Page 1
Page 2
Budgit Electric Hoist
Since 1935, Budgit®has led the industry in innovation, quality, and dependability. Our compact,
lightweight, economical hoists are built to withstand the rigors of heavy service and repeated lifting
cycles. Budgit hoists are easy to service, require minimal maintenance, and offer excellent headroom.
Budgit Hoists are designed for H4 duty (300 starts/hour, 30 minutes/hour on time), which meets most
heavy-duty industrial applications. BUDGIT’s range of specifications and features have made it the perfect
solution for thousands of hoists sold in industries such as:
• Automotive Industry • Chemical Plants • Pulp and Paper
• Fabricating shops/ machine shops • Lumber Mills • Marine
• Manufactured Housing Industry • Foundries and Steel Mills • Construction
• Shipping receiving and warehousing • Textile • Plastics
Budgit also offers special hoists for specific industries
Food Handling and Pharmaceutical
Options include clean hoist (no paint) or FDA approved epoxy enamel paint, stainless steel lower block,
hooks and chain and food grade oil for gear transmission.
Corrosion Resistant / Plating Applications
Options include zinc-plated load chain and hooks, zinc-plated or anodized lower block, motor shaft seal
and sealing of electrical joints.
Explosion Proof and Spark Resistant Features
Hoist options allow for use in Class 1, Div. 2, Group C & D applications and Class 2, Div.2, Group F & G
Options include NEMA 7 panel for Class 1, Div. 1 and NEMA 4/12 panel for Class 2, Div. 2, stainless steel load
chain, hook & lower block and intrinsically safe relays.
Precision Handling
Budgit offers a wide range of hoisting speeds to suit your application. Optional 2-speed control (3:1 speed ratio)
or variable frequency control (10:1 speed ratio) will offer precision handling control of loads.
Outdoor Service
Weather resistant options such as zinc–plated load chain, water resistant covers and sealing of electrical joints
make the hoist a good choice for use in outdoor applications.
unsurpassed VALUE with a BUDGIT
Think Safety, Think Budgit
Standard safety features:
• Overload Clutch – prevents and protects operator, hoist and supporting structure from
lifting excessive loads.
• Paddle Type Upper & Lower Limit Switch – Automatically shuts down power to the hoist
preventing lower block from two-blocking into hoist frame.
• Safety Latches – Spring loaded safety latches for both upper and lower hooks.
• Designed To Meet ASME/ANSI B30.16, CSA, NEC electrical codes and is ISO 9001 certified.
2
Page 3
NEW Heavy Duty Motor Brake
AC spring set disc brake for positive braking
action and long life with minimal maintenance.
Easy 1-step adjustment procedure.
Gearing
Totally enclosed, oil-bath
lubricated for long life.
High-Torque, Heavy Duty Hoist Motor
Motors are H4 30-minute rated with class
“F” insulation and include a thermal
actuated switch –(TAS) embedded in the
motor winding for protection
Budgit Electric Hoist Cutaway
Manguard Overload Protection
The Manguard prevents lifting loads beyond the hoist’s load
range, which may damage the hoist or supporting
structure. Optional mechanical load brake is available.
Suspension
Hook suspension permits portability of the hoist while
lug suspension reduces headroom and can be used
with any of our rigid-mount trolleys. New design allows
easy change out of either hook or lug suspension.
Load Sprocket & Chain Guide
Provided with a full floating chain guide that
assures proper engagement of chain on load
sprocket.
Lower Block
Provided with a 360° rotating hook riding on
thrust bearings. As standard, the hook is
provided with a spring-loaded latch.
Push-Button Controls
Standard push-button control station is
contoured for operator comfort allowing
easy one-handed sure grip control and
provided with a weatherproof NEMA-4X
enclosure. The push-button cable is
provided with built-in strain relief to help
prevent cable damage.
Specifications
Capacity Range 1/4 thru 3 tons
Lift 10 feet standard, additional lifts available.
Lifting Speed 5 to 64 FPM
AC Power Supply 115/230 1-60 HZ; 230/460-3-60
reconnectable or 208 and 575-3-60
single voltage
Control Push-button control voltage of
115 volts standard on all models.
