CMO G150X1-L01 Specification

Global LCD Panel Exchange Center

www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING ------------------------------------------------------- 20

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ------------------------------------------------------- 21

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MODULE DRAWING -------------------------------------------------------- 23

------------------------------------------------------- 3

------------------------------------------------------- 5

------------------------------------------------------- 6

------------------------------------------------------- 8

------------------------------------------------------- 11

------------------------------------------------------- 12

------------------------------------------------------- 14

------------------------------------------------------- 17

------------------------------------------------------- 22

2 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Version Date

Ver 2.0

May.23,’ 06 All

Page

(New)

REVISION HISTORY

Section Description

All Approval Specification was first issued.

3 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

G150X1-L01 is a 15.0” TFT Liquid Crystal Display module with 2 CCFL Backlight units and 20 pins LVDS

interface. This module supports 1024 x 768 XGA mode and can display 16.2M colors.

The PSWG is to establish a set of displays with standard mechanical dimensions and select electrical

interface requirements for an industry standard 15.0” XGA LCD panel and the inverter module for Backlight

is not built in.

1.2 FEATURES

- XGA (1024 x 768 pixels) resolution

- DE(Data Enable) only mode

- LVDS Interface with 1pixel/clock

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

- PSWG (Panel Standardization Working Group)

- Wide operating temperature.

1.3 APPLICATION

-TFT LCD Monitor

-TFT LCD TV

- Factory Application

- Amusement

- Vehicle

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note

Active Area 304.128 (H) x 228.096(V) (15.0” diagonal) mm Bezel Opening Area 307.4(H) x 231.3(V) mm

Driver Element a-Si TFT active matrix - Pixel Number 1024 x R.G.B x 768 pixel Pixel Pitch 0.297(H) x 0.297(W) mm Pixel Arrangement RGB vertical Stripe - Display Colors 16,194,277 color Display Mode Normally White - Surface Treatment Hard Coating (3H), Anti-Glare ( Haze 25) - -

(1)

4 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 326.0 326.5 327.0 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) The depth is without connector.

Vertical(V) 253.0 253.5 254.0 mm Depth(D) - - 14.35 mm (1)(2)

Weight - - 1080 g -

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

(1)

+/- 0.5mm

5 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -40 80 ºC (1) Operating Ambient Temperature TOP -30 70 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Value

Min. Max.

- 50G G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Unit Note

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta d 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation of water.

Note (2) The temperature of panel surface should be -30ºC Min. and 70 ºC Max.

Note (3) 11ms, 1 time each rX,rY and rZ directions

Note (4) 10 ~ 500 Hz sine wave, 30 min./1 cycle , 1.5mm max, 30 min. each X, Y and Z directions

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

6 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VDD -0.3 4.0 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL 522 638 V Lamp Current IL - 8.0 mA Lamp Frequency FL 40 80 KHz

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

www.panelook.com

Value

Min. Max.

Value

Min. Max.

Unit Note

Issued Date:May.23,2006 Model No.: G150X1-L01

(1), (2), IL = 8 mA

RMS

(1), (2)

Approval

Note (2) Specified values are for lamp (Refer to Section 3.2 for further information).

7 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

3.1 TFT LCD MODULE

Parameter Symbol

(1)

Value

Min. Typ. Max.

Unit Note

Power Supply Voltage VDD 3.0 3.3 3.6 V Ripple Voltage VRP - - 100 mVp-p Rush Current I

Power Supply Current

White - 500 mA (3)a Black

- - 2.0 A (2)

RUSH

lcc

- 750 mA (3)b

“H” Level VIH - - 100 mV - Differential Input Voltage for

LVDS Receiver Threshold

“L” Level V

-100 - - mV -

IL

Terminating Resistor RT 100 - Ohm -

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+3.3V

R1

47K

Q1 2SK1475

FUSE

C3

1uF

VDD

(LCD Module Input)

(High to Low)

(Control Signal)

SW

+12V

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

+3.3V

0.9 V

DD

0.1 VDD

GND

470Ӵs

8 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Note (3) The specified power supply current is under the conditions at V

Current and f

a. White Pattern

= 60 Hz, whereas a power dissipation check pattern below is displayed.

v

Active Area

=3.3V, Ta = 25 r 2 ºC, DC

DD

b. Black Pattern

Active Area

9 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

3.2 BACKLIGHT UNIT Ta = 25 r 2 ºC

Parameter Symbol

Min. Typ. Max. Lamp Input Voltage VL 522 580 638 V Lamp Current IL -- 8 -- mA

Lamp Turn On Voltage VS

-- --

-- -Operating Frequency FL 40 -- 80 KHz (3) Lamp Life Time LBL 50000 -- -- Hrs (5) Power Consumption PL 4.18 4.64 5.1 W (4), IL = 8.0 mA

Note (1) Lamp current is measured by utilizing a high frequency current meter as shown below:

HV (Pink/ Blue)

LV (White/ Black)

LCD

Module

HV (Pink/ Blue)

LV (White/ Black)

Value

1

3

Current Meter

1

3

Current Meter

Unit Note

1400 ( 0к)

1210 (25к)

I

RMS

V

(2)

RMS

(2)

V

RMS

= 8.0 mA

L

(1)

Inverter

A

Inverter

A

Approval

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may generate interference with horizontal synchronous frequency from the

display, and this may cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronous frequency and its harmonics as far

as possible.

