CM VS0500A2, VS0300A3, VS0300A4, VS0550A4, VS0550A1 User Manual

variable speed electric chain hoist

CM ShopStar VS shown with optional
lug mount suspension and Universal Trolley

COLUMBUS McKINNON CORPORATION

ELECTRIC CHAIN HOIST

variable speed electric chain hoist

The CM® ShopStar VS ™ variable speed electric chain hoist is built
for rugged industrial and commercial applications where precision
load control is critical. This durable hoist features a high H4-plus duty
cycle and a compact design ideal for use at workstations and production
lines. The ShopStar VS is a superior alternative to air hoists.

CAPACITIES: 250 To 1,100 LB.

BENEFITS & FEATURES

RUGGED & DURABLE

Thermally protected hoist motor. Rugged, cast
aluminum alloy hoist frame and body feature durable
epoxy powder-coat finish to protect against corrosion.

LOW MAINTENANCE

Gear train lifetime lubricated with non-oxidizing
grease. Totally enclosed hoist frame protects motor
from environmental contamination.

COMPACT DESIGN

Small, compact design makes hoist ideal for use
in tight spaces and allows for easy installation and
maintenance.

OVERLOAD PROTECTION

Standard overload device protects the hoist, operator
and surrounding structure from damaging overloads.

LONG CHAIN LIFE

Durable CM Hoistaloy
oblique-lay lift wheel for longer chain life.

®

Load Chain. 10-pocket,

STANDARD LIFT: 10 FEET
SPEEDS: UP To 63 FT./mIN.

SINGLE- & 3-PHASE VOLTAGE OPTIONS

100 to 240 volt single phase, 50 to 60 Hz.
208 to 240 volt 3 phase.
460 volt and 575 volt 3 phase with optional transformer.
6-1/2 ft. power cord with removable molded,
3-prong, 115-volt plug.

H4-PLUS DUTY CYCLE

With 300+ motor starts per hour and Class F
motor insulation, the ShopStar VS outperforms
the H3 rating of its major competitors.

5:1 DESIGN FACTOR

NEMA 4 INDUSTRIAL-RATED
CONTROL SYSTEM

STANDARD RIGID-HOOK SUSPENSION

oPTIoNAL FEATURES

CM® ROCKET™ PENDANT

Engineered for maximum operator comfort
and safety, the CM Rocket delivers precision
load control with a unique rocker switch
and comfort-fit design. Not available for
3-step infinitely variable hoist models.
Pendant with emergency stop not available
on ShopStar VS.

VARIABLE CONTROLS

Choose from 2-speed, 2-step infinitely variable,
3-speed and 3-step infinitely variable controls
for single and 3-phase applications.

DURABLE CHAIN CONTAINERS

Impact-resistant plastic/mesh
or metal chain containers.

SWIVEL HOOK SUSPENSION

Available with latch and Latchlok®
latch, swivel hook suspension
rotates 360˚ for easy installation
and positioning. Lug mount
suspension is also available.

CM ShopStar VS shown
with optional chain container.

Cm SHoPSTAR VS

SPECIFICATIoNS & DImENSIoNS

61

2

3"

"

B C

9

16

7

6

"

32

1

A

"

11

16

1

1

"

64

25

"

32

5

7

"

8

9

"

16

13

4

"

64

6' NTS

19

"

9

32

POWER CORD

25
32

"

64

1

"

1

64

29

"

3

D

64

"

7

"

6

16

19

2

"

32

Dimensions

in. (mm)

Maximum
LIft Speed

A B C D

(ft./min.)

11.06 3 2.95 3.45 63 10 1 26

11.06 3 2.95 3.45 63 10 1 26

11.06 3 2.95 3.45 39 10 1 26

11.06 3 2.95 3.45 26 10 1 26

11.94 3.58 2.36 2.87 31 10 2 28

11.94 3.58 2.36 2.87 19 10 2 28

11.94 3.58 2.36 2.87 13 10 2 28

Capacity

(lb.)

250

300

500

550

600

1000

1100

Product Code

2-Speed

2-Step

Infinity Variable

Speed

3-Speed

3-Step

Infinity Variable

Speed

VS0250A1 VS0250A2 VS0250A3 VS0250A4

VS0300A1 VS0300A2 VS0300A3 VS0300A4

VS0500A1 VS0500A2 VS0500A3 VS0500A4

VS0550A1 VS0550A2 VS0550A3 VS0550A4

VS0600A1 VS0600A2 VS0600A3 VS0600A4

VS1000A1 VS1000A2 VS1000A3 VS1000A4

VS1100A1 VS1100A2 VS1100A3 VS1100A4

NOTE: Configurable codes and options available in addition to standard products shown above. Optional transformer required for 460-volt applications.

THE IDEAL

WoRKSTATIoN HoIST.

The CM ShopStar VS is ideal for applications in the automotive, heavy OEM,
utility and energy industries. Choose this reliable hoist for light assembly workstations
that require high speed and precision control lifting with light rail or trolley systems.

Standard

Lift
(ft.)

Reeving

Weight

(lb.)

In addition, the ShopStar VS is perfect for maintenance and repair applications
demanding accurate load control or long lifts.

Compatible with Windows XP SP3,
Windows Vista and Windows 7, 8 and 10.

ADJUST & moNIToR HoIST PERFoRmANCE

WITH EASY-To-USE INTERFACE

Whether you need to adjust your hoist operating speeds or check motor run time and over-current
events, the ShopStar VS puts the information you need at your fingertips. With convenient USB
connectivity, the operator can simply plug the hoist into a computer or tablet to change or access
performance information. The interface is designed for ease of use, allowing you to choose the control
method of the hoist as well as the maximum, minimum and, if applicable, medium speed of the hoist.
The ShopStar VS interface also provides:

 Built-in error prevention that ensures the

hoist is programmed correctly, rejecting
incorrect parameters and prompting
the operator to make corrections before
programming is complete.

 Acceleration and deceleration rates

automatically calculated based on control
methods and speed selections.

 Comprehensive hoist status information,

including start/stop cycles, motor run
time, over temp and over current events,
as well as temperatures. Hoist fault
information is also available.

SHoPSTAR FAmILY

SPECIFICATIoNS AT A GLANCE

THE CM SHOPSTAR VS BRINGS THE SPEED

The CM ShopStar electric chain hoist product line is known for its compact design and quiet operation.
The ShopStar VS rounds out this popular portfolio with high-speed operation.

SHoPSTAR SHoPSTAR VS

Capacities Speed (FPM) Reeving Min - Max Speeds (FPM)* Reeving

250 lb.

300 lb.

500 lb.

550 lb.

600 lb.

1000 lb.

1100 lb.

16, 24, 40 1 3 to 63 1

16, 24, 40 1 3 to 63 1

8, 12, 16, 20, 24 1 & 2 2 to 39 1

—— — 1 to 26 1

8, 12, 20 2 2 to 31 2

6, 8, 12 2 1 to 20 2

N/A — 1 to 13 2

Totally Enclosed Non-Vented Motor

Load Chain

Chain Container

Powder Coat Paint

Available Voltages

Variable Frequency Drive Versions

Two-Speed Version

®

CM

Rocket™ Pendant

Certification

Motor Brake

Motor Insulation

Mechanical Load Brake

Upper Suspension

Suspension Option

Overload Clutch

Metric Rated

Warranty

Country of Origin

*Configurable codes and options available in addition to standard products.

Standard Unplated / Optional Plated Standard Unplated / Optional Plated

115 to 230 Volt Single Phase.

Standard Standard

Optional Optional

Standard Standard

100 to 240 Volt Single Phase.

208 to 575 Volt 3 Phase.