24-volt control optional.
Suspension Hook and Lug
Paddle Limit Switch
Paddle upper & lower control limit
switch standard on all hoists.
Hoist Controls
Single speed (standard) or optional two speed and
variable frequency for precision handling is located
under a removable cover for easy access.
Powder Coat Finish
Provides a long lasting durable finish and added
resistance to corrosive environments.
Chain Container
Included as standard for lifts up to 20’.
Die-Cast Aluminum Alloy Housing and Frame
Lightweight & rugged. Housing is precision machined
for accurate gear and bearing alignment.
All hoists are built in compliance to ASME/ANSI
B30.16 standards and NEC electrical codes.
Budgit® electric hoists and motor-driven trolleys
are CSA approved and are ISO9001 certified.
3
Page 4
A
Y
X
B
10 5/16
2 11/16
5 3/8
F
E
C
D
§
A
Y
X
B
10 5/16
2 11/16
5 3/8
E
C
D
G
Tread Line
§
Hook & Lug Mounted Hoists
A B X***
Hook Lug Hook Lug Hook Lug
tons FPM H.P. lbs in in in in in in in in in in in in
BEHC2516 16 1/4* 77
BEHC2532 32 1/2 80
BEHC2564 64 1 77
BEHC5016 16 1/2 80
BEHC5032 32 1 81
BEHC0108 8 1/2 88
BEHC0116 16 1 89
BEHC0132 32 2-1/2 95
BEHC0204 4 1/2 110
BEHC0208 8 1 111
BEHC0216 16 2-1/2 112
BEHC0305 5 1 136
BEHC0310 10 2-1/2 146
DC
6-5/16
27-1/2 27-5/815/16
1-1/85-1/8
1-1/16
Net
Weight
5-1/16
2-9/16
2-15/16
4-9/16
6-5/16
12-3/16 6-3/8
14-1/4
14-1/4
14-1/4
5
10-3/4
12-1/4
16-13/16
17-3/8
22-1/16
11-1/8 11-3/16
11-7/16 11-3/8
13-1/8
5-7/8 2 38-7/8 39-1/414-3/8 14-7/8 14-1/47-7/8 7-1/83 25-7/8 26-5/16
1
3
2
16-3/4
17-1/2
23 32-5/8
27-3/4
33-1/2
14-1/45 6-5/16
Y
27-5/827-1/2
27-7/8
9-1/2
9-1/2
9-1/21
2
GF
15/16
Lift
Speed
1
1 16-13/1616-3/4 2-9/16
E**
Max.
Capacity
Hoist
Catalog #
Parts of
Chain
Motor
1/4
1/2 11-1/8 11-3/16
• Single speed standard. Optional 2-speed or variable
frequency control available for precision load spotting.
• Heavy duty AC spring set motor brake with easy 1-step
adjustment procedure.
• Gearing totally enclosed in oil-bath lubrication for long life.
• High-torque H4 rated heavy duty motor with Class ‘F’
insulation with thermal actuated switches embedded in the
motor winding for protection from overheating
• Weatherproof NEMA-4X enclosed push-button control station
specially contoured for operator comfort allowing easy onehanded sure grip control.
• Paddle type upper & lower control limit switch.
• Powder coat finish provides long lasting durable finish and
added resistance to corrosive environments.
• Manguard overload protection prevents lifting excessive loads.
• Choice of either hook suspension permitting portability of the
hoist or lug suspension which reduces valuable headroom.
• All hoists are built in compliance to ASME/ANSI B30.16 &
CSA standards, ISO certified and NEC electrical codes.