Note (4) P

= IL X VL

L

Note (5) The lifetime of lamp is defined as the time when it continues to operate under the conditions at Ta

= 25 r2

o

C and IL =8.0mA

until one of the following events occurs:

RMS

(a) When the brightness becomes d 50% of its original value.

(b) When the effective ignition length becomes d 80% of its original value. (Effective ignition length

is defined as an area that the brightness is less than 70% compared to the center point.)

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for

the lamp. All the parameters of an inverter should be carefully designed to avoid generating too

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrument.

10 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

)

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

(TBD)

LVDS

INPUT

INPUT CONNECTOR

LVDS

INPUT

DC

POWER

SUPPLY

www.panelook.com

TIMING

CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

GENERATOR

Issued Date:May.23,2006 Model No.: G150X1-L01

SCAN DRIVER IC

TFT LCD PANEL

(1024x3x768)

DATA DRIVER IC

Approval

LAMP CONNECTOR

4.2 BACKLIGHT UNIT

(JST BHR-03VS-1)

BACKLIGHT UNIT

1 HV (Pink 3 LV (White

1 HV (Pink

3 LV (White

11 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin No. Symbol Function Polarity Note 1 VDD Power Supply +3.3V(typical) 2 VDD Power Supply +3.3V(typical) 3 GND Ground 4 GND Ground 5 RX0- LVDS Differential Data Input Negative 6 RX0+ LVDS Differential Data Input Positive 7 GND Ground 8 RX1- LVDS Differential Data Input Negative 9 RX1+ LVDS Differential Data Input Positive 10 GND Ground 11 RX2- LVDS Differential Data Input Negative 12 RX2+ LVDS Differential Data Input Positive 13 GND Ground 14 RXCLK- LVDS Differential Data Input Negative 15 RXCLK+ LVDS Differential Data Input Positive 16 GND Ground 17 RX3- LVDS Differential Data Input Negative

18 RX3+ LVDS Differential Data Input Positive 19 GND Ground 20 NC tied to ground

(1)Connector Part No.: [Hirose] DF14H-20P-1.25H

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

(2)Matching socket Part No.: [Hirose] DF14-20S-1.25C

5.2 BACKLIGHT UNIT

Pin Symbol Description Color

1 HV High Voltage Pink/ Blue 3 LV Ground White/ Black

Note (1) Connector Part No.: BHR-03VS-1 (JST) or equivalent

Note (2) Matching Connector Part No.: TBD or equivalent

12 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input the brighter the color. The table below provides the assignment of

color versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

: Red(252) Red(252) Red(252)

Green(0)/Dark Green(1) Green(2)

:

: Green(252) Green(252) Green(252) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(252) Blue(252) Blue(252)

0 1 0 0 0 1 1 1 0 0 0

1 1 1

0 0 0

0 0 0 0 0 0

0 0 0

0

1

0

1

0

:

1

0

:

0

:

0

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

13 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note DCLK Pixel Clock 1/TC - 65 80 MHz -

Vertical Total Time TV 780 806 1200 TH -

DE

Note (1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be set

to low logic level or ground. Otherwise, this module would operate abnormally.

Vertical Address Time TVD 768 768 768 TH -

Horizontal Total Time TH 1140 1344 1600 TC -

Horizontal Address Time T

www.panelook.com

1024 1024 1024 TC -

HD

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

INPUT SIGNAL TIMING DIAGRAM

Tv

DE

TH

DCLK

DE

C

T

HD

T

DATA

14 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

C

www.panelook.com

TIMING DIAGRAM of LVDS

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

TxCLK OUT

Rx

K IN

Rx IN3

Rx IN2

Rx IN1

Rx IN0

T

T/7

RxOUT23

RxOUT17

RxOUT16 RxOUT11 RxOUT10

RESERVED B07 B06 G07 G06 R07 R06

RxOUT26

RxOUT25 RxOUT24 RxOUT22

RxOUT21

DE GND GND B05 B04 B03 B02

RxOUT18

RxOUT15 RxOUT14 RxOUT13

RxOUT12

B01 B00 G05 G04 G03 G02 G01

RxOUT7 RxOUT6

RxOUT4

RxOUT3 RxOUT2

G00 R05 R04 R03 R02 R01 R00

RxOUT5

RxOUT20

RxOUT9

RxOUT1

RxOUT27

RxOUT19

RxOUT8

RxOUT0

15 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

Power On

90%

www.panelook.com

Power Off

90%

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Restart

t4

Power Supply

for LCD, V

- Interface Signal

(LVDS Signal of Transmitter), V

- Power for Lamp

Timing Specifications:

0.5 < t1 Љ 10 msec

0 < t2 Љ 50 msec

0 < t3 Љ 50 msec

0V

DD

0V

I

t4 Њ 500 msec

t5 Њ 200 msec

10%

t1

Valid Data

t6 t5

ONOFF OFF

10%

t3 t2

10%

t6 Њ 200 msec

Note (1) Please avoid floating state of interface signal at invalid period.

Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD V

to 0 V.

DD

Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the

interface signal is valid. The Backlight inverter power must be turned off before the power supply

for the logic and the interface signal is invalid.

16 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VDD 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 8.0 mA

The measurement methods of optical characteristics are shown in Section 7.2. The following items

should be measured under the test conditions described in Section 7.1 and stable environment shown in

Note (4).

7.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 480

Response Time

Luminance of White (Center point) White Variation

Red

Color Chromaticity

Viewing Angle

Green

Blue

White

Horizontal

Vertical

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

o

25r2

50r10

700

TR -

-

T

F

8

17

- (2), (4) 13 ms 22 ms

L 400 450 - cd/m

GW

Rx 0.613 Ry 0.344 Gx

=0q, TY =0q

T

x

Viewing Normal Angle

Gy Bx

By Wx Wy

Tx+

T

-

x

TY+

T

Y

-

CRt10

- 1.25 1.4 - (4),(5)

0.302

Typ -

0.03

0.567

0.144

Typ+

0.03

0.102

0.313

0.329

- 70 80 70 80 70 80 70 80 -

C

%RH

-

Deg.

2

(3)

(4),(5)

(1), (4)

17 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Definition of Viewing Angle (Tx, Ty):

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

TX- = 90º

x-

6 o’clock

T

y- = 90º

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

Normal

Tx = Ty = 0º

Ty- Ty

Tx-

Tx

y+

12 o’clock direction

T

y+ = 90º

x+

TX+ = 90º

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (1)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5).

Note (3) Definition of Response Time (T

100%

90%

Gray Level 255

Optical

Response

10%

0%

T

R

, TF):

R

Gray Level 0

Gray Level 255

Time

T

F

66.67ms

66.67m

18 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Note (4) Measurement Setup:

The LCD module should be stabilized at given temperature for 15 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room

LCD Module

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

LCD Panel

Center of the Screen

Field of View = 2º

500 mm

Note (5) Definition of luminance measured points:

Measure the luminance of gray level 255 at point L(1)

Definition of White Variation (GW):

Measure the luminance of gray level 255 at 9 points

Maximum [L (1), L (6), L (7), L (8), L (9), L (10), L (11), L (12), L (13)]

GW =

Minimum [L (1), L (6), L (7), L (8), L (9), L (10), L (11), L (12), L (13)]

Photometer

(BM5A,CS-1000T)

Light Shield Room

(Ambient Luminance < 2 lux)

D/10

Horizontal Line

D

D/4 D/2 3D/4

9D/10

W/10

W/4

6

23

7

8

X

W

W/2

9

1

10

Vertical Line

3W/4

9W/10

4

11 12 13

5

: Test Point

X=1 to 13

Active Area

19 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

8. PRECAUTIONS

8.1 HANDLING PRECAUTIONS

(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not

to twist or bend the module.

(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause

electrical short or damage the polarizer.

(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and

assembly process.

(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is

very soft and easily scratched.

(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use

Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

permanently damage the polarizer due to chemical reaction.

(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for

a long time.

(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.

(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.

(9) Do not disassemble the module.

(10) Do not pull or fold the lamp wire.

(11) Pins of I/F connector should not be touched directly with bare hands.

8.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may

damage LCD module when it is operating.

(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the

response time will become slowly, and the starting voltage of lamp will be higher than the room

temperature.

8.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the module is operating.

(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This

can prevent the CMOS LSI chips from damage during latch-up.

The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while assembling with

inverter. Do not disassemble the module or insert anything into the Backlight unit.

20 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

9. PACKAGING

9.1 PACKING SPECIFICATIONS

(1) 10 LCD modules / 1 Box

(2) Box dimensions : 511(L) X 420(W) X 360(H) mm

(3) Weight : approximately 12.7Kg ( 10 modules per box)

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Figures 8-1

21 / 24

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

9.2 PACKING Method

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

Figures 8-2

22 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following

explanation.

www.panelook.com

Issued Date:May.23,2006 Model No.: G150X1-L01

Approval

G150X1 -L01 Rev. XX

CHI MEI

OPTOELECTRONICS

X X X X X X X Y M D L N N N N

E207943

MADE IN TAIWAN

(a) Model Name: G150X1 –L01

(b) Revision: Rev. XX, for example: C1, C2 …etc.

(c) Serial ID: X X

X X X X X Y M D L N N N N

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Color Filter

Revision

Serial ID includes the information as below:

(a) Manufactured Date: Year: 1~9, for 2000~2009

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: cover all the change

(c) Color Filter: 0 ->CMO, 2 -> Toppan

(d) Serial No.: Manufacturing sequence of product

(e) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

CMO Internal Use

st

to 31st, exclude I and O

23 / 24

Version 2.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

CMO G150X1-L01 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual