CMO M150X2-T05 Specification

Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
9. PACKAGING ------------------------------------------------------- 21
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
10. INCOMING INSPECITION DAY ------------------------------------------------------- 23
11. DEFINITION OF LABELS ------------------------------------------------------- 24
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 10
------------------------------------------------------- 11
------------------------------------------------------- 14
------------------------------------------------------- 17
------------------------------------------------------- 20
2 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
Version Date
Aug.28’2001
Aug.28’2001
Dec.20’2001
Jun.21’2001
Ver 3.0
Ver3.1
Ver3.1
Ver3.2
Page
(New)
All
7
10
15
17
REVISION HISTORY
Section Description
Issue Approval Specification for Mitac Technology Co.
All
Update Power Supply Current White 800(Max.)à--(Max.)
3.1
Update Power Supply Current Black 470(Max.)à--(Max.)
Update Power Supply Current Vertical Stripe 570(Max.)à--(Max.)
Delete 1 HV (Blue).
4.2
Delete 2 HV (Black).
Delete 1 HV (Pink).
Delete 2 HV (White).
Delete 1 HV (Blue).
Delete 2 HV (Black).
Delete 1 HV (Pink).
Delete 2 HV (White).
Update Valid display data (1024 Tck)à(512 Tck).
Add DCLK 0.7 V
7.2
Update Contrast Ration
300(Min.) , 400(Typ.) à 350(Min.) , 500(Typ.)
Update Color Chromaticity
Rx: (Min.)/0.613(Typ.)/(Max.) à 0.616(Min.)/0.646(Typ.)/0.676(Max.)
Ry: (Min.)/0.345(Typ.)/(Max.) à 0.325(Min.)/0.355(Typ.)/0.385(Max.)
Gx: (Min.)/0.301(Typ.)/(Max.) à 0.253(Min.)/0.283(Typ.)/0.313(Max.)
Gy: (Min.)/0.563(Typ.)/(Max.) à 0.568(Min.)/0.598(Typ.)/0.628(Max.)
Add Viewing Angle
Horizontal Ϙx+ : 85 , Ϙx- : 85
Vertic al Ϙy+ : 85 , Ϙy- : 85
DD
3 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M150X2-T05 is a 15.0” TFT Liquid Crystal Display module with 4 CCFL Backlight units and 60 pins TTL
interface. This module supports 1024 x 768 XGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
1.2 FEATURES
- Wide viewing angle
- XGA (1024 x 768 pixels) resolution
- DE (Data Enable) only mode
www.panelook.com
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
-High contrast 400:1 Min
-TTL Interface with 2pixels/clock
1.3 APPLICATION
- Desktop monitors
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Active Area 304.1(H) x 228.1(V) (15.0” diagonal) mm Bezel Opening Area 308.2(H) x 232.1(V) mm Driver Element a-si TFT active matrix - ­Pixel Number 1024 x R.G.B. x 768 pixel ­Pixel Pitch 0.297(H) x 0.297(W) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally black - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) - 331.6 - mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) - 254.76 - mm Depth(D) - 13.0 mm (1)(2)
Weight - - 1,350 g -
(1)
(1)
Note (2) The depth is without connector and boss.
4 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Storage Humidity HST 5 85 % ­Operation Humidity HOP 20 85 % ­Shock (Non-Operating) S Vibration (Non-Operating) V
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 85 %RH Max. (Ta £ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
www.panelook.com
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
Value
Min. Max.
- 50 G (3), (5)
NOP
- 2 G (4), (5)
NOP
Unit Note
(c) No condensation of water.
Relative Humidity (%RH)
100
85
80
60
40
20
5
Operating Range
Storage Range
8060 -20 400 20-40
Temperature (ºC)
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Note (3) 6ms, 1 time each ±X,±Y and ±Z directions
Note (4) 10 ~ 500 Hz, 1 cycle/20min. 1.5mm max, 1 hour each X, Y and Z directions
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
5 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VDD -0.3 4.0 V (1)
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL 613 750 V Lamp Current IL 2.0 7.0 mA Lamp Frequency FL 30 80 KHz
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Issued Date:Dec.20’2001
Model No.: M150X2-T05
(1), (2), IL = 6 mA
RMS
RMS
(1), (2)
Approval
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to Section 3.2 for further information).
6 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Symbol
Power Supply Voltage VDD 3.0 3.3 3.6 V ­Rush Current I
White - 750 - mA (3)a
Power Supply Current
Input Voltage
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
Black - 440 - mA (3)b Vertical Stripe “H” Level VIH 2.4 - 3.6 V ­“L” Level V
www.panelook.com
Min. Typ. Max.
- - 1.5 A (2)
RUSH
lcc
- 540 - mA (3)c
0 - 0.9 V -
IL
Value
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
Unit Note
+3.3V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
VDD
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
+3.3V
0.9VDD
0.1VDD
GND
470ϴs
7 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Global LCD Panel Exchange Center
Note (3) The specified power supply current is under the conditions at VDD =3.3V, Ta = 25 ± 2 ºC, DC
www.panelook.com
Issued Date:Dec.20’2001
Model No.: M150X2-T05
Approval
Current and f
a. White Pattern
c. Vertical Stripe Pattern
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
Active Area
B
B
Active Area
R
B
R
G
R
B
R
G
R
R R
G
G
B
B
R
G
G
G
G
B
B
B
B
R
R
Active Area
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
Lamp Input Voltage VL 613 682 750 V Lamp Current IL 2.0 6.0 7.0 mA
Lamp Turn On Voltage VS
Operating Frequency FL 30 45 80 KHz (3) Lamp Life Time LBL 40,000 50,000 - Hrs (5) Power Consumption PL - 16000 - mW (4), IL = 6 mA
Note (1) Lamp current is measured by utilizing a high frequency current meter as shown below:
Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.
LCD
Module
HV (Pink/ Blue)
LV (White/ Black)
Min. Typ. Max.
- - 850 (25
- - 1050 (0
Value
1
2
Current Meter
Unit Note
o
C) V
o
C) V
I
RMS
(1)
RMS
(2)
RMS
(2)
RMS
= 6 mA
L
Inverter
A
Otherwise the lamp may not be turned on.
8 / 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 3.2
www.panelook.com
Loading...
+ 18 hidden pages