CMO M156B3-L02 Specification

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

TFT LCD Approval Specification

MODEL NO.: M156B3-L01

Customer:

Approved by:

Note:

1 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

- CONTENTS -

1. GENERAL DESCRIPTION .............................................................................................................. 3

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS .................................................................................................. 4

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

3. ELECTRICAL CHARACTERISTICS ................................................................................................. 6

3.1 TFT LCD MODULE

3.2 Vcc POWER DIP CONDITION

3.3 BACKLIGHT UNIT

4. BLOCK DIAGRAM …………............................................................................................................ 9

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

10

5. INPUT TERMINAL PIN ASSIGNMENT ….............……………………………………………….

5.1 TFT LCD MODULE

5.2 LVDS DATA MAPPING TABLE

5.3 BACKLIGHT SPECIFICATION

5.3.1 Connector type

5.3.2 Input connector pin assignment

5.4 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ….............................................................................................................. 14

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ....................................................................................................... 15

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING ………….......................................................................................................... 19

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ………….................................................................................................. 20

10. PRECAUTIONS ………….................................................................................................... 21

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

10.3 OTHER

11. MECHANICAL CHARACTERISTICS

2 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

Date Section Description

Ver. 2.0

Mar. 05, 09

-

M156B3-L02 Approval Specifications was first issued.

3 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M156B3-L01 is a 15.6” wide TFT Liquid Crystal Display module with white LED Backlight unit and 30 pins

1ch-LVDS interface. This module supports 1366 x 768 WXGA mode and can display 16.7M colors. The

converter module for Backlight is not built in.

1.2 FEATURES

- Contrast ratio 500:1

- Response time 8ms.

- WXGA (1366 x 768 pixels) resolution.

- DE (Data Enable) only mode.

- LVDS (Low Voltage Differential Signaling) interface.

- RoHS compliance.

- White LED Backlight Unit

- Low power consumption

1.3 APPLICATION

- TFT LCD Monitor

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 344.232(H) × 193.536(V) (15.6” diagonal) mm Bezel Opening Area 347.5(H)x196.8(V) mm Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.252 (H) x 0.252 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Color saturation 62 %NTSC (typ.) - Surface Treatment AG type, 3H hard coating, Haze 25 - Module Power Consumption 7.94 Watt (2)

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 363.3 363.8 364.3 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Please refer to the section 3.1 & 3.2 & 3.3 for more information of power consumption.

Vertical(V) 215.4 215.9 216.4 mm Depth(D) 10.4 10.9 11.6 mm

Weight - 1081 g -

4 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

(1)

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

p

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ู 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

- 50 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Min. Max.

Value

Unit Note

Note (3) 50G,11ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

At Room Tem

Side Mount Fixing Screw

erature

Gap=3~5mm

Bracket

LCD Module

Side Mount Fixing Screw

Stage

5 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6.0 V (1) Logic Input Voltage Vlogic -0.3 +2.8 V

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum

values.

Min. Max.

Value

Unit Note

6 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

Parameter Symbol

Ta = 25 ± 2 ºC

Value

Min. Typ. Max.

Unit Note

Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I

White - 0.31 0.37 A (3)a

Power Supply Current

Black - 0.38 0.46 A (3)b Vertical Stripe

Power Consumption P

RUSH

-

LCD

- 0.84 2 A (2)

- 0.41 0.5 A (3)c

- 2.0 - watt (4) LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic - 0.8 - V

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+5.0V

R1

47K

Q1 2SK1475

FUSE

C3

1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

R2

1K

47K

VR1

C1

1uF

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470μs

Vcc

0.9Vcc

0.1Vcc

GND

470μs

7 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

Note(4) The power consumption is specified at the pattern with the maximum current.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B

R

G

B

R

3.2 Vcc Power Dip Condition:

Dip condition:

Active Area

Td

Vcc

4.5V

4.0V

msTdVVccV 20,5.40.4 ≤≤≤

8 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

3.3 BACKLIGHT UNIT

Parameter Symbol

LED light bar Input Voltage LED light bar Lamp Current

28 33 36 VDC

V

O

-- 20 30 mA

I

Min. Typ. Max.

Value

Ta = 25 ± 2 ºC

Unit Note

(1), (Duty 100%)

=20mA

I

(1), (Duty 100%)

DC

LED Life Time LBL 25000 --- --- Hrs (2)

Power Consumption PO --- 5.94 --- W (3), IL = 180mA

Note (1) LED light bar voltage and current are measured by utilizing a high frequency current meter a

s shown below:

Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at

Ta = 25 ±2 oC and I

= 40 mA(Per package) until the brightness becomes ู 50% of its original

LED

value.

