CSV-3103D MANUAL
www.club-3d.com
Dual Monitor Support
Supports BC 1.2 charging for fast charging your compatible devices
DP or HDMI™ resolution up to 3840 x 2160@30Hz
DVI resolution up to 2048 x 1152
Compatible with USB 3.0/2.0 specification
Audio 2.1 channel connection 3.5mm Jack
Microphone connection 3.5mm Jack
Supports Gigabit Ethernet 10/100/1000
3 x USB 3.0 output ports
Supports Windows, Mac OSX, Android, Ubuntu and Chrome
USB 3.0 4K Docking Station
DisplayPort HDMI™
3x
USB
3.0
3x
USB
3.0
BC
1.2
QUICK
CHARGE
BC
1.2
QUICK
CHARGE
4K
ULTRA
HD
4K
ULTRA
HD
DUAL
MONITOR
DUAL
MONITOR
AUDIO
JACK
3.5mm
AUDIO
JACK
3.5mm
FULLHDFULL
HD
DISPLAY
PORT
DISPLAY
PORT
CSV-3103D MANUAL
Introduction
www.club-3d.com
Headphone
Microphone
Notebook
Ethernet
USB 3.0 Devices
DVI Monitor
Power
2x USB 3.0 Devices
Power Led
The USB 3.0 3 to 2 4K Docking Station is designed for extra connectivity demands.
With the docking station, you can extend the connection of a computer to more USB
peripherals, Ethernet network, the speaker and the microphone through one single
USB cable.
With the built-in USB 3.0 ports, the docking station enables you to enjoy the super
speed data transmission between USB peripherals. Aside from USB 3.0, this product
is compliant with USB 2.0/1.1 specification. You will be able to keep and use your
USB 2.0/1.1 devices as usual.
In addition, the docking station is equipped with video output. With the DVI, HDMI
and DP ports, you can mirror your primary screen, or extend the Window desktop
allowing visibility of more applications at the same time. Enhanced expansion
capability plus the stylish appearance, this docking station with video is the most
versatile accessory that also complements your home or office space.
• Incorporates HDMI® technology
NOTE: The DP and HDMI connectors can only be used
one at a time. Slide the lid in front of the two connectors to uncover the connector
you want to use and connect it to the monitor. For example, to use the HDMI
connector, slide the lid to the front of the DP connector to uncover the HDMI
connector, and then connect it to the HDMI monitor.
Please note that when using the DP (or HDMI) and the DVI connector
simultaneously, the DP (or HDMI) connector will not be able to reach 4K resolutions.
USB 3.0 4K Docking Station
Product Overview
CSV-3103D MANUAL
USB 3.0 4K Docking Station
www.club-3d.com
Package contents
Specification
Features
System Requirements
• OperatingSystems:
- Microsoft: Windows® 7 SP1 or later/ Windows® 8/ Windows® 8.1
Before installation, check the items in the package. The package should contain the
following items:
• USB 3.0 3 to 24K Docking Station x1
• USB Cable x1
• Power Adapter x1
• CD(Driver and User’s Manual) x1
• USB3.0downstreamportx3
- Downward compatible with USB 2.0/1.1
- One USB port supports BC 1.2 charging
• DisplayPort
- DP/HDMI: resolution up to 3840x2160 pixels *
- DVI: resolution up to 2048x1152 pixels
• Supportaudio2.1channel
• SupportGigabitEthernet
NOTE: Please note that when using the DP (or HDMI) and the DVI connector simultaneously, the
DP (or HDMI) connector will not be able to reach 4K resolutions.
* The DP and HDMI connectors can only be used one at a time. Slide the lid in front of
the two connectors to uncover the connector you want to use and connect it to the
monitor. Please note that when using the DP (or HDMI) and the DVI connector
simultaneously, the DP (or HDMI) connector will not be able to reach 4K resolutions.
www.club-3d.com
Caution: DO NOT connect the docking station to a computer before installing the provided
driver. Note that the screenshots on this user's manual may vary slightly from each operating
system. Windows® 7/ Windows® 8/ Windows® 8.1
1. Insert the provided CD into your disc drive.
2. Click Run Autorun.exe to start the installation.
CSV-3103D MANUAL
USB 3.0 4K Docking Station
If the AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in
the driver folder to launch the setup.
Enter the administrator password and then click Yes to start the installation if a User Account
Control dialog box appears.
3. Click I Accept for the next step.
4. Be patient with the installation procedure.
5. Connect the Docking Station to a computer after the driver installation is completed.
For connection details, refer to the chapter of Connection.
6. When the operating system detects the docking station, the reminder message will appear on
the system tray.
