Please check all the items in your WIDI-X8 package:
z The WIDI-X8 product 2 pcs
z USB cable 1 pcs
z MIDI cable 2 pcs
z User’s manual 1 pcs
2
Special Message Section
This product utilizes batteries or an external
power supply (adapter). Do NOT connect this
product to any power supply or adapter other
than the one described in the manual, on the
product, or specifically recommended by CME.
user safe and environment friendly. We sincerely
believe that our products and the production
methods used to produce them, meet these goals.
In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
WARNING: Do not place this product in a
position where anyone could walk on, trip over, or
roll anything over the power or the connecting
cords of any kind. The use of an extension cord is
not recommended! If you must use an extension
cord, make sure that the cord has the ability to
handle the maximum current needed by this
product. Please consult a local electrician when
possible.
This product should be used only with the
components supplied or recommended by CME.
When used with any components, please observe
all safety markings and instructions that
accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is
believed to be correct at the time of printing.
However, CME reserves the right to change or
modify any of the specifications, without notice or
obligation to update existing units.
This product, either alone or in combination with
an amplifier and headphones or speaker(s), may
be capable of producing sound levels that could
cause permanent hearing loss. Do NOT operate
for long periods of time at a high volume level or
at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should
consult an audiologist.
IMPORTANT: The louder the sound, the shorter
the time period before damage occurs.
Some CME products may have stands and/or
accessory mounting fixtures that are either
supplied with the product or as optional
accessories. Some of these items are designed
to be dealer assembled or installed. Please make
sure that stands are stable and any optional
fixtures (where applicable) are well secured
BEFORE using.
Battery Notice:
This product MAY contain a small
non-rechargeable battery which (if applicable) is
soldered in place. The average life span of this
type of battery is approximately five years.
When replacement becomes necessary, contact
a qualified service representative to perform the
replacement.
This product may also use “household” type
batteries. Some of these may be rechargeable.
Make sure that the battery being charged is a
rechargeable type and that the charger is
intended for the battery being charged.
When installing batteries, do not mix batteries
with new ones, or with batteries of different types.
Batteries MUST be installed correctly.
Mismatches of incorrect installation may result in
overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any
battery. Keep all batteries away from children.
Dispose the used batteries promptly and as
regulated by the laws in your area. Note: Check
with any retailer of household type batteries, in
your area, for battery disposal information.
Disposal Notice:
Should this product become damaged beyond
repair, or for some reason its useful life is
considered to be at an end, please observe all
local, state, and federal regulations that relate to
the disposal of products that contain lead,
batteries, plastics, etc. If your dealer is unable to
assist you, please contact CME directly.
Stands supplied by CME are designed for the
respective products only. No other uses are
recommended.
NOTICE:
Service charges, incurred due to a lack of
knowledge relating to how a function or effect
works (when the unit is operating as designed),
are not covered by the manufacturer’s warranty,
and are therefore the owners responsibility.
Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
CME strives to produce products that are both
3
FCC INFORMATION (U.S.A)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual,
meets FCC requirements. Modifications not expressly approved by CME may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another products
use only high quality shielded cables. Cable(s) supplied with this product MUST be
used. Follow all installation instructions. Failure to follow instructions could void your
FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the limits for a Class B
Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interferences in a residential
environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used according to the instructions found in the users manual,
may cause interferences, harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that interferences will not occur
in all installations. If this product is found to be the source of interferences, which can
be determined by turning the unit “OFF” and “ON”, please try to eliminate the problems
by using one of the following measures:
Relocate either this product or the device that is being affected by the interferences.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or
install AC line filter(s).
In the case of radio or TV interferences, relocate/reorient the antenna. If the antenna
lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfying results, please contact the local
retailer, authorized to distribute this type of product. If you cannot locate the appropriate
retailer, please contact CME.
The above statements apply ONLY to those products distributed in the USA.
PRECAUTIONS
IMPORTANT
Always follow the basic precautions listed below to avoid the possibility of serious injury or
even death from electrical shock, damages, fire or other hazards. These precautions
include, but are not limited to, the follows:
1. Read and understand all the instructions.
2. Always follow the instructions on the instrument.
3. Before cleaning the instrument, always remove the electric plug from the outlet as well
as the USB cable. When cleaning, use a soft and dry cloth. Do not use gasoline,
alcohol, acetone, turps or any other organic solutions; do not use liquid cleaner, spray
cleaner or too wet cloth.