Note (3) P

O

= I

×VO × (pin #)

LED

Converter

V

LED ILED

LED

Backlight

Module

9 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

RXO0(+/-)

RXO1(+/-)

RXO2(+/-)

RXO3(+/-)

RXOC(+/-)

RXE0(+/-)

RXE1(+/-)

RXE2(+/-)

RXE3(+/-)

RXEC(+/-)

NC

Vcc

GND

(STARCONN 093G30-B2001A

or EQUIVALENT)

LVDS INPUT /

INPUT CONNECTOR

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

V

LED

SCAN DRIVER IC

TFT LCD PANEL

(1366x3x768)

DATA DRIVER IC

BACKLIGHT INPUT CNNECTOR

(Aces 91500-00801-H01)

4.2 BACKLIGHT UNIT

V

LED

10 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 NC Not connection, this pin should be open. 2 NC Not connection, this pin should be open. 3 NC Not connection, this pin should be open. 4 GND Ground

RX0- Negative LVDS differential data input. Channel 0

5

RX0+

6 7 GND Ground

RX1- Negative LVDS differential data input. Channel 1

8

RX1+

9 10 GND Ground 11 12 13 GND Ground 14 15 16 GND Ground 17 RX3- Negative LVDS differential data input. Channel 3 18 19 GND Ground 20 NC Not connection, this pin should be open. 21 NC Not connection, this pin should be open. 22 AGMODE AGMODE should be tied to ground or open. 23 GND Ground 24 GND Ground 25 GND Ground 26 Vcc +5.0V power supply 27 Vcc +5.0V power supply 28 Vcc +5.0V power supply 29 Vcc +5.0V power supply 30 Vcc +5.0V power supply

Note (1) Connector Part No.: 093G30-B2001A (STARCONN)

RX2- Negative LVDS differential data input. Channel 2 RX2+

RXCLK- Negative LVDS differential clock input. RXCLK+

RX3+

Positive LVDS differential data input. Channel 0

Positive LVDS differential data input. Channel 1

Positive LVDS differential data input. Channel 2

Positive LVDS differential clock input.

Positive LVDS differential data input. Channel 3

5.2 LVDS DATA MAPPING TABLE

LVDS Channel 0

LVDS Channel 1

LVDS Channel 2

LVDS Channel 3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order G0 R5 R4 R3 R2 R1 R0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order B1 B0 G5 G4 G3 G2 G1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA B5 B4 B3 B2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA B7 B6 G7 G6 R7 R6

11 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

5.3 BACKLIGHT

5.3.1

Connector type

Iutput connector: 91500-00801

5.3.2

Input connector pin assignment: CN2

SPECIFICATION

(Aces)

Input Connector pin assignment: CN3

(1) Input connector pin assignment: CN2

Input connector CN2

(vendor)

(Aces)

Pin Function

1

2

3

4

5 6

7

8

(type)

91500-00801

VLED (33V) VLED (33V) NC

Input voltage Power Supply + (33V.typ)

No connect

LED1 LED1 negative polarity LED2

LED2 negative polarity LED3 LED3 negative polarity LED4 LED5

LED4 negative polarity

LED5 negative polarity

(2) Input connector pin assignment: CN3

Comments

Input connector CN3

(vendor)

(Aces)

Pin Function

1

2

3

4

5 6

7

8

(type)

91500-00801

LED9 LED8 LED7 LED6 NC

NC No connect VLED (33V) VLED (33V)

LED9 negative polarity

LED8 negative polarity

LED7 negative polarity

LED6 negative polarity

No connect

Input voltage Power Supply + (33V.typ)

Comments

12 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

5.4 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Data Signal

Basic Colors

Gray Scale Of Red

Color

Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0

0

1

0

1

0

:

1

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

:

0

:

0

1

0

1

0

:

0

Green(0) / Dark

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Green(1) Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

:

0

0 0

0

:

1

0

:

0

:

1

0

:

0

1

0

1

0

:

1

0

1

0

1

13 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 60 76 96 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set

Period Tc 13 ns High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 50 60 76 Hz Tv=Tvd+Tvb Total Tv 800 806 815 Th Display Tvd 768 768 768 Th Blank Tvb Tv-Tvd 38 Tv-Tvd Th Total Th 1500 1560 1570 Tc Th=Thd+Thb Display Thd 1366 1366 1366 Tc Blank Thb Th-Thd 194 Th-Thd Tc -

to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

DE

Th

DCLK

C

DE

DATA

T

Thb

T

hd

14 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

RestartPower On Power Off

Power Supply

for LCD, Vcc

-

Interface Signal (LVDS Signal of Transmitter), V

-

Power for Lamp

Timing Specifications:

0.5< t1 ู 10 msec

0 < t2 ู 50 msec

0 < t3 ู 50 msec

0V

I

10%

t4 ฺ 500 msec

t5 ฺ 450 msec

90%

t1

t2

90%

Valid D a ta

t6 t5

50%50%

ONOFF OFF

t3

t7

10%

t4

t6 ฺ 90 msec

5 ู t7 ู 100 msec

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Apply the light bar voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off before the backlight turns off, the display may momentarily become abnormal

screen.