Installation
NOTE:
www.club-3d.com
Verifying the installation Display configuration
To verify the driver of the adapter, follow the step below. 1. Following the path to open the device
manager. Windows® 7:
Control Panel\ System and Security\ Systems\
Device manager
Windows® 8/ Windows® 8.1:
Settings\ Control Panel\ System and Security\ System\ Device manager
2. You will find Display Adapter device listed as below.
*Actual strings depend on your operating system. The screen shots are from Windows® 8 and
might vary slightly for each operating system.
NOTE:
If you cannot find the driver in the list, the driver may not be properly installed. Please delete the
item, unplug the adapter and repeat the installation steps.
NOTE: The following screenshots in this section are
using Windows® 7 operating system. It may not match your operating system but the definitions
of buttons, tabs and menus are the same.
Utility settings
The supplied utility allows configuring the display mode, screen rotation, screen resolution, and
physical arrangement of your monitors.
1. Click utility icon in Windows System Tray.
NOTE: If you cannot find the icon in Windows System Tray, click arrow icon to bring up icon list to
find it.
2. Select a preferred option, and then click it using
mouse.
CSV-3103D MANUAL
USB 3.0 4K Docking Station
www.club-3d.com
Description of the settings
CSV-3103D MANUAL
USB 3.0 4K Docking Station
www.club-3d.com
CSV-3103D MANUAL
USB 3.0 4K Docking Station
Multi-monitor configuration
The DP, HDMI and DVI monitors can be connected through the Docking Station if monitors are
already connected to the PC. Once extra monitors are
connected, it can be configured to use either “mirror mode”, “extended mode” or be the primary
display. NOTE: The DP and HDMI connectors can only be used one
at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and
connect it to the monitor.
Windows® 7/ Windows® 8/ Windows® 8.1
Position the mouse anywhere on the Windows Desktop, Right-click and select Screen Resolution.
Alternatively, click the utility icon in the Windows System Tray, and then select DisplayLink
Manager or Video Setup.
Extended mode
1. Refer to the Windows system configuration section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the Multiple Displays > Extend these displays on Window® 7/ Window® 8/ Window® 8.1.
4. Click OK to confirm and close the settings screen.
5. Once the setting is completed, simply drag and drop the application icons or the opened
windows to the add-on monitor. However, some applications may not support to display on the
extended desktop.
Cursor disappeared
If the status remains in the extended mode but the adapter is disconnected, the desktop will still
be panned to the add-on monitor. The cursor may not be found on the primary monitor in such a
case. If it happens, connect the add-on monitor through the adapter again or keep moving the
mouse.
Video playback in extended mode
If the video or DVD playback quality is poor or low performance in extended mode, please playback
it on the primary monitor instead of the add-on monitor.
Mirror mode
1. Refer to the Windows system configuration section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the Multiple Displays > Duplicate these displays on Window® 7/ Window® 8/ Window® 8.1.
4. Click OK to confirm and close the settings screen.
Switch the primary monitor
1. Refer to the Windows system configuration section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the box of Make this my main display on Window® 7, or Set as Main Monitor on
Windows® 8/ Windows® 8.1.
NOTE: For some computers, you may need to disable the main display by unchecking the
box of Extend the desktop onto this monitor
or Extend my Windows desktop onto this
monitor.
4. Click OK to confirm and close the settings screen. Windows shortcut
Press Windows button + P to bring up the menu as below, and then select a desired option.
This function is available for Windows® 7 / Windows® 8 / Windows® 8.1.
www.club-3d.com
CSV-3103D MANUAL
USB 3.0 4K Docking Station
Supported resolution
Before adjusting the resolution, refer to the table below for the supported resolution.
* Note that interlaced modes and reduced blanking modes are not supported.
www.club-3d.com
CSV-3103D MANUAL
USB 3.0 4K Docking Station
Audio configuration
By default, when the docking station is connected to a computer, the audio configuration may be
changed to USB (Multimedia) Audio Device automatically (this setting depends on models). If it
does not work, follow the steps below to setup.
Windows® 7/ Windows® 8/ Windows® 8.1
1. Open Control Panel and then select the hardware and sound icon.
2. Click Sound > Manage audio devices and then select USB Audio Device or Displaylink Audio.
1. Open Control Panel and then select the hardware and sound icon.
2. Click Sound > Manage audio devices and then select USB Audio Device or Displaylink Audio.
Uninstall the driver
1. Follow the instructions to find the driver path, and then right-click on DisplayLink Graphics to
uninstall the driver.
Widnows® 7
Control Panel > Programs > Programs and Features > Uninstall or change the program
Widnows® 8/ Widnows® 8.1
Settings > Control Panel > Programs > Uninstall a program
2. Click Yes to confirm the uninstallation.
3. Click Yes to restart your computer. You can also disconnect the video connection now.
Loading...