4. Do not use the instrument near water or moisture, such as bathtub, washbasin,
washing poor in the kitchen or similar places.
5. Do not place the instrument in an unstable position where it might accidentally fall over.
6. Do not jam sinks or holes of the instrument; those sinks of holes are used for air
circulation to prevent the instrument from overheating. Do not place the instrument
near heat sink or any places with poor air circulation.
7. Do not place anything on the power cord. Make sure the power cord is set on a safe
place, so nobody will step on it and no body will trip over it.
8. Do not overload the outlet and the AC cable to avoid fire or electrical shock.
9. Do not insert anything in the instrument, which may cause fire or electrical shock. Do
not splash any kind of liquid to the instrument.
10. Do not disassemble the instrument in case of accidental electrical shock.
11. Always take the instrument to a qualified service center in need of repair. You will cause
yourself in danger if you open or remove the cover, and improper assembly may cause
electrical shock in the future use.
12. Unplug all the connectors and take the instrument to a qualified service center if
anything in the below listed happens:
(1) The power cord or connector get hurt or worn out.
(2) Any liquid get in the instrument.
(3) The instrument gets rain or water splash.
(4) The instrument dose not work properly after following all the instructions
regarding to the trouble shootings.
(5) The instrument falls down or gets broken.
(6) The instrument functions poorly.
13. Do not use the instrument when thundering; otherwise the thundering may cause
long-distance electrical shock.
14. Do not use the instrument when there is a gas leak nearby.
15. Switch off your WIDI-X8 when inside or near aircraft. The use of RF product in aircraft
is illegal. It may be dangerous to the operation of the aircraft
16. Do not use your WIDI-X8 on the ground without the permission of the ground crew in
the airport.
5
17. Observe ‘Turn off the RF communication device such as Mobile Phone’ signs, such as
those near stores of fuel, chemicals or explosives
18. The operation of some medical electronic devices, such as hearing aids and
pacemakers, may be affected if a WIDI-X8 is used next to them. Observe any warning
signs and manufacturer's recommendations.
19. Please do not use your WIDI-X8 near any precision instrument, which may cause
noise or abnormal operation to the instrument.
20. Switch off your WIDI-X8 at a refueling point, such as a petrol station, even if you are
not refueling your own car.
21. Do not store or carry flammable or explosive materials in the same compartment
where a radio transmitter, such as a WIDI-X8, is placed.
22. Electronic vehicle systems, such as anti-lock brakes, speed control and fuel injection
systems are not normally affected by radio transmissions. The manufacturer of such
equipment can advise if it is adequately shielded from radio transmissions. If you
suspect vehicle problems caused by radio transmissions, consult your dealer and do
not switch on your WIDI-X8 until it has been checked by qualified approved installers.
Efficient Use
For optimum performance with minimum power consumption, note the following:
Your WIDI-X8 has the internal antenna. Do not cover part of the internal antenna
of the WIDI-X8 with your hands. This affects communication quality, may cause
the WIDI-X8 to operate at a higher power level than needed and may shorten
communication and standby times.
Radio Frequency Energy
Your WIDI-X8 is a low-power radio transmitter and receiver. When it is turned on, it
intermittently receives and transmits radio frequency (RF) energy (radio waves).
The system that handles the communication controls the power level at which the
WIDI-X8 transmits.
Exposure to Radio Frequency Energy
Your WIDI-X8 is designed not to exceed the limits for exposure to RF energy set
by national authorities and international health agencies. * These limits are part of
comprehensive guidelines and establish permitted levels of radio wave exposure
for the general population. The guidelines were developed by independent
scientific organizations such as ICNIRP (International Commission on
Non-Ionizing Radiation Protection) through periodic and thorough evaluation of
scientific studies. The limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health, and to account for
any variations in measurements.*Examples of radio frequency exposure
guidelines and standards that your WIDI-X8 is designed to conform to:
ICNIRP, “Guidelines for limiting exposure to time-varying electric, magnetic,
and electromagnetic fields (up to 300 G Hz)-International Commission on
Non-Ionizing Radiation Protection (ICNIRP)”. Health Physics, vol. 74. pp,
494-522, April 1998.
99/519/EC Council Recommendation on the limitation of exposure to the
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.