One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: Mar. 25, 2009
www.panelook.com
Doc. No.: 400028697
Model No.: M156B3-L01
Approval
Date Section Description
Ver. 2.0 Mar. 25, 09 -M156B3-L01 Approval Specifications was first issued.
3 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: Mar. 25, 2009
www.panelook.com
Doc. No.: 400028697
Model No.: M156B3-L01
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M156B3-L01 is a 15.6” wide TFT Liquid Crystal Display module with white LED Backlight unit and 30 pins
1ch-LVDS interface. This module supports 1366 x 768 WXGA mode and can display 16.7M colors. The
converter module for Backlight is not built in.
1.2 FEATURES
- Contrast ratio 500:1
- Response time 8ms.
- WXGA (1366 x 768 pixels) resolution.
- DE (Data Enable) only mode.
- LVDS (Low Voltage Differential Signaling) interface.
- RoHS compliance.
- White LED Backlight Unit
- Low power consumption
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 344.232(H) × 193.536(V) (15.6” diagonal) mm
Bezel Opening Area 347.5(H)x196.8(V) mm
Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.252 (H) x 0.252 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7Mcolor Color saturation 62 %NTSC (typ.) - Surface Treatment AG type, 3H hard coating, Haze 25 - Module Power Consumption 7.94Watt (2)
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 363.3 363.8 364.3 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Please refer to the section 3.1 & 3.2 & 3.3 for more information of power consumption.
Vertical(V) 215.4 215.9 216.4 mm
Depth(D) 10.4 10.9 11.6 mm
Weight - 1081 g -
4 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(1)
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
A
Issued Date: Mar. 25, 2009
www.panelook.com
Doc. No.: 400028697
Model No.: M156B3-L01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ู 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.
- 50 G (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Min. Max.
Value
Unit Note
Note (3) 50G,11ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
t Room Temperature
Side Mount Fixing Screw
Gap=3~5mm
Bracket
LCD Module
Side Mount Fixing Screw
Stage
5 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
Issued Date: Mar. 25, 2009
www.panelook.com
Doc. No.: 400028697
Model No.: M156B3-L01
Approval
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V (1)
Logic Input Voltage Vlogic -0.3 +2.8 V
Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum
values.
Min. Max.
Value
Unit Note
6 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Doc. No.: 400028697
Issued Date: Mar. 25, 2009
Model No.: M156B3-L01
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I
White - 0.310.37A(3)a
Power Supply Current
Black - 0.380.46A(3)b
Vertical Stripe
Power Consumption P
RUSH
-
-
-
LCD
- 0.84 2 A (2)
- 0.41 0.5 A (3)c
- 2.05 2.5 watt (4)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic - 0.8 - V
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
Value
Unit Note
(High to Low)
(Control Signal)
SW
+12V
+5.0V
R1
47K
R2
1K
47K
VR1
C1
1uF
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
Vcc
(LCD Module Input)
Vcc rising time is 470μs
Vcc
0.9Vcc
0.1Vcc
GND
470μs
7 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Global LCD Panel Exchange Center
≤≤≤
Issued Date: Mar. 25, 2009
www.panelook.com
Doc. No.: 400028697
Model No.: M156B3-L01
Approval
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
Note(4) The power consumption is specified at the pattern with the maximum current.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
RR
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
Active Area
3.2 Vcc Power Dip Condition:
Dip condition:
Vcc
4.5V
4.0V
Td
msTdVVccV20,5.40.4
8 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.0
www.panelook.com
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.