N/A Standard

N/A Standard

Engineered Special

CUL CUL

DC DC

Class B Class F

N/A N/A

Rigid Hook Standard Rigid Hook Standard

Hook and Lug Hook and Lug

Standard Standard

Standard Standard

Lifetime Lifetime

USA USA

460 Volt and 575 Volt 3 Phase with Optional Transformer.

208 to 240 Volt 3 Phase.

(Not available for 3-step infinitely variable models.)

Standard Option

mAXImUm CoNTRoL.

mINImAL EFFoRT.

The CM® Rocket™ pendant is available as a standard option on the CM ShopStar VS.
At the heart of the CM Rocket is a unique rocker switch that is ergonomically
designed to reduce thumb strain and fatigue. The rocker switch gives the operator
ultimate load control for micro-positioning applications, as well as increased safety
and efficiency for hoist operators. Its curved, well-balanced shape and ribbed grip
help ensure the operator maintains a secure and comfortable hold.

THE SHoPSTAR VS:

A SUPERIoR ALTERNATIVE
To AIR HoISTS

More Responsive Controls

The ShopStar VS reacts quicker than an air hoist that has lag time
due to long control lines and circuit pressurization.

Lower Operating Costs

MORE EFFICIENT POWER CONSUMPTION

The ShopStar VS electric chain hoist does not require inefficient and costly
electric or diesel-powered air compressors.

LESS DOWNTIME

Electric hoists are easier and less expensive to maintain compared to air hoists that
require regular oil changes; maintenance to the filter, regulator and lubricators (FRLs);
and replacement of the vane, seal and gasket.

LOWER INSTALLATION COSTS

The ShopStar VS is up to 30% lighter than air hoists, installs in minutes with simple
electric setup and does not require an air source, exhaust system, or additional startup
and maintenance costs for an in-line lubricator or filter.

Cleaner Operation

Unlike electric hoists, air compression systems require oil-lubricated air that is expelled
into the environment with hoist’s exhaust air.

Quieter Operation

Electric hoists are considerably quieter compared to air hoists.

“ We converted to the ShopStar because of

its speed, dependability and braking system.
It made our process much more efficient
by switching over.”

– Greg Zippadelli, Competition Director, Stewart-Haas Racing

THE PoWER oF INTELLIGENT LIFTING

Since 1875, Columbus McKinnon has helped to make material handling
easier and safer, and, today, is your single source for complete floor-to­ceiling lifting systems.

From below-the-hook attachments, chain, rigging products, manual
and powered chain hoists to electric wire rope hoists, cranes, enclosed
track systems and specially engineered products, Columbus McKinnon
has the engineering expertise to meet the most demanding applications.

KNoW HoW. KNoW WHY.

Columbus McKinnon is committed to providing expert safety training on the proper use and inspection
of rigging and overhead lifting equipment. Our company offers comprehensive programs at our national
training centers as well as on-site at your facility. Courses include:

 Hoist Maintenance  Crane & Hoist Inspection  Crane Operator Training
 Safe Hoisting  Load Securement  Rigging
 Rigging Gear Inspection

Win in the marketplace with CMCO University.
is designed to give Channel Partners intimate product and application knowledge
that they can use to advise their end-user customers during the product selection
and sales processes.

Columbus McKinnon’s corporate headquarters in Getzville, New York, is home to our state-of-the-art

Niagara Training Center. The 3,000-square-foot facility is dedicated to training Channel Partners

and end users on the safe and proper use of hoist and rigging products. The Center offers a one-of-a-kind
training experience on chain and rigging equipment with more than 75 manual and powered hoists,
enclosed track systems and our 50-foot-wide crane system with 3-ton Yale Global King wire rope hoist.

USA 800.888.0985

•

716.689.5400 • fax: [phone]

™

This three-day program

www.cmworks.com

© 2017 Columbus McKinnon Corporation. All Rights Reserved.

Stock # B-CM-SSVS
1000 EP 1217