Hook Mount
§ This dimension becomes 11-5/16” for 2-speed and 2-1/2 Hp models only
Lug Mount
Specifications & Dimensions
* Two speed hoist has a 1/2 H.P. motor
** Maximum length between one & two speed model hoists. Consult factory for exact dimensions.
*** Dimensions based on lifts thru 30 ft (1/4 - 1 Ton capacities), thru 15 ft lift (2 Ton capacity) and thru 10 ft lift (3 Ton capacity)
4
Page 5
G
F
TREAD LINE
4-7/8
K
J
B
A
1 min
E
10-5/16
2-11/16
5-3/8
L
M
(dia 4)
Wheel
X
Y
C
D
H
3
TON
DO NOT TWIST CHAIN
CAUTION
K
4-7/8
G
F
E
1 min
10-5/16
5-3/8
2-11/16
B
A
J
TREAD LINE
L
M
Y
H
X
C
D
§
§
Lug Hoists with Motor Driven Trolley
tons FPM H.P. lbs. in in in in in in in in in in in in in in
BEHC2516 16 1/4* 162
BEHC2532 32 1/2 165
BEHC2564 64 1 164
BEHC5016 16 1/2 165
BEHC5032 32 1 166
BEHC0108 8 1/2 173
BEHC0116 16 1 174
BEHC0132 32 2-1/2 182
BEHC0204 4 1/2 207
BEHC0208 8 1 209
BEHC0216 16 2-1/2 210
BEHC0305 5 1 296
BEHC0310 10 2-1/2 304
3-11/16 1-3/16
4-3/8 1-1/4
3-3/4 1-3/16
3-3/4 1-3/166-5/16
6-5/16
7-1/16
7-1/8
Net
Weight
Hoist
Catalog
Number
D J
13-1/2 7-13/1625-9/16 12-7/8 7-7/8 14-1/4 14-1/4 4-3/16 1-1/4
14-1/2 10-1/2
8-1/23 3
12-1/4 6-13/16
2 2 22-1/4 11-1/8 6-3/8 7-9/1612-1/414-1/4
12-1/4 6-13/16
1 1 17-7/16 10-3/16 5 14-1/4 14-5/16 10-3/8
12-1/4 6-13/16
1/2 1 17-1/16 10-3/16 5 14-1/4 14-3/8 10-3/8
5 14-1/4 14-3/8 10-3/86-5/161/4 1 17-1/16 10-3/16
F
Max. G Max. L Max. M Max. KB C
E**
Max. A
Capacity
Lift
Speed
Motor
Parts
of
Chain
Y H
27-7/8 9-1/2 7/16
27-7/8 9-1/2 7/16
27-7/8 9-1/2 7/16
28-3/4 10-3/4 3/16
30-1/2 12-1/4 7/32
X***
One & Two Speed Hoists
• Single speed standard. Optional 2-speed or variable frequency
control available for precision load spotting for both hoist and trolley
motions.
• Heavy duty AC spring set hoist motor brake with easy 1-step
adjustment procedure.
• Trolley worm gear design provides smooth stopping performance.
• Hoist gearing totally enclosed in oil-bath lubrication for long life.
• Weatherproof NEMA-4X enclosed push-button control.
• Paddle Type upper & lower hoist travel limit switch.
• Manguard hoist overload protection prevents lifting excessive loads.
• All hoists and trolleys are built in compliance to ASME/ANSI B30.16
& CSA standards, NEC electrical codes and are ISO 9001 certified.
