Club 3D CSV-1564 operation manual

CSV-1564 QUICK INSTALLATION GUIDE

黑色外壳 印字冷灰8C

RED cable
USB type C for charging

SD

Thank you for purchasing our CSV-1564 Product.

After unpacking the product, please make sure you have all the items provided and checked for any
damages. In case of any missing/damaged parts please inform your supplier immediately.

You should have :

• CSV-1564 Docking Station

• PowerSupply (CAC-1902)

• 2x USB TypeC cable, 1x connection to Host(0.27m / 0.886ft), 1x RED cable USB type C for charging to PowerCharger (1m / 3.28ft)

• Quick Install Guide

Please make sure that :

• Your Host System has the latest drivers updates installed

• Your Host System supports DisplayPort Alt Mode

• Follow the QIG installation step

Cable USB type C

1. Please connect the black USB type C cable clicked onto the Dock and connect, the angled connector, to the Dock at that side of
the Dock, connect the other side of that cable to the USB Type C port of your NoteBook/Host system.

2. Connect your preferred Display(s) to the designated connector(s) and power on your Display unit(s) , peripherals, ethernet
and/or sound devices

3. Connect the RED USB Type C cable in the Power Charger into the USB Type C connector and the other side to the Marked
“ RED’ USB Type Connector on the Dock.

4. Now Plug the Power Charger in a wall socket and switch the Dock ON, the BLUE indicator should be lit !

No need to connect your Host system to the Power Charger, our Dock will Dynamically Charge your Host system.
You’re ready to start working and enjoy the full benefits of our Dock.

For any Questions please check our forum section on our website www.club-3d.com

CSV-1564 QIG Rev. 21-April-2020