C-Media cm8828 User Manual

PCI Express 7.1 Channel

Sound Card

User Manual

Ver. 1.00

All brand names and trademarks are properties of their

respective owners.

Features

 Compatible with PCI Express 1.1 interface with bus mastering

and burst modes

 Audio format supports 192K/176.4K/96K/88.2K/48K/44.1K

and 16/24bits resolution

 Integrated 192K/176.4K/96K/88.2K/48K/44.1K, and

16/24-bit SPDIF transmitter/Receiver

System Requirements

 PCI Express-enabled system with an available PCI Express slot

 Windows® XP/Vista/7/8 (32/64 bit)

 DirectX 8.1 above is required

Package Contents

 1 x PCI Express 7.1 Channel Sound Card

 1 x Driver CD

 1 x User Manual

 1 x Mini-DIN to 3.5mm fan-out cable

Note: Contents may vary depending on the market/country.

MN4000000073 Page 2

Hardware Installation

1. Turn off the computer, Unplug the power cord.

2. Open the computer case. Check with your computer

manufacturer if you need additional instructions. Remove any old

third-party sound cards or the metal PCIe slot bracket.

3. Insert the sound card into a blank PCIe slot. Make sure that all of

its pins are touching the PCIe slot’s contacts.

4. Check the sound card is inserted into the PCIe slot firmly, and

secure it with a screw.

5. Close the case. Plug in the power cord and other cables.

6. Connect the Mini-DIN to 3.5mm fan-out cable bundled in this

package and use for 8-channel line output jack.

Driver Installation

For Windows® XP/Vista/7/8 (32/64 bit)

1. Insert the provided CD into your disk drive. The CD-ROM will

start automatically. The following screen will show up and please

click “Install Driver”.

MN4000000073 Page 3