1/4, 1/2, 1 & 2 Ton Trolley
§ This dimension becomes 11-5/16” for 2-speed and 2-1/2 Hp models only
3 Ton Trolley
Specifications & Dimensions
* Two speed hoist has a 1/2 H.P. motor
** Maximum length between one & two speed model hoists. Consult factory for exact dimensions.
*** Dimensions based on lifts thru 30 ft (1/4 - 1 Ton capacities), thru 15 ft lift (2 Ton capacity) and thru 10 ft lift (3 Ton capacity)
5
Page 6
VFD Hoist
A B X**
Hook Lug Hook Lug Hook Lug
tons FPM H.P. lbs in in in in in in in in in in in in
BEHC2516V 16 1/4 77
BEHC2532V 32 1/2 80
BEHC2564V 64 1 77
BEHC5016V 16 1/2 80
BEHC5032V 32 1 81
BEHC0108V 8 1/2 88
BEHC0116V 16 1 89
BEHC0132V 32 2-1/2 95
BEHC0204V 4 1/2 110
BEHC0208V 8 1 111
BEHC0216V 16 2-1/2 112
BEHC0305V 5 1 136
BEHC0310V 10 2-1/2 146
1/4
1/2 11-1/8 11-3/16
Capacity
Hoist
Catalog #
Parts of
Chain
Motor
Lift
Speed
1
1 16-13/1616-3/4
Y
27-5/827-1/2
27-7/8
9-1/2
9-1/2
9-1/2
16-3/4
17-1/2
23 32-5/8
27-3/4
33-1/2
14-1/45 6-5/16 15/16
3 25-7/8 26-5/16
1
3
2
1
2
14-3/8 14-7/8 14-1/47-7/8 7-1/8
11-3/16
11-7/16 11-3/8
13-1/8
16-13/16
17-3/8
22-1/16
11-1/8
14-1/4
5
10-3/4
12-1/45-7/8 2 38-7/8 39-1/4
2-9/16
1-1/16
Net
Weight
5-1/16
2-9/16
2-15/16
4-9/16
6-5/16
12-3/16 6-3/8
14-1/4 27-5/815/16
1-1/85-1/8 14-1/4
DC
6-5/16
27-1/2
GF
E*
Max.
A
H
Y
X
B
13 7/16
2 11/16
5 3/8
F
E
C
D
A
H
Y
X
B
13 7/16
2 11/16
5 3/8
E
C
D
TREAD LINE
• Variable speed control with single speed motor
• Minimizes high-starting current on motor which helps
keep it cool extending life of motor and also permits
increase in motor run-time and starts/stops over
standard contactor control.
• Electronic reversing, multispeed operation (up to 3
steps) eliminates conventional magnetic contactors
which are wearable components
• Voltages available are 380-460/3/60, 208-230/3/60
and 208-230/1/60
• 10:1 speed ratio permits precise positioning
for load spotting
• H4 duty rating
• 2-step infinitely variable push-button control standard.
3-step also available
• Thermal overload protection
• Fault recorder helps troubleshoot various problems
such as power related issues.
• 3 programmable outputs
Hook Mount
Lug Mount
Specifications & Dimensions
6
* Maximum length for 3 phase model hoists. Consult factory for exact dimensions.
** Dimensions based on lifts thru 30 ft (1/4 - 1 Ton capacities), thru 15 ft lift (2 Ton capacity) and thru 10 ft lift (3 Ton capacity)
Page 7
Electric Hoist Options & Accessories
WEATHER RESISTANT
Weather resistant options such
as water resistant covers, zincplated load chain, upper & lower
hooks and sealing of electrical
joints permit the hoist to be
used for out door applications.
HOOK SUSPENSION
Standard on all electric hoists.
Hook suspension provides
portability allowing the hoist to be
moved throughout a facility.
HEAVY DUTY RIGID MOUNT
TROLLEYS FOR HEAVY
DUTY SERVICE TRAVERSE
APPLICATIONS
Designed for use specifically with
BUDGIT®lug mounted electric chain
hoists. The wheels are heat treated
forged steel with dual tread design
for operation on either “S” or wide
flange beams. Sealed precision ball
bearings and heavy gauge steel
side plates provide a heavy duty unit.
Optional drop lugs available.
LUG SUSPENSION
BRACKETS
Used to convert hoists from hook to
lug suspensions. Must be used to
accommodate rigid mount push,
hand-geared and motor-driven trolleys.
FOOD &
PHARMACEUTICAL
SERVICE OPTIONS
Clean hoist (no paint) or FDA
approved epoxy enamel paint,
stainless steel load chain, hooks
& lower block, and food grade
lubrication.
LINK CHAIN
Link chain hoists are ideally
suited for applications requiring
heavier capacities, faster
hoisting speeds and/or heavier
duty cycles.
PUSH-BUTTON STATION
All motions can be controlled from
a convenient, easy to operate
NEMA 4X push-button station.
Push-button stations are available
for one and two speed, or variable
frequency applications.
CABLE REELS
Spring loaded reels keep power
conductor cables taut and out of
the way. Suitable for use with
BUDGIT®and other electric hoists
and trolleys. Cable reel is stationary
type with a 340° pivot base.
7
Loading...