æ1000 (Typ.)/1200
(Max.)
3 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
rd
Issued Date: JAN. 03
, 2002
Approval
REVISION HISTORY
Version Date Section Description
2.0
2.1
2.2
2.3
3.0
Jan.,25,02’
Mar.,26,02’
May, 10, 02’
th
Jul, 10
, 02”
rd
Jan, 3
,03”
3.1
6.1
7.2
11
1.1 & 1.4
8.2
5.1
11
ALL
1.5
2.1
2.2
3.1
3.2
3. Power Supply Current Black lcc 480 (Typ.)/530 (Max.)Æ540 (Typ.)/800
(Max.).
4. Power Supply Current Vertical Stripe lcc 820 (Typ.)/900 (Max.)Æ
860 (Typ.)/1050 (Max.).
5. Rush Current I
RUSH 1.8 (Max.)Æ3.8 (Max.).
6. Note (3) Add Fc=54MHz.
Revising INPUT SIGNAL TIMING SPECIFICATIONS.
Revising OPTICAL SPECIFICATIONS
1. Contrast Ratio CR 350(Min.)Æ400(Min.)
2. Response Time T
3. Response Time T
R Æ20(Max.)
F Æ15(Max.)
4. Viewing Angle Horizontal Ӱx+/Ӱx- Æ80(Min.)
5. Viewing Angle Vertical Ӱ
Y+/ӰY- Æ80(Min.)
Revising MECHANICAL CHARACTERISTICS
Display Colors 16M Æ 16.7M
Figure. 8-2 Packing Method
Add connector type FI-X30S-HF (JAE) Æ FI-X30S-HF (JAE) or equivalent
Revising MECHANICAL CHARACTERISTICS
Approval Specification.
Adding I/F connector Mounting Position Specification.
Adding LCD Cell Life Time Specification.
Updated Maximum Lamp Current Specification.
Adding f
= 75Hz Power Supply Current Specification.
V
1. Lamp Input Voltage: 605, 675 & 745 Æ 616, 685 & 754
2. Lamp Current: 6, 12 & 13 Æ 4, 13 & 14
3. Lamp Turn On Voltage:1000 (25к) & 1300 (0к) Æ 1310 (25к) &1600 (0 к)
4. Operating Frequency: 45 (min) Æ 40 (min)
5. Lamp Life Time: 40,000 (min) Æ 50,000 (min)
6. Power Consumption: 16.2 (typ) Æ 17.81 (typ)
4 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M170E4 -L02 is a 17.0” TFT Liquid Crystal Display module with 4 CCFL Backlight unit and 30 pins
2ch-LVDS interface. This module supports 1280 x 1024 SXGA mode and can display 16.7M colors. The
inverter module for Backlight is not built in.
1.2 FEATURES
- Wide viewing angle
- High contrast ratio
- Fast response time
- High color saturation
- SXGA (1280 x 1024 pixels) resolution
www.panelook.com
rd
Issued Date: JAN. 03 Model No.: M170E4 -L02
, 2002
Approval
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Active Area 337.92 (H) x 270.34 (V) (17.0” diagonal) mm Bezel Opening Area 342 (H) x 274.5 (V) mm Driver Element a-si TFT active matrix - ­Pixel Number 1280 x R.G.B. x 1024 pixel ­Pixel Pitch 0.264 (H) x 0.264 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 16.7M color ­Transmissive Mode Normally black - ­Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 383 383.5 384 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) 305.5 306 306.5 mm Depth(D) - 20 20.5 mm
Weight - 2200 g -
(1)
(1)
(2) Connector mounting position
+/- 0.5mm
5 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V
LCD Cell Life Time L
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
www.panelook.com
rd
Issued Date: JAN. 03 Model No.: M170E4 -L02
, 2002
Approval
Value
Min. Max.
- 50 G (3), (5)
NOP
- 2.0 G (4), (5)
NOP
50,000 - Hrs
CELL
Unit Note
MTBF based
Note (3) 11ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 0.5 Hr, 4 times each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (6) Operating or test must be done below the absolute maximum ratings.Over stress may cause panel
permanent damage or performance degradation, even the over stress situation released.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
Storage Range
5
Temperature (ºC)
6 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8060 -20 400 20-40
www.panelook.com
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V Logic Input Voltage VIN -0.3 4.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL - 2.5K V Lamp Current IL - 7.0 mA Lamp Frequency FL - 80 KHz
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Issued Date: JAN. 03 Model No.: M170E4 -L02
(1)
(1), (2), IL = 6.5 mA
RMS
RMS
(1), (2)
rd
, 2002
Approval
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
7 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: JAN. 03 Model No.: M170E4 -L02
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V ­Rush Current I
- - 3.8 A (2)
RUSH
White - 1000 1200 mA (3)a Black - 540 800 mA (3)b
Power Supply Current
Vertical Stripe - 860 1050 mA (3)c f
= 75Hz,
V
Vcc=4.5V
lcc
- - 1650 mA
LVDS differential input voltage Vid -100 - +100 mV LVDS common input voltage Vic - 1.2 - V Logic “L” input voltage (SELLVDS) Vil Vss - 0.8 V
Note (1) The module should be always operated within above ranges.
Value
Unit Note
rd
, 2002
Approval
Note (2) Measurement Conditions:
+5.0V
R1
47K
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
Vcc
(LCD Module Input)
Vcc rising time is 470Ps
+5.0V
0.9Vcc
0.1Vcc
GND
470Ps
8 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
rd
Issued Date: JAN. 03 Model No.: M170E4 -L02
, 2002
Approval
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f
Hz, Fc =54MHz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
G
R
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
= 60
v
Active Area
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
A
Value
Inverter
o
C) V
o
C) V
Unit Note
I
RMS
(1)
RMS
(2)
RMS
(2)
RMS
Current Meter YOKOGAWA 2016
= 13 mA
L
A
Parameter Symbol
Lamp Input Voltage VL 616 685 754 V Lamp Current IL 4 13 14 mA
Lamp Turn On Voltage VS
Operating Frequency FL 40 50 80 KHz (3) Lamp Life Time LBL 50,000 - - Hrs (5) Power Consumption PL - 17.81 - W (4), IL = 13 mA
Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:
LCD
Module
Hot 1 (Pink)
Hot 2 (Blue)
GND (White)
Min. Typ. Max.
- - 1310 (25
- - 1600 (0
1
2
4
Current meter
9 / 28
. Version 3.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use