(3) In case of Vcc = off level, please keep the level of input signals on the low or keep a high impedance.

(4) t4 should be measured after the module has been fully discharged between power of and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

(6) CMO won’t take any responsibility for the products which are damaged by the customers not following the

Power Sequence.

(7) There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To avoid this

symptom, we suggest "Vcc falling timing" to follow "t7 spec".

15 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha

25

50

±

10

2

Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" LED Light Bar Input Current (per pin)

LED Light Bar Test Converter

IV37085/T-HF/H05-6333,Rev.01,32 V,0 V,180 mA ,Sumida Suzhou _LED

I

20

±

0.6

Converter, MP3900

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

o

C

%RH

mA

be measured under the test conditions described in 7.1 and stable environment shown in Note (5).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Color

Green

Chromaticity

(CIE 1931)

Blue

White

Center Luminance of White

(Center of Screen)

Contrast Ratio CR

Rx

Ry

Gx Gy Bx

By

Wx

Wy

L

C

θ

=0°,

θ

x

CS-1000T

=0°

Y

Typ -

0.05

0.263 0.313

0.279 0.329

200 250 - cd/m2(4), (5)

350 500 - - (2), (5)

0.624

0.346

0.335

0.604

0.160

0.071

Typ +

0.05

- (1), (5)

0.363

0.379

TR - 2 4

Response Time

White Variation

Viewing Angle

Horizontal

Vertical

Horizontal

Vertical

TF - 6 12

T

GtG_AVE_

δ

W

θ

+

x

θ

-

x

θ

+

Y

θ

-

Y

θ

+

x

θ

-

x

θ

+

Y

θ

-

Y

θ

x

θ

x

=0°,

CR

Њ

θ

Y

θ

Y

10

=0°

5

- -

---

80 80 75

75

--- 1.33

89 89 85 85

75 85 75 85 70 80 70 80 -

ms (3), (7)

Deg. (1), (5)

-

Deg. (1), (5)

- (5), (6)

16 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

Note (1) Definition of Viewing Angle (θx, θy):

θ

X-

= 90º

x-

6 o’clock

θ

y-

= 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Normal

θ

x = θy = 0º

θy- θy+

θx−

θx+

y+

12 o’clock direction

θ

y+

= 90º

x+

θ

X+

= 90º

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (1)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

Gray Level

10%

0%

255

R

T

R

, TF):

Gray Level 0

Gray Level

T

F

255

Time

66.67ms

66.67m

17 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 255 at center point

LC = L (1)

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 40 minutes in a windless room.

LCD Module

LCD Panel

USB2000

Center of the Screen

CS-1000T

Field of View = 2º

Light Shield Room

(Ambient Luminance < 2 lux)

Note (6) Definition of White Variation (

Measure the luminance of gray level 255 at 9 points

δ

W = Maximum [L (1), L (2) ……L (4), L (9)] / Minimum [L (1), L (2) …… L (4), L (9)]

δ

W):

18 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 12 LCD modules / 1 Box

(2) Box dimensions: 490(L) X 325(W) X 320(H) mm

(3) Weight: approximately 15.7Kg (12 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Corner, 3 Edge, 6 Face, ISTA STANDARD Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

Non Operation

Figure. 8-1 Packing method

19 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

www.panelook.com

oc. No.:

Issued Date: Mar. 05, 2009

Model No.: M156B3-L02

Approval

For ocean shipping

Sea / Land Transportation (40ft Container)

Corner Protector (50*50*1130mm)

PE Sheet

Film

PE Sheet

Film

For air transport

PP Belt

Carton labe l

Corner Protector (50*50*800mm)

Pallet (1150* 1150*143mm )

Figure. 8-2 Packing method

Figure. 8-3 Packing method

20 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

(a) Model Name: M156B3-L02

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) CMO barcode definition:

Serial ID: XX

Code Meaning Description

XX CMO internal use XX Revision Cover all the change

X CMO internal use -

YMD

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

15B31 Model number M156B3-L02=15B32

X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 1,2,~,9,A,B,~,Y,Z

XX Module location Tainan, Taiwan=TN ; Ningbo China=NP

L Module line # 1,2,~,9,A,B,~,Y,Z

YMD

NNNN Serial number Manufacturing sequence of product

(e) FAB ID(UL Factory ID):

-XX-X-XX-YMD-L-NNNN

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

-15B32-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

Region Factory ID

TWCMO GEMN

NBCMO LEOO

NBCME CANO

NHCMO CAPG

21 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

D

Issued Date: Mar. 05, 2009

www.panelook.com

oc. No.:

Model No.: M156B3-L02

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(10) When ambient temperature is lower than 10ºC may reduce the display quality.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

(1) UL60950-1 or updated standard.

(2) IEC60950-1 or updated standard.

10.4 OTHER

When fixed patterns are displayed for a long time, remnant image is likely to occur.

22 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

CMO M156B3-L02 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual